Munich. The BMW Group is the first automotive manufacturer to launch a completely newly developed digital nervous system for all drivetrain variants and vehicle segments. It is more intelligent, more powerful and more efficient and will be rolled out for the first time in the models of the ##Neue Klasse##. Four high-performance computers, also called "Superbrains", consolidate the computing power for the most important customer functions: infotainment, automated driving, driving dynamics, and basic functions such as vehicle access, climate control, and comfort. The four #Superbrains provide more than 20 times the computing power compared to the current vehicle generation and are already designed for upcoming software and function updates, including AI-powered customer experiences.

"Technology openness is the key to BMW's success. Starting with the first model of the Neue Klasse, we will roll out the technologies of the Neue Klasse across the entire future model portfolio – across all segments and all drivetrains. This also applies to our completely newly developed electronic architecture made up of powerful 'Superbrains' and highly interconnected software platforms. This architecture allows us to decouple the development of the vehicle and software from each other. The advantage: More than ever before, all future BMW models will remain digitally up to date via over-the-air upgrades and will receive updates even from the next and subsequent vehicle generations," says Frank Weber, Board Member for Development at BMW AG.

A fundamental component of the digital nervous system is the radically simplified wiring harness. It is based on a so-called zonal wiring harness architecture, which uses 600 meters less wiring and brings 30% weight savings compared to the previous generation. The wiring harness is divided into four zones: front end, center, rear and roof. The Superbrains are connected via high-speed data connections to smaller control units, the zonal controllers, which manage and consolidate the data flow of the electronics in and out of the zones. The wiring in the vehicle is therefore zone-related and can thus be shorter, thinner, and lighter.

A crucial prerequisite for thinner and lighter wiring are the so-called "Smart eFuses". These are digital fuses that replace up to 150 traditional fuses. ##Smart eFuses## can be intelligently programmed for digitally controlled energy distribution to components. The selective activation of components allows for the design of intelligent power modes for various vehicle states such as driving, parking, charging, and upgrading, in which unnecessary consumers can be identified and switched off. Thus, the eFuses make a significant contribution to the 20% improved energy efficiency.

The completely newly developed electronic architecture forms the basis for the next generation SDV. From the launch of the Neue Klasse, the upcoming BMW model generation will benefit from it. The first fully electric derivative of the Neue Klasse will go into series production later this year at the Debrecen plant (Hungary).

The advanced software architecture of the BMW Group builds on this new electronic architecture. With the multitude of digital functions in SDVs, it is crucial that functions can be continuously developed on stable software platforms rather than being newly developed for every new generation. This is precisely what is achieved with the Neue Klasse. In the vehicle the software platforms run on the respective Superbrains, and the vehicle functions run on top of them. The "Shared Service Layer" acts as a connecting element (middleware) and provides, among other things, state-of-the-art cybersecurity and flexible over-the-air updates. It also enables customer-relevant AI functions thanks to intelligent networking of cross-domain data sources.

"With the introduction of the Neue Klasse, we are entering a mode of software development where we achieve software continuity. This means we continuously develop software rather than starting from scratch each time," says Christoph Grote, Senior Vice President BMW Group Electronics and Software. "Based on our advanced software architecture and the fact that today our global development teams generate 130 times more software than ten years ago, we see ourselves in an excellent competitive position. More than ever, our software developers can focus on product innovations."

For the Neue Klasse, the development teams are working on well over 1,000 software modules, around 40 GB of software, and over 500 million lines of code, which will ultimately be integrated into the Superbrains and the rest of the electronic architecture in the vehicle. To achieve this, the BMW Group has established a solid foundation for future-proof and highly effective vehicle software development in recent years. Innovative methods and tools have been anchored in the continuously growing global developer network. At the heart of vehicle software development is the integrated developer environment: a tailored tool-chain called "CodeCraft." The speed and quality of development have been enhanced with the use of a variety of tools that support the software developer with generative AI. CodeCraft runs in the cloud on up to 75,000 virtual CPUs, supports the simultaneous work of well over 10,000 software developers, and records up to 200,000 software builds per day at peak times. This corresponds to a productivity increase of more than 130 times compared to ten years ago.

Munich, Dingolfing, Leipzig. The BMW Group is systematically advancing the digitalisation and automation of its production processes within the BMW iFACTORY framework. Since 2022, the company has been testing Automated Driving In-Plant (AFW) for new vehicles at its largest European plant in Dingolfing. Following successful CE certification, the pilot project is now transitioning into series operation.
In addition to Dingolfing, Leipzig is also currently being enabled to implement the AFW project in series operation. Other facilities in the BMW Group production network are set to follow in stages.

“Automated Driving In-Plant optimises our production process and delivers significant efficiency gains for our logistics,” explains Milan Nedeljković, member of the Board of Management of BMW AG responsible for Production. “That is why we will be swiftly rolling out this technology throughout our production network.”

In addition to the BMW 5 Series and 7 Series in Dingolfing, this technology is now also being used for the MINI Countryman and other BMW models in Leipzig. In Dingolfing the new vehicles drive fully autonomously – without a driver – along a route of more than one kilometre, from the two assembly halls, through the “short test course”, to the plant’s finishing area. This is made possible by sensors installed along the route – creating the largest LIDAR infrastructure in Europe – and relying on an externally generated environment model and an external movement planner. Regardless of the vehicle's equipment options, this system controls its automated movements, using state-of-the-art cloud architecture. Parts of the technology were provided by the young Swiss company Embotech AG, which the BMW Group already cooperated with in the early stages through its venture client unit, the BMW START-UP Garage.

Plant Leipzig plans to introduce automated driving for around 90 percent of the BMW and MINI models built there, with Plants Regensburg and Oxford set to follow in 2025. The new site in Debrecen, Hungary, will also implement this technology from the official launch of series production.

Going forward, the BMW Group plans to expand its use of Automated Driving In-Plant to other areas of production, such as for driving through the testing zone and in outdoor distribution areas. Production and development experts are also working closely together to refine the technology in-house. Another key factor in expanding the technology is the increasing use of on-board technology, which will support the external sensors in the long term.

“Over the next ten years, we will log several million test kilometres with Automated Driving In-Plant in our production network alone,” says Nedeljković. “In this way, the BMW Group is once again setting a new benchmark for automation and digitalisation of its production processes – while paving the way for future applications in the field of autonomous driving.”

Munich. BMW is the first carmaker in the world to receive approval for a combination of a Level 2 driving assistance system (the BMW Highway Assistant) and a Level 3 system in the form of the BMW Personal Pilot L3 in the same vehicle. The new BMW 7 Series therefore sets a milestone in the field of automated driving by offering a unique opportunity to enjoy the benefits of both systems in the same car.

BMW Highway Assistant (Level 2): greater comfort on long journeys.
This advanced Level 2 feature enhances comfort significantly on long-distance journeys especially thanks to its ability to operate at speeds up to 130 km/h (81 mph). The BMW Highway Assistant is an additional function of the Steering and Lane Control Assistant that can be used on motorways with structurally separated carriageways. On such stretches of road, the driver is able to take their hands off the steering wheel for longer periods and position them comfortably, provided they continue to pay attention to what is happening on the road and are able to take over the steering again at any time.

While driving in partially automated mode, the BMW 7 Series Sedan is also able to make lane changes without the driver having to take hold of the steering wheel again. This is made possible by the Active Lane Change Assistant, which performs the necessary steering movements for the overtaking manoeuvre and adjusts the vehicle’s speed as required as soon as the traffic situation permits. Plus, the driver is able to initiate a lane change suggested by this system by simply looking in the exterior mirror to confirm it.

BMW Personal Pilot (Level 3): allowing other in-car activities in traffic jams.
Highly automated Level 3 driving means drivers can take their hands off the steering wheel and temporarily turn their attention away from the road. The BMW Personal Pilot L3 feature in the 7 Series offers a whole new driving experience by enabling drivers to fully delegate the task of driving to their car under certain conditions at speeds up to 60 km/h (37 mph) and look away from the road. Highly automated systems are capable of completely taking over the driving in specific situations, e.g. in traffic jams on the motorway. This even lets drivers carry out other in-car activities, such as making phone calls, reading, writing messages, working or streaming videos. However, the driver must always be prepared to reassume control within a few seconds when prompted by the car, for example when there are roadworks.

The combination of all these driving assistance systems within a single vehicle represents a significant advance and offers a comprehensive set of functionalities for a more comfortable, more relaxing drive over both long and short journeys. “We are setting new standards in the automotive industry by combining both technologies in the new BMW 7 Series,” says Dr. Mihiar Ayoubi, Senior Vice President Driving Experience BMW Group. “In the process, we are underlining our commitment to offering our customers a safe, comfortable and innovative driving experience.”

The BMW Highway Assistant and Driving Assistant Professional are both part of the optional BMW Personal Pilot L3, which is available exclusively in Germany priced at € 6,000 (incl. VAT). Drivers of cars equipped with the optional BMW Personal Pilot L3 that have already been delivered will be able to add the BMW Highway Assistant to its range of functions free of charge from 08/24.

Munich/Sölden. To round off the year, BMW is inviting international media to Sölden, to Innovation @Summit, on the Austrian glacier. Absolute highlight: in addition to the BMW 5 Series launched in October, innovative highlights in the areas of driverless@Developement, artificial intelligence and highly automated driving will be presented. During intensive test drives under winter conditions, the smart business sedan and Driverless @Developement vehicles can demonstrate their dynamic driving qualities several times over.

If you have any questions, please contact:

Press and public relations

Dieter Falkensteiner, Spokesperson BMW Group Driving Experience
Telephon: +49-89-382-51813
Mail: Dieter.Falkensteiner@bmwgroup.com


Christophe Koenig, Head of BMW Group IT, Digital Driving Experience Communications
BMW Group Design, Innovations and Digital Car Communications
Telephone: +49-89-382-56097
Mail: Christophe.Koenig@bmwgroup.com

Munich. Level 3 highly automated driving, which allows drivers to take their hands off the steering wheel and temporarily divert their attention away from the road, will soon be available in the new BMW 7 Series. BMW Personal Pilot L3 is the name of the new function that relieves the person at the wheel of the task of driving in certain situations and controls the car’s speed, distance to the vehicle ahead and lane positioning for them. This new option can be ordered for the new BMW 7 Series (excluding the i7 eDrive50 and i7 M70 xDrive)* from December to be fitted in vehicles from next March.

Designed to assume the entire task of driving with Level 3 capability as defined by the Society of Automotive Engineers (SAE), thehighly automated driving function will be offered exclusively in Germany priced at 6,000 euros (incl. VAT).

This innovative technology allows drivers to redirect their focus to other in-vehicle activities when travelling at up to 60 km/h (37 mph) on motorways with structurally separated carriageways. Thanks to its particularly sophisticated sensors, this is the first system of its kind that can also be used in the dark.

The introduction of Level 3 functionality in BMW 7 Series models will make the BMW Group the first carmaker to offer both an advanced Level 2 driving function in its product portfolio where the hands can be taken off the steering wheel and positioned comfortably and a Level 3 system. The BMW Highway Assistant already offers a highly innovative SAE Level 2 partially automated driving function in all new BMW 5 Series models. The package also includes a unique feature in the form of the Active Lane Change Assistant with eye confirmation. This function is primarily designed for use over long-distance journeys in the new BMW 5 Series, allowing the driver to adopt an extremely relaxed posture behind the steering wheel. When travelling at up to 130 km/h (81 mph), this additional function of the Steering and Lane Control Assistant can take control over the car’s speed, the distance to the vehicle in front and the car’s steering.

The crucial difference between Level 2 and Level 3 is that with Level 2 (partially automated driving) responsibility continues to lie with the driver at all times. Whenever the BMW Highway Assistant is in use,drivers must watch what is happening on the road and be able to take over the task of driving again at all times. This is continuously monitored using an intelligent attentiveness camera.

The BMW Personal Pilot L3 for Level 3 highly automated driving in the BMW 7 Series gives drivers the option of concentrating on secondary in-vehicle activities away from what is happening on the road. In a BMW 7 Series with the BMW Personal Pilot L3 activated, customers will be able to edit e-mails, for example, or engage more deeply in telephone calls while travelling at up to 60 km/h (37 mph). They can also use digital services for e.g. streaming videos from various providers on the central display during a journey. This makes the new BMW Personal Pilot L3 the ideal solution for making good use of time spent in slow-moving traffic or tailbacks during daily motorway commutes.

Symbols appear on the display behind the steering wheel as appropriate to indicate whether the BMW Personal Pilot L3 is available. It is activated and deactivated by a button on the steering wheel. When the function is being used, the customer still has to be ready to reassume the task of driving at any time – i.e. as soon as the situation on the road requires them to or the stretch of road suitable for using the BMW Personal Pilot L3 comes to an end. Visual and acoustic signals let the driver know they have to take over control once more. If the driver does not respond as required, the vehicle is brought to a controlled standstill.

The live HD map with precise routes is permanently aligned with extremely accurate GPS location-finding and works with 360° sensors to ensure exact positioning and monitoring of the area around the vehicle. The live HD map is always up to the minute thanks to regular updates. In the new BMW 7 Series, this functionality is underpinned technologically by a new software stack, a powerful computing platform and a 5G link-up to the BMW Cloud. Besides the cameras, vehicles specified with the BMW Personal Pilot L3 are also fitted with latest-generation ultrasonic sensors and radar sensors and a highly sensitive 3D lidar sensor for monitoring the area around the vehicle and the situation on the road.

This package of technology means that the BMW Personal Pilot L3 works very reliably even in the dark. These various qualities are unmatched by any rival. SAE Level 3 automated driving helps improve both comfort and safety on public roads.

*The BMW Personal Pilot L3 is only available in conjunction with the relevant BMW Connected Drive services. The period of validity for these services is two years.

Munich. The BMW Group is increasingly relying on innovations from the fields of digitalisation and Industry 4.0 in production logistics. This will ensure the company’s global production network continues to receive the parts it needs in a timely and reliable manner in the future. The focus is on applications such as logistics robots, autonomous transport systems at plants and digitalisation projects for an end-to-end supply chain. Staff can control logistics processes from mobile devices such as smartphones and tablets and use virtual reality applications to plan future logistics. Innovations coming out of many pilot projects are being implemented worldwide in logistics at BMW Group plants.

“Logistics is the heart of our production system. Our broad spectrum of ground-breaking projects helps us run increasingly complex logistics processes efficiently and transparently,” according to Jürgen Maidl, head of Logistics for the BMW Group production network. “We are taking advantage of the wide range of available technological innovations and working closely with universities and start-ups. We are already working with tomorrow’s Industry 4.0 technologies today.”

Around 1,800 suppliers at more than 4,000 locations deliver over 31 million parts to the 30 BMW Group production sites worldwide every day. Digitalisation and innovations help the company organise logistics more flexibly and more efficiently. At the same time, almost 10,000 vehicles coming off the production line daily must be delivered to customers around the globe. Digitally connected delivery, so-called Connected Distribution, ensures that these transport routes are also more transparent.

Connected Supply Chain: Full data transparency in the supply chain

The BMW Group supply chain relies on a global supply network and close cooperation with numerous logistics service providers. The Connected Supply Chain (CSC) programme significantly increases supply chain transparency. It updates the plants’ material controllers and logistics specialists on the goods’ location and delivery time every 15 minutes. This transparency enables them to respond immediately if delays appear likely and take appropriate steps early to avoid costly extra runs.

Autonomous transport systems both inside and outside

Autonomous transport systems such as tugger trains or Smart Transport Robots are increasingly used to transport goods within production halls.

To allow tugger trains to now also be used for the sophisticated process of supplying assembly lines, as part of a pilot project, BMW Group Plant Dingolfing has developed an automation kit, which enables conventional tugger trains of any brand already on hand to be upgraded to autonomous tugger trains. The capabilities of these driverless tugger trains go beyond automation of earlier solutions.

Another future technology is also being piloted alongside autonomous tugger trains at the Dingolfing plant. A Smart Watch supports logistics staff during the container change process and announces approaching tugger trains via a vibration alarm. The employee can also read which containers should be unloaded and send the tugger train on to its next destination by tapping the display.

The BMW Group is also pioneering the use of autonomous transport systems outdoors. As part of a pilot project, the BMW Group is using an autonomous outdoor transport robot for the first time at its Leipzig plant to bring truck trailers from where they are parked to the unloading and loading bay on their own. A mobile platform drives underneath the trailer, connects it and steers it through the plant. The so-called AutoTrailer, with a payload of up to 30 tons, navigates by laser, without additional guidelines or markings, through the plant’s outdoor areas. Sensors and cameras provide a 360° all-round view, which forms the basis of the safety concept.

The huge potential of this transport system is particularly evident at the BMW Group’s largest plant in Spartanburg, where about 1,200 of these trailer-shunting manoeuvres take place every day.

Back in 2015, the BMW Group joined forces with the Fraunhofer Institute IML to develop the first self-driving Smart Transport Robots (STR) for transporting roll containers through logistics areas within production halls. The second generation is now in operation at BMW Group Plant Regensburg. The flat robots carry roll containers weighing up to one ton and transport them autonomously to where the goods need to be. They calculate the ideal route independently and move freely through space. A built-in battery module from the BMW i3 powers the STR for a whole work shift.

Loading and unloading of goods containers:
Robots take over arduous tasks and relieve staff

After delivery to the plant, the goods are transported to the assembly line in containers and parts containers of various sizes. For the tiring job of reloading containers from pallets onto conveyor belts or into storage, employees will be assisted in the future by logistics robots specially developed for this purpose. Four different types of robots, referred to as "Bots" by logistics experts, are currently being tested or have already been integrated into series production.

The lightweight robots take on different jobs: they can take full plastic boxes from the pallet in the incoming goods area and place them on a conveyor system, they do unload tugger trains and place boxes loaded with goods on a shelf, they collect various small parts from appropriate supply racks and they stack empty containers on pallets before they re-enter circulation.

Using artificial intelligence, the robots can detect and process various different containers and determine the ideal grip point.

Smart devices support logistics staff in paperless logistics

Gloves with integrated scanners and displays, data glasses and smart watches are increasingly used to support logistics employees. The transition to paperless logistics, with digitally labelled containers and shelves, opens up new areas of application for mobile devices. Glove scanners read the electronic label and indicate the exact contents of the small load carrier on a small display that can be worn on the arm.

Virtual reality and artificial intelligence

The use of virtual reality already plays an important role in planning logistics spaces. In a virtual environment, planners can quickly and efficiently lay out future logistics areas completely and assess how much space is needed, for instance. Planning is based on 3D data representing the real structures of a logistics hall. For the past several years, the BMW Group has been capturing its plants in digital form with millimetre accuracy, using special 3D scanners and high-resolution cameras. This creates a three-dimensional image of the structures, so that manual recording on site is no longer needed. When planning future logistics areas, BMW Group experts can now combine existing data with a virtual "library" of shelves, lattice boxes, small load carriers and around 50 other widely-used operating resources.

Connected Distribution:
Vehicle delivery transparency from plant to showroom
Like delivery of parts to plants, the transport of vehicles to the dealership is now also digitally and transparently traceable. The former Connected Distribution pilot project was fully integrated into series production this year. The system uses the same IT built into BMW Group vehicles to track the location of finished vehicles once they are ready to leave the plant. The vehicle transmits its current geolocation and status to the logistics centre via a mobile connection every time it is switched off.

Focus on sustainability: Natural gas, electric and future hydrogen trucks will reduce CO2 emissions

Logistics can help the BMW Group achieve its sustainability goals. The focus here is on continuous expansion of CO2-efficient modes of transport. More than 60 percent of all new vehicles now leave production plants by rail.
Nevertheless, it is still necessary to use trucks on certain in- and outbound logistics routes. To reduce emissions from these truck journeys, the BMW Group is already using natural gas and electric trucks in cooperation with logistics service providers. The aim is to reduce truck emissions by 40% by 2030 and to be completely emission-free by 2050.

• In teaming up with KPIT and TTTech, the BMW Group has chosen software partners with a global footprint and proven expertise in the development of both software platforms and autonomous driving technologies.
• The partners will be able to assist with rolling out the software stack within the Autonomous Driving Platform to third parties, thereby facilitating access for OEMs.

Munich. The BMW Group has once again selected expert software development partners, further consolidating its partner network in the process. The aim of the collaboration with KPIT and TTTech is to press ahead with the scalable Autonomous Driving Platform and to work together on the development of Level 3 and Level 4/5 functions (Highway Pilot and Urban Pilot). This move bolsters the BMW Group’s development resources for automated driving and represents another step forward in its quest to expand the platform’s ecosystem and establish the technology in the automotive industry.

KPIT and TTTech will be well positioned to help roll out the software stack within the Autonomous Driving Platform to third parties. This will make it easier to integrate other OEMs and begin offering scalable software solutions across the industry.

“Tackling this immense challenge calls for an all-embracing approach,” said Elmar Frickenstein, Senior Vice President Fully Automated Driving and Driver Assistance, BMW AG Munich. “This includes building strong alliances that allow us to gain valuable know-how and also speed things up. In order to achieve our objective in 2021, we are collaborating with the best technology partners in the world.” This explains the recent development of BMW Group partnerships in the field of autonomous driving.

Since July 2016, the BMW Group has been developing a network of world-leading technology partners to help expand the platform’s footprint. These include Intel, Mobileye, Continental, Magna, FCA, Aptiv and Baidu.

Shanghai. On May 14^th 2018, BMW Group officially obtained the Shanghai Intelligent Connected Autonomous Driving Test License, issued by the Intelligent Connected Vehicle Road Test Promotion Team - consisting of Shanghai Municipal Commission of Economy and Informatization, Shanghai Municipal Public Security Bureau and Shanghai Municipal Transportation Commission.

Thus, the BMW Group has become the first international auto maker to obtain the Autonomous Driving road test license in China, marking a big step on its path to Autonomous Driving. This achievement underlines BMW Group’s leading role in the development of autonomous driving in the Chinese automotive industry.

BMW Group implements its Strategy NUMBER ONE > NEXT worldwide, and continues to carry out the layout in "A.C.E.S.", namely, Autonomous Driving, Connectivity, E-Mobility and Shared services, to create exciting solutions and innovative mobility experiences for customers - and by doing so - speeding up its transformation into a technology company. Autonomous Driving, an important part of the "A.C.E.S." layout, will change the future of individual mobility in a revolutionary way, significantly improving the safety and convenience of premium individual mobility.

China is promoting Autonomous Driving as a part of boosting intelligent connected vehicles (ICVs) and its recent “smart city, smart China” initiative, giving China a vital role in BMW Group´s Autonomous Driving development program. BMW anticipated this development - and was first to demonstrate and publish L3 highly Autonomous Driving on a designated highway under government supervision in Chengdu as early as 2016.

To carry out road tests for the preparation of L4 Autonomous Driving R&D in China, Shanghai is an attractive, innovative city, matching perfectly with BMW Group's vision of future mobility. The BMW Group has set up a strong local team in Shanghai, including over 60 experts in Autonomous Driving.

Using the license, the R&D team will gather several Petabyte of data based on actual traffic, covering its full complexity. This data will be used to train machine learning algorithms performing adequate L4 Autonomous Driving behaviour.

The test sites in Shanghai currently cover a total length of about 5.6 kilometers planned to grow quickly over time. The test fleet is based on the latest BMW 7 Series models, starting with two operating vehicles in May and adding up to seven vehicles by December in China. “Safety first” is the primary premise for the development of Autonomous Driving at BMW Group. Until now, the accumulated mileage reaches nearly 30,000 kilometers of road test in China, and more than 200,000 kilometers of computer simulation.

Dr. Martin Sautter, Senior Vice President, R&D Center BMW Group, BMW China Services Ltd., said:  “The BMW Group has always followed its R&D strategy ‘In China, For China’. We have developed a complete, customer-oriented and prospective R&D system, through the R&D layout in Beijing, Shanghai and Shenyang.  Now, it is a great honour to be the first international vehicle manufacturer to obtain an autonomous road test license in China. With the highest safety standards, we will rigorously promote the local development of Autonomous Driving and strive to achieve a safer, more efficient and more convenient transportation system.”