^{Dodatne informacije na voljo spodaj in v priponki v angleščini.} 

Munich. The new BMW iX3 demonstrates the BMW Group's take on implementing a holistic approach to product sustainability across the entire life cycle. During product development, extensive measures were implemented throughout the supply chain, production and use phases, explicitly focused on conserving resources and reducing the model’s environmental footprint. As such, the Neue Klasse marks an important milestone toward achieving the company's 2030 and 2050 CO₂e targets.
 
CO₂e benefits achievable after only one year of use
The extensive decarbonization measures in the supply chain results in an early break-even point: when charged with electricity from the European energy mix, the CO₂e footprint of the new BMW iX3 50 xDrive is lower than that of a comparable model with a combustion engine after about 21,500 kilometers (WLTP combined). When charged exclusively with electricity from renewable sources, the BMW iX3 50 xDrive beats the comparable ICE model after only 17,500 kilometers (WLTP combined), allowing customers to potentially achieve CO₂e benefits in as little as one year.

Decarbonization in the supply chain
The key levers to reduce CO₂e emissions in the supply chain are the use of secondary materials and renewable energy, alongside product and process innovations. This combination of measures has led to a decrease of CO₂e emissions in the supply chain of 35% during product development.
The Gen6 battery cells of the BMW iX3 high-voltage storage system are made of 50% secondary cobalt, lithium, and nickel materials. In addition, renewable energies are harnessed in the anode and cathode materials and cell production. This is how CO₂e emissions per watt hour were reduced by 42% compared to the Gen5 cell of the previous model.

The BMW Group is increasingly focused on the use of innovative and secondary materials in other components as well. 
For instance, 30% of the secondary raw material  used for the engine compartment cover and the storage compartment under the front hatch is recycled maritime plastic. This post-consumer material consists of old fishing nets and ropes, preventing these materials from potentially being dumped in the ocean.
Secondary aluminum accounts for 80% of the wheel carriers and swivel bearings as well as 70% of the cast aluminum wheels.

‘Design for Circularity’: consistent implementation in the Neue Klasse 
The BMW Group applied the ‘Design for Circularity’ approach consistently in developing the BMW iX3. The approach builds on the concepts of secondary first (the prioritized use of secondary materials), strategic material selection and disassembly optimization. As a result, secondary materials account for one third of all material used in the new BMW iX3 50 xDrive.
One example of implementing these three concepts is the Econeer seat cover, available in the interior trim Essential, whose fabric, adhesive and fleece are all made from PET. This mono-material choice increases recyclability. Moreover, the textile yarn used consists entirely of recycled PET as well.
Other components whose development followed the ‘Design for Circularity’ approach include the center console, instrument panel and interior floor trim.

Significantly improved efficiency in the use phase    
BMW EfficientDynamics involves consistently identifying and harnessing efficiency potential in all vehicle subsystems. Applying this approach, the energy consumption of the new BMW iX3 is 20% lower than in the predecessor model (WLTP combined).
This significant improvement is primarily based on optimized aerodynamic properties, reduced rolling resistance and on-board power consumption as well as the drive’s unparalleled combination of efficiency and dynamics. 

Sustainability-centric production at BMW Group’s Debrecen plant
Designed and built according to the BMW iFactory principles, the new BMW Group plant in Debrecen, Hungary, is fully focused on efficiency, digitalization and sustainability. It is the first BMW Group car factory that is operated and produces vehicles without using fossil fuels, such as oil and gas, under normal operating conditions.
The only energy source to power operations at the site is electricity. According to current planning, up to 25% of the plant's annual electricity needs can be covered by the photovoltaic system located on the premises. The remaining electricity is obtained from other renewable energy sources. Surplus solar energy is stored in a heat storage unit and used to heat the paint shop ovens as needed.
Only 0.1 tons of CO₂e are emitted in the production of a BMW iX3 car, about two third below production at other BMW Group plants.

The BMW Group’s sustainability targets
The BMW Group's commitment to the Paris Climate Agreement and to achieving Net Zero by 2050 or earlier is an integral part of the comprehensive 360° sustainability approach incorporated in the corporate strategy. The company is pursuing ambitious, scientifically derived CO₂e targets for the coming years. For instance, the BMW Group intends to reduce its CO₂e emissions by at least 40 million tons in 2030 (baseline: 2019).

Publicly accessible, TÜV-verified Product Carbon Footprint 
For years, the BMW Group has released its vehicle footprint, which includes a greenhouse gas report for its vehicles verified by Germany’s TÜV Technical Inspection Association. The report for the new BMW iX3 50 xDRIVE can be downloaded here and is also available in the My BMW app. It offers increased transparency regarding raw materials used and CO₂e emissions over the entire vehicle lifecycle.

^{All information regarding the BMW iX3 50 xDrive’s mileage, energy consumption, range, energy content, dimensions, weights, share of secondary raw materials/recycled materials and other technical data and derivations thereof are provisional as of the start of production in November 2025.}

^{All model variants, equipment levels, technical data, fuel consumption and emission data mentioned correspond to the range offered in the German car market, provided the respective model is available there. Deviations in other markets are possible. Dimensions refer to the base model available in Germany; depending on wheel and tire size as well as optional equipment selected, dimensions may vary depending on the specific configuration.}

^{Power consumption and range data were measured in accordance with the mandatory WLTP procedures and comply with the German Passenger Car Energy Consumption Labelling Ordinance (EnVKV). For more information, see www.bmw.de}

^{If you have any questions, please contact:}

^{BMW Group Corporate Communications
Dr. Cornelia Bovensiepen, Spokesperson Sustainability BMW Group
Phone: +49 89 382-94935
E-Mail: Cornelia.Bovensiepen@bmw.de
   
Sofia Elena Rizzi, Spokesperson Product Communications BMW Compact & Mid-size Segments
Phone: +49-151-601-67436
E-Mail: Sofia-Elena.Rizzi@bmw.de}

^{Internet: https://newsroom.bmwgroup.com/global/en
E-Mail: presse@bmwgroup.com}

^{The BMW Group}

^{With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial services. The BMW Group production network comprises over 30 production sites worldwide; the company has a global sales network in more than 140 countries.}

^{In 2024, the BMW Group sold over 2.45 million passenger vehicles and more than 210,000 motorcycles worldwide. The profit before tax in the financial year 2024 was € 11.0 billion on revenues amounting to € 142.4 billion. As of 31 December 2024, the BMW Group had a workforce of 159,104 employees.}

^{The economic success of the BMW Group has always been based on long-term thinking and responsible action. Sustainability is a key element of the BMW Group’s corporate strategy and covers all products from the supply chain and production to the end of their useful life.}

^{www.bmwgroup.com 
LinkedIn: http://www.linkedin.com/company/bmw-group/
YouTube: https://www.youtube.com/bmwgroup 
Instagram: https://www.instagram.com/bmwgroup
Facebook: https://www.facebook.com/bmwgroup
X: https://www.x.com/bmwgroup} 

^{Dodatne informacije na voljo spodaj in v priponki v angleščini.}

Munich. The BMW Group is now offering customers even broader scope for personalising analysis of their driving stats in the My BMW App and MINI App. The latest update allows drivers to view their personal carbon footprint for the first time.

“Our usage research shows: The information in My Trips is one of the most popular features in the app,” says Dirk Wiedmann, Senior Vice President Sales Steering and Strategy, Digitalization. “We are now expanding this successful function with carbon footprint calculation, giving our customers simple and straightforward access to sustainability-related information via a popular and widely used channel.”

Emissions from vehicle production and use: two sets of figures make up the driver’s personal footprint. 
The personal carbon footprint function has been designed with a technology-open approach and is available for vehicles with combustion engines, as well as plug-in hybrid and fully electric models. At launch, this feature will be rolled out across selected models in various European countries*. Calculation of the personal footprint is based on two central sets of figures.

• Emissions from vehicle use: My Trips analyses the routes the driver has completed and uses the energy consumed in the process to work out the CO₂ emitted. To this end, CO₂ equivalents are calculated using data from the International Energy Agency (IEA). For vehicles with combustion engines, the app calculates the amount of CO₂ emitted based on the fuel consumed. For battery-electric vehicles, it shows the emissions generated when using the average national energy mix – and also tells the driver how high emissions would be by comparison if green energy was used.
• Emissions from vehicle production: These are emissions generated during the manufacturing process. Emissions are recorded from the processing of raw materials, procurement of materials, transport logistics and the production of the model at hand. The BMW Group already sets out the emissions figures for numerous models in the form of Vehicle Footprint Reports. These are calculated according to recognised standards for life cycle assessments and certified by the TÜV Rheinland agency. They can also be downloaded from the BMW Group website.

Ready for electric mobility: My BMW App helps with the transition.

The My BMW App also includes the Electric Vehicle Analysis introduced last summer. This function allows customers whose BMW is powered by a combustion engine to simulate how well a fully electric BMW fits their personal driving profile. Here, the customer selects an electric BMW model as an alternative vehicle in the app. Once the combustion-engined model has made at least 200 journeys and covered a distance of 2,000 kilometres (over 1,240 miles), the analysis shows the journeys the user could have completed on a single charge with the electric vehicle selected, and also flags up charging stations close to frequently visited destinations. More than 100,000 customers had used this analysis by May 2025.

Over 14 million customers around the world use the My BMW App and MINI App. The My Trips function is available in more than 90 countries and is actively used by 1.9 million users.

* The new function is available to users of vehicles for which a TÜV-certified carbon footprint has been calculated. The feature will launch in Germany, Austria, Belgium, France, Luxemburg, the Netherlands and Switzerland, and be available in the BMW 1 Series (code 81GE), BMW 2 Series (31GH), BMW X2 (71GM, 21GM), BMW X3 (11GR, 31GP, 65GP), BMW 5 Series (31FK, 11JF, 71FJ), BMW 5 Series Touring (11HH, 11GW, 21GV), BMW M5 (81FK) and BMW iX (41CF) and MINI Cooper (11GC), MINI Cooper C (11GD), MINI Aceman (31GC) and MINI Countryman (41GA, 11GA).

In the event of enquiries please contact:                                                                   

Corporate Communications

Wieland Brúch
BMW Product Communications
Electromobility and Sustainability
Phone: +49-176-601-72652
E-mail: Wieland.Bruch@bmw.de  

Martin Tholund
Spokesperson BMW Digital Car, Electronics and Software, Technology Partnerships, Digital Products and Services
Phone: +49-151-601-77126
E-Mail: Martin.Tholund@bmwgroup.com  

Internet: https://newsroom.bmwgroup.com/global/en

E-mail: presse@bmw.de



The BMW Group

With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial services. The BMW Group production network comprises over 30 production sites worldwide; the company has a global sales network in more than 140 countries.

In 2024, the BMW Group sold 2.45 million passenger vehicles and more than 210,000 motorcycles worldwide. The profit before tax in the financial year 2024 was € 11.0 billion on revenues amounting to € 142.4 billion. As of 31 December 2024, the BMW Group had a workforce of 159,104 employees.

The economic success of the BMW Group has always been based on long-term thinking and responsible action. Sustainability is a key element of the BMW Group’s corporate strategy and covers all products from the supply chain and production to the end of their useful life. 

www.bmwgroup.com

LinkedIn: http://www.linkedin.com/company/bmw-group/

YouTube: https://www.youtube.com/bmwgroup

Instagram: https://www.instagram.com/bmwgroup

Facebook: https://www.facebook.com/bmwgroup

X: https://www.x.com/bmwgroup

^{Dodatne informacije so na voljo spodaj in v priponki v angleščini.}

Munich/Landshut. The BMW Group is presenting its next leap forward in the field of electric drive technology – and in the process ushering in a new era of all-electric driving. At the Tech Days event in Landshut, the company has provided some initial insights into the development and production of high-voltage batteries and electric drive systems using the sixth generation of BMW eDrive technology. Every fully electric Neue Klasse vehicle will enjoy the benefits. The first Neue Klasse model will go into series production later this year at Plant Debrecen in Hungary. Below is an overview of the technology highlights:

• The Energy Master intelligent central control unit on the high-voltage battery – developed by the BMW Group and produced at Plant Landshut.
• A new high-voltage battery concept that, together with the BMW cylindrical cell, promises to bring about a technological quantum leap – including significant improvements in energy density, charging speed and range.
• The BMW Group also demonstrates its technology-openness with electric drive systems – through the use of different electric motor types: SSM and ASM.
• A modular approach to electric motor production gives the BMW Group an exceptional degree of flexibility.
• The BMW Group pools together expertise from the entire electric mobility value chain in Bavaria and Austria – from development, via purchasing and production, to recycling.
• The BMW Group demonstrates both technology-openness and full expertise across all areas of electric mobility.

Adopting a technology-open approach while setting the pace in electric mobility

“For the BMW Group, electric mobility is the future and a key area of growth. We are leading the way with this drivetrain technology. At the same time, we are deliberately taking a technology-open approach, recognizing that mobility needs vary between different regions of the world,” explains Dr Joachim Post, Member of the Board of Management of BMW AG, Purchasing and Supplier Network. “We want to offer our customers the best drive concept for every need. It is possible to do both: offer the best drive technology for every need and be at the forefront of electric mobility.”

Slimmer, faster, further: the high-voltage batteries for Gen6

With the new sixth-generation BMW eDrive technology (Gen6 for short), the BMW Group is making a technological quantum leap. Improvements on the product side include a 30% faster charging speed and 30% increase in range, with certain models achieving even higher figures. Added to which, the Gen6 high-voltage battery concept benefits from the new 800V technology. Gen6 will make its debut this year in the Neue Klasse and subsequently be used to drive models across the BMW Group’s fully electric product range. The concept for the Gen6 high-voltage batteries is fundamentally new and will find applications in all vehicle segments – right up to the high-performance models from BMW M GmbH. Its new, even slimmer design allows the high-voltage battery to be integrated into a spread of different models, regardless of vehicle height. The high-voltage battery takes on the role of a structural component in the bodies of the Neue Klasse models (“pack-to-open-body”), and the new cylindrical cells will be integrated directly into the high-voltage battery (“cell-to-pack”). The new BMW cylindrical cell has a 20% greater energy density than its predecessor, the Gen5 prismatic battery cell. And charging in both directions will be possible: the BMW Group has confirmed bidirectional charging as standard for Gen6.

Highly intelligent central control unit: the BMW Energy Master

All of the elements that enable this technological leap forward come together in the BMW Energy Master. This central control unit is positioned on the high-voltage battery and provides the interface for high- and low-voltage power supply and for data from the high-voltage battery. It also controls the power supply for the electric motor and vehicle electrical system and ensures the safe and intelligent operation of the high-voltage battery. The BMW Group has filed a whole series of new patent applications for the vehicle electrical system, including its electronic fuses. Both the hardware and software of the Energy Master were developed fully in-house at the BMW Group. This ensures technological developments and updates for vehicles can be implemented independently and in real time via Remote Software Upgrades, providing a particular benefit for customers.

“Local for local” approach for high-voltage battery assembly and supplier network

The high-voltage batteries for the Neue Klasse are assembled in five new production facilities that the BMW Group has located close to its vehicle plants as part of a “local for local” approach. For example, cutting-edge assembly locations for Gen6 high-voltage batteries are taking shape in Irlbach-Straßkirchen (Lower Bavaria), Debrecen (Hungary), Shenyang (China), San Luis Potosí (Mexico) and Woodruff, near Spartanburg (USA). This approach safeguards production even in the event of unforeseen political and economic events. In addition, the existing locations are being strengthened, with jobs both secured and created. The “local for local” principle continues in the supplier network for battery cells: in order to cover the demand for Gen6, the BMW Group has reached contractual agreements for five battery cell factories – spread across Europe, China and the USA – with various partners.

“Cell-to-pack” and “pack-to-open-body”

Production of the Gen6 high-voltage batteries follows the “cell-to-pack” and “pack-to-open-body” principles. “Cell-to-pack” involves positioning the cylindrical cells – manufactured by the suppliers according to BMW Group specifications – directly in the housing of the high-voltage battery, without the intermediate step of a module being produced. “Pack-to-open-body” refers to the high-voltage battery’s new role as a structural component in the vehicle architecture. Numerous innovations patented by the BMW Group can be found here.

Know-how from Bavaria and Austria – in demand around the world

Before series production of the high-voltage batteries gets underway worldwide, the production processes will be developed and pre-series batteries subjected to thorough testing. This will happen at the BMW Group pilot plants for high-voltage batteries in Parsdorf, Hallbergmoos and Munich. The new series production plants around the world will then be ready. The product and process expertise is centred in Bavaria. Production of the Energy Master will take place at Plant Landshut, which will then supply all the high-voltage battery assembly plants around the world. There, the highly intelligent control unit will be installed on the high-voltage battery. The electric motor with sixth-generation BMW eDrive technology is produced at Plant Steyr in Austria, which is also home to a development centre for electric drive systems and thermal management.

Production of the Energy Master at BMW Group Plant Landshut  

A state-of-the-art production system for the BMW Energy Master is taking shape at Plant Landshut. The plant is currently producing the highly complex control unit in pre-series. Series production on the first production line will begin in August 2025, with a further expansion stage to follow in mid-2026. This is the first time the development and production of this central control unit has taken place in-house at the BMW Group. “As the company’s largest in-house component manufacturer, Landshut plays an important role for the Neue Klasse,” says Dr Joachim Post. “The plant is an innovation hub and a driver of transformation.” Around 200 people will be employed in the Energy Master production area at Landshut when production begins, rising to as many as 700 people as it ramps up further. The BMW Group has channelled investment in the high hundreds of millions of euros into the expansion of electric mobility at Plant Landshut since 2020, strengthening both the production facility itself and Germany’s status as an industrial powerhouse for the long term. The modular manufacturing system used to produce the Energy Master was also designed fully in-house by the BMW Group. It is supplied with subcomponents by a supply chain set up by the BMW Group. This extends to the n-tier supply chain for supply-critical components such as semiconductors. The benefits of this set-up can be seen in terms of both costs and supply security. The scalable production system enables the company to respond quickly and flexibly to market requirements. The high degree of automation, involving up to 400 robots in the final expansion stage, maximises efficiency. Comprehensive in-process monitoring, which includes the use of AI-based camera systems, and 100-per-cent end-of-line system checks in a clean-room environment ensure optimum quality.

Different recycling processes within the value chain

As electric mobility ramps up, there is an increasing focus on recycling of high-voltage batteries at the end of their lifecycle. Under a long-term partnership with SK tes – a leading provider of innovative technology lifecycle solutions – cobalt, nickel and lithium from end-of-life batteries are recovered from the BMW Group and integrated into the supply chain for the manufacture of new batteries. This closed-loop approach increases the efficiency and resilience of the BMW Group as part of a circular economy. The BMW Group will follow a similar path in the USA, Mexico and Canada up to 2026 with a separate partnership.

Innovative direct recycling at the BMW Group

The BMW Group is also exploring other recycling options in the value creation process. One example of this is the direct recycling method developed in-house. The BMW Group is working with its joint venture Encory to set up a competence centre for battery cell recycling in Lower Bavaria, where the company will put its direct recycling ideas into practice. This innovative process will enable residual materials from battery cell production and whole battery cells to be mechanically broken down into their valuable constituent components. The raw materials obtained in this way will be re-used directly in the pilot production process for battery cells at the company’s competence centres.

Technology-open approach for electric mobility: the new e-drive system of Gen6

The BMW Group has retained the principle of an electrically excited synchronous motor (EESM) for its Gen6 power unit. On this type of synchronous motor, the magnetic field in the rotor is generated by windings fed with direct current rather than permanent magnets. In this way, the strength of the rotor’s magnetic field can be optimally adjusted to the prevailing load conditions. This results in both excellent levels of efficiency at customer-relevant operating points and constant power output at high rotational speeds. As with the Gen5 version, the synchronous motor will be positioned above the rear axle and feature a compact housing incorporating the electric drive unit, power electronics and transmission. Many of the motor’s technical details were created with the help of patented expertise, with the non-potted rotor alone accounting for more than ten patent applications.

Neue Klasse additionally incorporates ASM technology

The Gen6 powertrain employs a second, additional electric motor technology in the form of the asynchronous motor (ASM). Here, instead of being generated by permanent magnets (PSM) or electrical excitation (EESM), the rotor’s magnetic field is induced by the stator. On this type of motor, the rotor takes the form of a metal cage. The asynchronous motor offers the advantage of a more compact design and superior cost efficiency. The ASM motor variants will be fitted at the front axle of Neue Klasse cars with BMW xDrive.

Extensive improvements to EESM technology

Besides the addition of ASM technology, the EESM technology has also undergone a major upgrade for Gen6: rotor, stator and inverter have all been fully designed for the new 800V architecture of the Gen6 tech in order to maximise drive system performance and efficiency. This has been further helped by a complete redesign of the oil and water cooling systems. In addition to this, the experts from the BMW Group have also succeeded in improving the electric motor and central housing in terms of their weight and rigidity too. The transmission still uses a two-stage helical design, but has been further optimised by enhancements to its geometry and cooling, lower friction levels and more pleasant acoustics. The electrically excited synchronous motor’s “brain”, the inverter, now features 800V technology along with silicon carbide (SiC) semiconductors to boost efficiency. The inverter is completely integrated into the electric motor’s housing. Its task is to convert the DC power supply from the high-voltage battery to AC for use in the electric motor. The inverter was developed in-house by the BMW Group and is produced at Plant Steyr in Austria.

Lower weight, costs and energy losses – greater efficiency in the vehicle

The results obtained from intelligently incorporating new technologies into the electric powertrain while consistently enhancing existing systems make impressive reading. When compared to a Gen5 xDrive model, a future Neue Klasse model complete with EESM and ASM technology boasts the following improvements: energy losses have been reduced by 40%, costs by 20% and weight by 10%. By combining different types of electric motor, the BMW Group’s technology-open approach is therefore clearly in evidence within the field of electric mobility. In future, customers will be able to choose from models equipped with one, two, three or four electric motors to suit their individual preferences and requirements. The sixth generation BMW eDrive technology is a significant factor in the gain in overall vehicle efficiency of around 20 per cent for the Neue Klasse. This figure is based on a comparison with the current generation of all-electric vehicles from the BMW Group.

Modular concept provides crucial advantage for manufacturing electric motors

The manufacturing concept for the Gen6 electric drive system uses the principle of modular building blocks. This forms the basis for highly flexible manufacturing of various electric drive variants across the entire Neue Klasse model range. The modular "building block” concept leads to positive economies of scale and cost savings in development and production. It also has the effect of improving the scalability of production volumes. The modular approach ensures a high degree of flexibility in production, the supply networks and procurement.

The Gen6 electric drive systems: made in Steyr

Series production of the Gen6 electric drive systems will commence at BMW Group Plant Steyr in summer 2025. Pre-production already got underway at the Austrian facility in September 2024. The pre-production motors are undergoing rigorous testing and some are already being fitted in Neue Klasse test vehicles from Plant Debrecen. By 2030, the BMW Group will have invested over one billion euros at the site since the project’s launch in 2022 to expand its development and production expertise for electric drive systems. Thanks to the increase in capacity, the plant will retain its status as the BMW Group’s leading facility for drive systems. The plant has been developing and building combustion engines for the BMW and MINI brands for over 40 years. Plant Steyr’s many years of experience and high level of expertise in the field of drive systems make it the ideal site for manufacturing the Gen6 electric motors. It has an annual production capacity of 600,000 electric drive units. Diesel and petrol engines continue to be manufactured there alongside the electric motors. By 2030, around half of the on-site employees should be working in electric mobility – a vital step for safeguarding the more than 4,700 jobs at the plant in the long term. In future, all key components of the innovative, highly integrated electric drive unit – i.e. the rotor, stator, transmission, inverter and housing – will be produced at Steyr. This will include manufacturing the inverters in an in-house clean room environment for the first time, thereby taking the engine plant into the realm of electrical engineering. The electric drive components will be built on two new assembly lines at Steyr.

Thermal management: complex interaction, crucial for performance
Thermal management involves highly complex interaction between various systems in an electric vehicle and is of critical importance for a host of performance parameters, including range, real-world consumption, acceleration and charging time. Thermal management is a question of constantly keeping the temperature of the electric motor, power electronics and high-voltage battery in the optimum range, while maintaining standards of passenger comfort at the same time. Efficient thermal management is important for fast charging too. Here, the battery temperature must be kept within a defined window in order to make optimum use of the available charging capacity. Unlike combustion engines, electric motors give off little heat. This means that, depending on the operating state, the battery and the passenger cell have to be not only cooled, but heated too. The Steyr site develops the thermal management systems for all electric vehicles from the BMW Group. The plant’s development centre is also responsible for the brain at the heart of the electric motor – the inverter.

BMW Group Plant Landshut – a multi-talented component manufacturer

BMW Group Plant Landshut is the BMW Group’s largest component plant anywhere in the world, supplying components to all the company’s vehicle and drive system plants. Its workforce of around 3,700 employees produces a broad spectrum of cutting-edge components for vehicles from the BMW Group. Working closely with the BMW Group’s Research and Innovation Centre (FIZ) in Munich, Plant Landshut plays a pivotal role as a hub of innovation for the automotive industry. It develops pioneering technologies and manufacturing processes that serve to maintain the company’s competitive edge. Over the course of the Neue Klasse project, the site is investing some €200 million in its light metal foundry to increase annual production capacity for the electric motor housings. The Injector Casting (ICA) process developed and patented in Landshut is a prime example of the plant’s innovative strength. This globally unique process is used to manufacture the electric motors’ highly complex aluminium housings that set new standards for lightweight design and functional integration.

In the event of enquiries please contact:

Corporate Communications

Christian Marxt

Spokesperson Production Network, Powertrain and High-voltage Batteries

Mobile: +49-151-601-79158

E-mail: Christian.Marxt@bmwgroup.com

Carolin Seidel

Spokesperson BMW Group Plant Landshut

Mobile: +49-151-601-90340

E-mail: Carolin.Seidel@bmwgroup.com

Florian Moser

Team Lead Purchasing and Supplier Network, Spokesperson Dr Joachim Post

Mobile: +49-151-601-62847

E-mail: Florian.Moser@bmwgroup.com

Bernhard Ederer

Spokesperson Drive Technology, Battery, Charging, Efficient Dynamics

Mobile: +49-176-601-28556

E-mail: Bernhard.Ederer@bmwgroup.com

Diana Schaidnagel

Spokesperson Sustainability

Mobile: +49-151-601-38407

E-mail: Diana.Schaidnagel@bmw.de

The BMW Group

With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial services. The BMW Group production network comprises over 30 production sites worldwide; the company has a global sales network in more than 140 countries.

In 2024, the BMW Group sold 2.45 million passenger vehicles and more than 210,000 motorcycles worldwide. The profit before tax in the financial year 2023 was € 17.1 billion on revenues amounting to € 155.5 billion. As of 31 December 2023, the BMW Group had a workforce of 154,950 employees.

The economic success of the BMW Group has always been based on long-term thinking and responsible action. Sustainability is a key element of the BMW Group’s corporate strategy and covers all products from the supply chain and production to the end of their useful life.

Dodatne informacije so na voljo spodaj in v priponki v angleščini. 

Munich. BMW Group and Pirelli have worked together to unveil new 20-inch P Zero Winter 2 tires for the BMW 7 Series which focus on range capabilities, thanks to its “A class” European labelling for rolling resistance. This collaborative effort sets a new benchmark especially for all-electric vehicle tires, offering drivers an exceptional driving experience with extended range, uncompromised comfort, and outstanding performance in winter conditions on different surfaces.

All tires at BMW are developed specifically for BMW models in accordance with the highest quality and technology standards and therefore get the BMW specific Star-Mark as a seal of approval. This ensures that tires on BMW models meet the stringent requirements set by BMW, guaranteeing optimal performance and safety. This is in line with Pirelli’s Perfect Fit strategy, which aims to develop specific tires for the cars to be equipped with.

Compared to summer tires, winter tires impact the car’s range due to a higher rolling resistance because of their compounds and tread pattern designed to offer grip on snowy and wet cold asphalt. The rolling resistance of a tire describes the force required for rolling motion, directly influencing the range of a vehicle. The new 20-inch development in collaboration with Pirelli compensates for these disadvantages resulting in an extended range of up to 50km for the all-electric BMW i7 in comparison to a standard winter tire. The technological advancements in the Pirelli P Zero Winter 2 can be attributed to significant breakthroughs, particularly in the areas of tread pattern and tread compound.

"This collaboration between BMW and Pirelli represents a significant milestone in tire technology regarding range capabilities for winter tires" said Dr. Mihiar Ayoubi, Senior Vice President Development Driving Pleasure at the BMW Group. "We are proud to partner with Pirelli to offer our customers an exceptional driving experience that combines the known high level of snow and wet performance with a significant positive impact for our all-electric vehicles during winter times. These tires exemplify our commitment to pushing the boundaries of our cars in every dimension."

This new development from the BMW Group and Pirelli aligned with their sustainability goals by using renewable materials wherever technically appropriate and reducing the CO2 footprint of their plants. This partnership showcases BMW and Pirelli's shared vision for environmentally conscious mobility and their dedication to further push the limits of tire technology. The tire will be available for the BMW 7 Series starting from August 2024. The goal is to roll out this new technology to other future BMW models, starting next with the new BMW X3 in the second half of 2024.


If you have any questions, please contact:

Corporate Communications

Dieter Falkensteiner,
Spokesperson Driving Dynamics
Telephone: +49-15160151813
E-Mail: Dieter.Falkensteiner@bmw.de

Liane Drews,
Head of Product Communications BMW Luxury and Upper Midsize Class
Spokesperson BMW 5 Series, BMW 6 Series, BMW 7 Series
Telephone: +49-170-2272147
E-Mail: Liane.Drews@bmw.de

Almut Stollberg,
Head of Communication Innovation, Design, Technology, Digital Car / Communication E
Telephone: +49-151-601-96543
E-Mail: Almut.Stollberg@bmwgroup.de

Internet: https://newsroom.bmwgroup.com/global/en
E-Mail: presse@bmw.de

The BMW Group

With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial and mobility services. The BMW Group production network comprises over 30 production sites worldwide; the company has a global sales network in more than 140 countries.

In 2023, the BMW Group sold over 2.55 million passenger vehicles and more than 209,000 motorcycles worldwide. The profit before tax in the financial year 2023 was € 17.1 billion on revenues amounting to € 155.5 billion. As of 31 December 2023, the BMW Group had a workforce of 154,950 employees.

The success of the BMW Group has always been based on long-term thinking and responsible action. The company set the course for the future at an early stage and consistently makes sustainability and efficient resource management central to its strategic direction, from the supply chain through production to the end of the use phase of all products.

www.bmwgroup.com
Facebook: http://www.facebook.com/BMWGroup 
Twitter: http://twitter.com/BMWGroup
YouTube: http://www.youtube.com/BMWGroupView
Instagram: https://www.instagram.com/bmwgroup
LinkedIn: https://www.linkedin.com/company/bmw-group/

• Popolna električna mobilnost praznuje premiero v modelu BMW X – sploh prvem BMW iX3 (kombinirana poraba goriva: 0,0 l/100 km (WLTP); kombinirana poraba električne energije: 18,6-19 kWh/100 km (WLTP); kombinirane emisije CO2: 0 g/km (WLTP); kombiniran električni doseg 450−459 km (WLTP)). Užitek v vožnji brez lokalnih emisij dopolnjuje športno zmogljivost, po kateri slovi BMW, pa tudi udobje, vsestransko funkcionalnost in prostornost zelo uspešnega BMW X3. Zadnja faza uvedbe strategije elektrifikacije BMW Group, ki je v teku; tehnološko strokovno znanje, pridobljeno v razvoju avtomobilov BMW i, je prvič uporabljeno v popolnoma električno gnanem modelu jedrne blagovne znamke BMW.
  
  
• Novi BMW iX3 je prvi model blagovne znamke, ki ga bodo v proizvodnem obratu Shenyang v provinci Liaoning na Kitajskem izdelovali tudi za izvoz. Svoj vstop na trg bo začel na Kitajskem konec leta leta 2020. V Sloveniji bo na voljo od konca januarja 2021.
  
  
• Strateški pristop "Power of Choice/moč izbire" zajema širok spekter zahtev strank in zakonskih predpisov po vsem svetu: BMW X3 je prvi model, ki bo na voljo z bencinskim ali dizelskim motorjem in priključnim hibridnim ali popolnoma električnim pogonskim sistemom.
  
  
• Novi BMW iX3 utira pot tehnologiji BMW eDrive pete generacije. Znaten napredek je bil dosežen v smislu gostote moči, dosega delovanja, mase, prostorske zahteve namestitve in prilagodljivosti. Gostota moči električnega pogonskega sistema se je povečala za 30 odstotkov v primerjavi z obstoječimi popolnoma električnimi vozili BMW Group; gravimetrična energijska gostota (shranjena energija na gram baterije) visokonapetostne baterije na ravni celic se je izboljšala za 20 odstotkov. Najnovejše različice elektromotorja, močnostne elektronike, tehnologije polnjenja in visokonapetostne baterije (vsi sestavni deli so rezultat internega razvoja) bodo od leta 2021 vgrajene tudi v modelih BMW iNEXT in BMW i4.
  
  
• Zaradi visoko integrirane tehnologije pogonskega sistema se je učinkovitost bistveno izboljšala v primerjavi z BMW i3. Elektromotor, močnostna elektronika in menjalnik so prvič razporejeni v sredinsko nameščenem aluminijastem ohišju. Visokonapetostna baterija BMW eDrive pete generacije z najnovejšo tehnologijo baterijskih celic in bruto energijsko vsebnostjo 80 kWh omogoča doseg delovanja do 460 kilometrov v skladu s predpisanim novim preskusnim postopkom WLTP. BMW Group stalno spremlja upoštevanje skladnosti z okoljskimi in socialnimi standardi v postopku oddaje javnih naročil za litij in kobalt, ki se uporabljata v baterijskih celicah.
  
  
• Na novo zasnovan elektromotor BMW eDrive pete generacije proizvede največjo moč 210 kW/286 KM in 400 Nm največjega navora. Od 0 do 100 km/h pospeši v 6,8 sekunde (za primerjavo ima BMW X3 30i: 6,4 sekunde), njegova največja hitrost (elektronsko omejena) pa je 180 km/h. Princip zasnove sinhronskega motorja z vzbujalnim tokom zagotavlja optimiziran razvoj moči, inženirjem pa omogoča, da se izognejo uporabi redkozemeljskih elementov.
  
  
• Obseg uporabe različnih stopenj rekuperacije omogoča izbiro med zelo očitnim občutkom vožnje z enim pedalom (one-pedal feeling) z obsežno rekuperacijo energije v potisnem pogonu in med zaviranjem v položaju izbirne ročice B ter prilagodljivo rekuperacijo, vključno s funkcijo jadranja v položaju vožnje D. Stopnjo rekuperacije je mogoče prilagajati v treh fazah. Prilagodljiva rekuperacija izboljšuje udobje vožnje in učinkovitost s prilagajanjem regeneracije zavorne energije in funkcije jadranja neposrednim voznim razmeram.
  
  
• Prenos moči na zadnji kolesi prinaša klasično vozno izkušnjo BMW. Edinstvena kombinacija nizke porabe električne energije in visoke zmogljivosti polnjenja omogoča potovanja na dolge razdalje pri velikih povprečnih hitrostih. Prilagodljivo podvozje (standardna oprema) optimizira športno odzivnost in udobje.
  
  
• BMW IconicSounds Electric. Na novo razvita zvokovna sled električno gnanih modelov BMW doživlja svoj prvenec v BMW iX3 in dodaja novo čustveno globino vozni izkušnji. Zmogljiv zvok pogona je na voljo v avtomobilih z izvedbo opreme "Impressive". Nezamenljiva kompozicija ob zagonu in deaktiviranju električnega pogonskega sistema, razvita v sodelovanju s Hansom Zimmerjem.
  
  
• Izdelki in storitve za polnjenje po meri: kartica BMW Charging omogoča preprost in udoben dostop do trenutno več kot 450.000 javnih polnilnih postaj po vsem svetu; novi prilagodljivi hitri polnilnik, ki omogoča uporabo različnih tipov vtičnic, in zasebne stenske polnilne postaje (BMW Wallbox) visoke zmogljivosti so na voljo kot dodatna oprema. Individualne paketne ponudbe zagotavljajo optimalno rešitev polnjenja za vse potrebe strank.
  
  
• Nove digitalne storitve iz BMW Connected Charging* v avtomobilu in prek aplikacije spodbujajo uporabniku prijazno električno mobilnost in izboljšajo načrtovanje navigacije, vključno s priporočili za postanke, da lahko uporabniki napolnijo baterije svojih avtomobilov. Navigacijski sistem med potovanjem samodejno vključi premore za polnjenje visokonapetostne baterije (vključuje podrobne informacije o posameznih polnilnih postajah) v načrtovanje poti in izračun časov prihoda.
  
  
• Optimiziran koncept shranjevanja energije zdaj vozilu omogoča najv. moč polnjenja do 150 kW na hitrih polnilnih postajah DC; ponovno polnjenje od 0 do 80 odstotkov zmogljivosti visokonapetostne baterije traja le 34 minut, nadaljnje 10-minutno polnjenje pa prinaša 100 kilometrov dodatnega dosega (po WLTP). Stranke BMW iX3 uživajo posebej ugodne tarife odjema električne energije na hitrih polnilnih postajah IONITY s postavkami, odvisnimi od porabe (npr. 0,29 EUR za kWh v Nemčiji).
  
  
• Značilna sorazmerja modela BMW X se združijo s posebnimi oblikovnimi značilnostmi vozila z električnim pogonom. Inovativna aerodinamična platišča BMW: 19-palčna aluminijasta platišča nove oblike za zmanjšanje zračnega upora so del standardne opreme.
  
  
• Premijski ambient v notranjosti s posebnimi poudarki modela. Uporabniku prijazen potniški prostor s spremenljivimi možnostmi uporabe in visoko stopnjo udobja za pet oseb je odlična rešitev za vsakodnevne vožnje in daljše razdalje; prostornino za nakladanje je s 510 litrov mogoče razširiti na kar 1.560 litrov.
  
  

• Daljnosežna standardna specifikacija (oprema "Inspiring") vključuje kovinsko barvo zunanjosti, LED-žaromete, avtomatsko klimatsko napravo s tripodročnim upravljanjem ter funkcijama predgrevanja in predkondicioniranja, avtomatsko delovanje vrat prtljažnika, panoramsko stekleno streho, Driving Assistant Professional in ambientalno razsvetljavo. Opcijska izvedba opreme "Impressive" prinaša tudi 20-palčna aluminijasta platišča, akustično zasteklitev, športne sedeže, oblazinjenje iz usnja Vernasca, projektor BMW Head-Up, parkirnega asistenta Plus in sistem za prostorski zvok Harman Kardon.

• BMW Live Cockpit Professional z BMW Maps, navigacijskim sistemom v oblaku, in BMW Intelligent Personal Assistant sta na voljo standardno. Integracija pametnih telefonov s predpripravo Apple CarPlay in Android Auto*, Remote Software Upgrade in digitalne storitve iz BMW Connected Charging* so prav tako del standardne ponudbe.
  
  
• Izjemne okoljske poverilnice zahvaljujoč zavezanosti trajnosti v celotni vrednostni verigi. Vpliv emisij CO2 BMW iX3 v njegovem celotnem življenjskem ciklu je bistveno manjši kot pri BMW X3 xDrive20d; pri uporabi električne energije za polnjenje iz energetske mešanice v EU je vpliv zmanjšan za 30 odstotkov, pri izključni uporabi mešanice obnovljivih virov energije pa je vpliv zmanjšan za približno 60 odstotkov.

^{*Storitev ni na voljo na slovenskem trgu.}

Munich. The BMW iX3, the production of which will commence in 2020, facilitates locally emission-free driving in a novel and efficient form, whilst also being suitable for everyday use. A range of more than 440 km* within the legislative WLTP test cycle will be achieved with a net-battery size of 74 kWh*. The first purely electric Sports Activity Vehicle (SAV) is the trailblazer for BMW eDrive technology of the fifth generation, which, starting 2021, will also be deployed in the BMW i4 and the BMW iNEXT. For this purpose, both the drive system and the high-voltage battery unit featuring pioneering battery cell technology have been completely redeveloped. In the BMW iX3, the related advancement ensures brand-typical driving experience combined with outstanding efficiency and a novel balance of weight and range.

The BMW iX3 is yet a further milestone in the consistent realisation of the BMW Group’s electrification strategy. In 2020 the BMW X3 will become the brand’s first model available both with conventional petrol and diesel engines as well as plug-in hybrid and purely electric drive. With this “power of choice” offer, the globally operating company is taking into account the various different requirements and needs of their worldwide customers worldwide as well as maximum effectiveness in the reduction of CO2 emissions. The BMW iX3 is produced for the world market by the joint venture BMW Brilliance Automotive in Shenyang, China.  

* = preliminary data

________________________.

The fifth-generation BMW eDrive technology is the key to future-oriented sustainability for vehicles with electrified drive systems. It is the result of consistent development work within the framework of BMW EfficientDynamics and the experience gained by the BMW Group in the field of electric mobility spanning more than 10 years. All powertrain components used for BMW eDrive technology were developed solely by the BMW Group. Moreover, the electric motor and the high-voltage batteries are produced in corporately owned manufacturing facilities. In this way, the BMW Group ensures it has a decisive influence on the product properties and the quality of each component. Furthermore, the drive unit and the high-voltage battery unit are flexibly scalable in terms of power and energy content and can thus be used in various different vehicle concepts and segments.

EfficientDynamics at its best: New drive component with high efficiency and brand-typical power characteristics.  
In the BMW iX3, EfficientDynamics reaches a new level. The vehicle’s fifth-generation BMW eDrive technology comprises a drive unit in which electric motor, system electronics and transmission are brought together into a central housing. As a result, the required installation space of the drive technology and its weight are considerably reduced. The ratio between motor output and weight of the drive system improves around 30 percent compared to the previous generation.
The electric motor featured in the BMW iX3 delivers a maximum power output of 210 kW/286 hp*. The torque of 400 Nm* allows for high initial acceleration and keeps a high level even at the upper motor speeds because of exclusive BMW design measures.

A further special feature of the electric motor being deployed in the BMW iX3 for the first time is a construction method that eliminates the need for rare earth materials.

The electric motor used in the BMW iX3 transfers power to the rear wheels. This effectuates a further increase in drive system efficiency. Moreover, the range of the BMW iX3 benefits from the drive design conveying the traditional BMW rear-wheel drive experience.

High-voltage batteries with significant higher energy density and responsible use of raw materials.

The high-voltage battery unit of the BMW iX3 is integral part of BMW’s fifth eDrive generation and is based on the latest evolution in NMC-811 technology in BMW typical prismatic design. The BMW Group has outstanding development capabilities in this field. This know-how flows into precise specifications with regard to the use of materials and battery design, according to which the battery cells are produced. Consistent research and development work not only raises energy density but also constantly improves all battery cell characteristics, in particular also durability and safety. In total, the BMW high-voltage battery shows the optimum of what is possible nowadays.
At the same time the BMW engineers were able to reduce the share of cobalt contained in the battery by another two thirds. Compared to former technology used by BMW Group, the gravimetric energy density on cell level in the BMW iX3 is around 20 percent higher.

With the BMW iX3 the raw materials Cobalt and Lithium for the first time are purchased by BMW directly and then handed over to the producer of the battery cells.

In addition, scalability and the compact design of the high-voltage battery unit have been further optimised. The battery cells are grouped into modules at specialised BMW production locations and finally assembled as high-voltage battery packs aligned to each model. The high-voltage battery unit in the BMW iX3 is installed in an extremely flat position in the vehicle floor. Thanks to this arrangement, there is no loss of space for passengers and the luggage compartment compared to the conventionally powered versions of the BMW X3.

Greater range thanks to high efficiency rather than a bigger battery

With a net energy content of 74 kWh*, the high-voltage battery unit installed in the BMW iX3 achieves a range of more than 440 km* in the legislative WLTP test cycle. Within its segment, the BMW iX3 boasts not only a unique low power consumption of less than 20 kWh/100km* accordingly to the WLTP test cycle, but also stands for a novel ratio between battery size and range.
Thanks to the favourable efficiency rating of the drive components and the high energy density of the high-voltage battery unit, the BMW iX3 achieves a range that is only possible for common electric vehicles with larger and thus heavier batteries.

Positive environmental impact secured.
The “real” ecological footprint of electric vehicles is sometimes questioned, particularly in markets still having a low percentage of green electricity in the public power grid. At the BMW Group every electrified model has to proof that for the entire cycle, comprising raw material procurement, supply chain, production and usage phase as well as recycling, its CO2 balance is substantially better than the one of a conventionally powered sibling.  For the BMW iX3 the related advantage is more than 30 percent compared to a BMW X3 sDrive 20d when average European power supply is used during the car’s usage phase. If the vehicle is charged with green electricity the advantage is around 60 percent.

Furthermore, in analogy with the BMW i3 Plug&Play technology, the high-voltage battery featured in the BMW iX3 is planned for a second life as a stationary battery pack for the period following the first long life in the car. This way the already positive CO2 balance of the BMW iX3 can be further improved.

* =  preliminary data

Munich. The heart of the BMW brand beats in the premium segment of the mid-range category. Along with the BMW 4 Series Coupé, BMW 4 Series Convertible and BMW 4 Series Gran Coupé models, it is the BMW 3 Series that brings out the qualities that are key to hallmark brand driving pleasure in a particularly concentrated form. Now BMW is transferring the brand's characteristic core features to the age of electric mobility – the central purpose in developing the BMW i4. The BMW Group's first purely electrically powered model for the premium mid-range combines driving dynamics, sporty and elegant design, premium quality and the spacious comfort and functionality of a four-door Gran Coupé with locally emissions-free mobility. This heralds a new era of driving pleasure.

The future of electric mobility will be shaped by fifth-generation BMW eDrive technology, for which the BMW iX3 – to be produced from 2020 onwards – will act as a pioneer, followed by the BMW iNEXT and the BMW i4. With fifth-generation BMW eDrive technology, which also includes the latest innovations in the field of battery cells, the BMW i4 sets new standards in sporty performance, achieving a range of some 600 kilometres.

The development of the BMW i4 is part of a comprehensive product offensive by the BMW Group in the field of models with electrified drive. The company currently has the biggest range of all-electric and plug-in hybrid models within the competitive field. By 2023, the BMW Group will have 25 models with electrified drive in its program. With a model portfolio that includes efficient combustion engines as well as modern plug-in hybrid and purely electric drive, the BMW Group as a globally operating company is taking into account the varying requirements and preferences of its customers in different regions of the world. Irrespective of the type of drive selected, all current and future models feature hallmark brand driving pleasure as part of their specific characteristics.

Fifth-generation BMW eDrive technology for optimised dynamics, efficiency and range.

The drive technology of the BMW i4 sets new standards in terms of power density, efficiency and range in locally emissions-free driving. The electric motor, power electronics, charging unit and high-voltage battery have been entirely newly developed. Together they form the BMW eDrive technology of the fifth generation, with which the BMW Group has made further significant advancements in the field of electrified drive. From 2020 onwards, fifth-generation BMW eDrive technology will be introduced first in the BMW iX3 and then in the BMW iNEXT and BMW i4. The electric motor developed for the BMW i4 delivers a maximum output of around 390 kW/530 hp, reaching the level of a V8 engine in current BMW models fitted with a combustion engine. Its spontaneous power delivery gives the BMW i4 outstanding performance characteristics and exceptionally high efficiency.

The fifth generation of BMW eDrive also includes a newly designed high-voltage battery featuring the latest battery cell technology. The design of the high-voltage battery developed for the BMW i4 is characterised by its extremely flat design and optimised energy density. With a weight of some 550 kilograms, it has an energy content of around 80 kWh. This gives the BMW i4 a range of approximately 600 kilometres.

Gran Coupé with characteristic design and performance features.

The all-electric BMW i4 will be produced from 2021 onwards and subsequently launched on the global automotive markets. The new model will be manufactured at the company's main plant in Munich, where other vehicles produced include the BMW 3 Series Sedan with conventional combustion engine and plug-in hybrid drive, the BMW 3 Series Touring with conventional drive and from summer 2020 also with plug-in hybrid drive, the BMW 4 Series Coupé and the BMW M4 Coupé (fuel consumption combined: 10.0 – 9.3 l/100 km; combined CO₂ emissions: 227 – 213 g/km). In addition to the sporty, elegant design that is typical of a 4-door coupé of the brand, the BMW i4 is characterised by impressive performance features. The BMW i brand's first Gran Coupé accelerates from zero to 100 km/h in around 4.0 seconds, achieving a top speed of more than 200 km/h.

A flexible vehicle architecture, the flat, low-positioned high-voltage battery and the compact drive technology create a high degree of freedom in realising a model-specific design. The BMW i4 combines the characteristic proportions of a 4-door coupé with the typical design features of a BMW i model. Dynamically stretched lines and a precise surface design go hand in hand with aerodynamically optimised exterior features as well as sustainability accentuations that are specific to BMW i. High entry and exit comfort for the rear passengers and a spacious, variable interior ensure high suitability for both day-to-day trips and long-distance travel. As such, the BMW i4 can be clearly identified as a BMW Gran Coupé – and equally clearly as an electrically powered vehicle.

Modular, flexible drive and battery storage technology.

The electric drive component of the BMW i4, its charging unit and high-voltage battery are all developed in-house by the BMW Group. Production is carried out in-house or according to BMW Group specifications. Here, the experience gained from development of the previous generations of BMW eDrive technology is consistently tapped into with the aim of optimising all components on an ongoing basis.

The BMW Group's comprehensive expertise in the field of electrified drive systems forms the basis for a scalable modular system whose components can be integrated into different vehicle concepts with great flexibility. Fifth-generation BMW eDrive technology comprises a highly integrated drive system in which the electric motor, transmission and power electronics are accommodated in a single housing. This drive system is compatible with all vehicle concepts and will be available for different models in a range of output levels. The highly integrated design of the system allows a significant increase in power density as well as a reduction in weight and manufacturing effort. Production of future-generation electric motors will no longer require materials categorised as rare earths.

The next generation charging unit is characterised by a uniform package suitable for all future vehicle architectures. It can be used in plug-in hybrid models as well as in purely electrically powered vehicles and is designed for a charging capacity of up to 150 kW. This allows the high-voltage battery of the BMW i4 to be charged to around 80 per cent of its full energy content in around 35 minutes. This results in a charging time of around six minutes for a range of 100 kilometres.

In the field of high-voltage batteries, too, the advancements introduced with the fifth generation of BMW eDrive technology are based on the BMW Group's in-depth expertise and years of experience. The company has an exceptionally high level of know-how both in the field of battery cell technology and in the manufacture of model-specific high-voltage batteries. This lays the foundation for continuous optimisation of the batteries – both in future plug-in hybrid models and in purely electrically powered vehicles. The BMW Group has been manufacturing modules and model-specific high-voltage batteries for vehicles with electrified drive systems since 2013. An independently developed modular system with a flexible arrangement of the modules enables integration of batteries developed in-house into various vehicle concepts. Consistent ongoing development work is dedicated to optimising the basic characteristics of the battery cells as well as the structure of the modules and their arrangement in the respective model-specific storage unit. For example, the batteries used in the BMW i4 and other future electric vehicles have a higher number of cells per module, a reduced number of components, a more compact design and increased flexibility with regard to their geometry.

With the establishment of the Battery Cell Competence Centre in Munich, the BMW Group has further expanded its research and development expertise in this area, which is crucial to the future of electromobility. The focus is on fundamental research in areas where there is an impact on customer-related factors such as energy density, accessible peak output, service life, safety, charging characteristics, response at different temperatures and manufacturing costs. At the new Battery Cell Competence Centre, research is being conducted in particular into the potential for further optimisation of cell chemistry and cell design. The selection and composition of materials for the anode, cathode, electrolyte and separator as well as the format of the battery cells made of these materials will have a key impact on the quality of high-voltage batteries used in future models with electrified propulsion.

V priponki se nahajajo dodatne fotografije in presskit  iz mednarodne predstavitve za medije novega BMW 330e v Garching/München 25 - 29. januar 201

München / Stuttgart. BMW Group je z dosego dveh novih zmag podaljšal svojo zmagovito pot na mednarodni prireditvi za izbor motor leta. Zasluge za najnovejši odlikovanji na priznanem svetovnem tekmovanju imata pogonski enoti, ki v aktualne BMW in MINI z izjemno učinkovitim stilom prinašata karakteristike športne zmogljivosti. Lanski uspeh je v svojem razredu ponovil 2,0-litrski štirivaljni motor s tehnologijo BMW TwinPower Turbo, vgrajen v model BMW serije 1, BMW serije 3 in BMW serije 5. 1,6-litrski štirivaljni motor MINI TwinPower Turbo iz MINI Cooper S pa je še uspešnejši s tremi zaporednimi zmagami v svojem razredu. Nagrade za motor leta so bile podeljene 5. junija, 2013 na sejmu Engine Expo v Stuttgartu.

Bliskovit razvoj moči in stopnja učinkovitosti, ki ji v konkurenci ni para, sta temelja uspeha BMW Group na prireditvi za najboljši motor leta. Zmagovalce v posameznih kategorijah in v celotni konkurenci določa mednarodna žirija 84 avtomobilističnih novinarjev iz 35 držav. Uspeh podjetja v dveh kategorijah na izboru za motor leta je nadaljnji dokaz svetovno priznanega razvojnega znanja na področju sistema pogonske tehnologije. Od leta 1999 je BMW Group v svojo trofejno sobo postavil preko 60 različnih priznanj.

Tehnologija BMW TwinPower Turbo je bila zopet ključna za uspeh v razredu delovnih prostornin od 1,8 do 2,0 litra. V zmagovitem BMW štirivaljniku ta paket vključuje turbinski polnilnik z dvojno spiralo, sistem neposrednega vbrizgavanja goriva HPI in sistem povsem spremenljivega krmiljenja ventilov BMW Valvetronic. 180 kW/245 KM različica motorja poganja BMW 328i, BMW 528i, BMW Z4 sDrive28i, BMW X3 xDrive28i n BMW X1 xDrive28i.

Drugi zmagovalec iz serije motorjev BMW Group je prav tako prepričal žirijo – in to že tretje leto zapored – s svojim edinstvenim ravnovesjem med zmogljivostjo in varčnostjo. 1,6-litrska štirivaljna pogonska enota MINI TwinPower Turbo, ponovno dominantna v kategoriji 1,4 – 1,8-litrskih motorjev, se ponaša s turbinskim polnjenjem z dvojno spiralo s funkcijo Overboost, neposrednim vbrizgavanjem goriva in krmiljenjem ventilov na osnovi sistema Valvetronic. Največja moč motorja 135 kW/184 KM ponuja MINI Cooper S pospešek od 0 do 100 km/h v 7,0 sekunde ter beleži povprečno porabo goriva po evropskem testnem krogu 5,8 litra na 100 kilometrov. Ta izjemno učinkovita pogonska enota je sedaj na voljo tudi za MINI Cooper S Countryman in MINI Cooper S Paceman, kjer jo je možno povezati s sistemom štirikolesnega pogona ALL4.