Munich/Zagreb. The BMW Group and the Croatian University of Zagreb’s Regional Centre of Excellence for Robotic Technology (CRTA) continue to advance joint research in battery cell production. The “Insight” research project will develop and implement practical AI models to optimise battery cell production at the BMW Group. The research project covers the entire battery cell value chain: from electrode production to end-of-line testing and in-house developed direct recycling.

How the research project saves raw materials, costs and time

At the Battery Cell Competence Centre (BCCC) in Munich, the BMW Group is developing battery cells for future generations of high-voltage batteries. As part of this process, numerous test series are conducted, which by their very nature require significant time and material investment. At the same time, these tests tie up manufacturing equipment and laboratory capacity. This is where the “Insight” research project comes in: Its artificial intelligence network uses existing test data, as well as real-time data from ongoing production, to accurately predict battery cell process parameters and performance data. As a result, the duration and number of test series can be significantly reduced, while maintaining or improving quality. In this way, the newly developed AI systems reduce the material and time required in individual process steps by more than 50 percent.

Other cell production use cases

The research project’s prediction models not only reduce the number of test series but also support final approval of battery cells. Following initial charging at the end of production, the cells must be stored for a defined period at precisely specified temperatures before they can be installed in a battery housing. This phase, also referred to as the “quarantine”, requires corresponding storage capacity. However, the research project’s AI systems are able to conduct a full analysis of the battery cells in advance, potentially eliminating this process step in the future.

Research collaboration combines theory and practice

Since the project was launched in 2024, the BMW Group and the University of Zagreb have been developing joint solutions using artificial intelligence to improve battery cell production. To this end, doctoral candidates and students at the University of Zagreb are collating and structuring available production data and using it to create AI models that can identify specific patterns. These AI models then make predictions that further optimise production performance, quality and costs. “We are working on scaling the newly developed AI models from the prototype environment,” explains Christian Siedelhofer, head of Technology Development Lithium-Ion Battery Cells at the BMW Group. One option would be to enable cell manufacturers. “We are also examining to what extent these models are suitable for additional use cases within our production network.”

Win-win through knowledge sharing

The University of Zagreb contributes expertise in mechanical engineering, electrical engineering and computer science to the project. Ongoing knowledge sharing benefits both partners: The University of Zagreb provides the BMW Group with access to the latest research findings, while its doctoral candidates and students have the opportunity to apply their theoretical knowledge in practice.

Development of young talent

Another aspect of the cooperation is the development of young talent. “Our joint project gets doctoral candidates and students interested in AI and battery cells and the exciting work we do at our Battery Cell Competence Centres,” says Stefan Kerscher, head of Technology Development Battery Cells at the BMW Group. “We are delighted when young talents decide to embark on a career with our company.” The cooperation offers students intensive mentoring and the opportunity to expand their professional network across the industry, enhancing their attractiveness on the job market and opening up outstanding career opportunities. The cooperation between the BMW Group and the University of Zagreb strengthens the innovation capability and competitiveness of both partners.

Battery cell expertise along the entire value chain

The BMW Group consolidates its battery cell know-how at its Competence Centres in Munich, Parsdorf and Salching. The Battery Cell Competence Centre (BCCC) in Munich houses research and development for the battery cells of the future. The best battery concept from the BCCC will be produced under near-series conditions at the Cell Manufacturing Competence Centre (CMCC) in Parsdorf. Close cross-divisional collaboration between Development, Purchasing and Production integrates product and process in a unique way. In addition to producing sample cells, the BMW Group is also focusing its efforts on the reuse of materials. As part of this process, the company has put into service a Cell Recycling Competence Centre (CRCC) in Salching, Lower Bavaria, together with Encory GmbH, which will implement the innovative direct recycling concept. The intellectual property for the recycling method is owned by the BMW Group.

Munich. The BMW Group is adopting a new and innovative hydrogen tank technology for the BMW iX5 Hydrogen. The new arrangement and size of the tanks enables a higher range of up to 750 km (up to 385 miles)*. The new BMW Hydrogen Flat Storage system offers the added advantage of making exceptionally efficient use of the space it occupies in the vehicle and is compatible with the Gen6 high-voltage battery, meaning that no room is lost inside the cabin. Models with fuel cell technology can therefore be built on the same production line as those with other drive system types. The 700 bar high-pressure hydrogen tanks additionally benefit from the mechanical protection provided by the vehicle structure, further increasing safety.

“Our new storage concept allows us to fit the hydrogen drive system into the new X5 precisely and in a way that saves space,” says Dr Joachim Post, Member of the Board of Management of BMW AG responsible for Development. “Think of it as installation Tetris: every customer gets the drive system best suited to their needs and a true BMW X5 with no compromises. This is technology openness and the art of engineering just the way we developers love them!”

Smart storage, more range.
The new flat tank system consists of seven high-pressure tanks made of carbon-fibre reinforced composite, which are connected with one another in parallel and integrated into a robust metal frame. What makes the design special is that, instead of individual pressure vessels, there are several chambers connected to form an enclosed unit. This unit is controlled by a central main valve. In this way, the optimised storage concept enables the BMW iX5 Hydrogen to achieve a greater range. This development alone accounts for several patent applications filed by the BMW Group. The system is able to store at least seven kilograms of hydrogen in total and can be filled from empty in under five minutes. As is customary for BMW hydrogen models, refuelling is safe, clean and fast. 

Experience hallmark BMW driving pleasure, refuel faster, drive further.
The BMW Hydrogen Flat Storage technology forms part of the powertrain. It combines with the fuel cell system and an innovative high-voltage battery to deliver the driving pleasure for which BMW is renowned. Here, the new BMW iX5 Hydrogen also benefits from the new Heart of Joy drivetrain and chassis control software, as well as BMW Dynamic Performance Control. It is also equipped with latest-generation Gen3 fuel cell technology, which is more efficient and powerful than any preceding generation. 

Flexible production to meet customer requirements. 
Thanks to the smart and highly flexible architecture of the new BMW X5, five different drive system variants of the model can be built to suit customer requirements: from battery-electric systems and plug-in hybrids through highly efficient conventional drive systems to hydrogen fuel cell technology.
Synergies in production are optimised. Uniform geometrical specifications for energy storage systems and drive components reduce technical complexity and lower production costs. At the same time, the flexible platform increases manufacturing robustness, facilitates the integration of new technologies and maximises scalability. It paves the way for widespread introduction of the BMW iX5 Hydrogen into the BMW Group’s production network in 2028.

BMW Hydrogen strategy 
A technology-open approach and a diverse product portfolio continue to be key success factors for the BMW Group. By integrating fuel cell technology into the new BMW X5 series, the company is strategically expanding its production line-up and making the advantages of hydrogen available to its customers. Hydrogen enables electric driving with a long range and fast refuelling, diversifies energy sources and reduces dependence on a single infrastructure or chain of raw materials.

Through the "HyPowerDrive" project the development of the powertrain and the tank system of the BMW iX5 Hydrogen is funded by the Federal Ministry of Transport (BMV) within the framework of the IPCEI Hy2Move. The federal government is providing funding of EUR 191 million. In addition, the project is (co-)financed by the state of Bavaria with a total of EUR 82 million. The funding is implemented by the Project Management Jülich (PtJ) and coordinated by NOW GmbH.

Munich. The BMW Group is adopting a new and innovative hydrogen tank technology for the BMW iX5 Hydrogen. The new arrangement and size of the tanks enables a higher range of up to 750 km (up to 385 miles)*. The new BMW Hydrogen Flat Storage system offers the added advantage of making exceptionally efficient use of the space it occupies in the vehicle and is compatible with the Gen6 high-voltage battery, meaning that no room is lost inside the cabin. Models with fuel cell technology can therefore be built on the same production line as those with other drive system types. The 700 bar high-pressure hydrogen tanks additionally benefit from the mechanical protection provided by the vehicle structure, further increasing safety.

“Our new storage concept allows us to fit the hydrogen drive system into the new X5 precisely and in a way that saves space,” says Dr Joachim Post, Member of the Board of Management of BMW AG responsible for Development. “Think of it as installation Tetris: every customer gets the drive system best suited to their needs and a true BMW X5 with no compromises. This is technology openness and the art of engineering just the way we developers love them!”

Smart storage, more range.
The new flat tank system consists of seven high-pressure tanks made of carbon-fibre reinforced composite, which are connected with one another in parallel and integrated into a robust metal frame. What makes the design special is that, instead of individual pressure vessels, there are several chambers connected to form an enclosed unit. This unit is controlled by a central main valve. In this way, the optimised storage concept enables the BMW iX5 Hydrogen to achieve a greater range. This development alone accounts for several patent applications filed by the BMW Group. The system is able to store at least seven kilograms of hydrogen in total and can be filled from empty in under five minutes. As is customary for BMW hydrogen models, refuelling is safe, clean and fast. 

Experience hallmark BMW driving pleasure, refuel faster, drive further.
The BMW Hydrogen Flat Storage technology forms part of the powertrain. It combines with the fuel cell system and an innovative high-voltage battery to deliver the driving pleasure for which BMW is renowned. Here, the new BMW iX5 Hydrogen also benefits from the new Heart of Joy drivetrain and chassis control software, as well as BMW Dynamic Performance Control. It is also equipped with latest-generation Gen3 fuel cell technology, which is more efficient and powerful than any preceding generation. 

Flexible production to meet customer requirements. 
Thanks to the smart and highly flexible architecture of the new BMW X5, five different drive system variants of the model can be built to suit customer requirements: from battery-electric systems and plug-in hybrids through highly efficient conventional drive systems to hydrogen fuel cell technology.
Synergies in production are optimised. Uniform geometrical specifications for energy storage systems and drive components reduce technical complexity and lower production costs. At the same time, the flexible platform increases manufacturing robustness, facilitates the integration of new technologies and maximises scalability. It paves the way for widespread introduction of the BMW iX5 Hydrogen into the BMW Group’s production network in 2028.

BMW Hydrogen strategy 
A technology-open approach and a diverse product portfolio continue to be key success factors for the BMW Group. By integrating fuel cell technology into the new BMW X5 series, the company is strategically expanding its production line-up and making the advantages of hydrogen available to its customers. Hydrogen enables electric driving with a long range and fast refuelling, diversifies energy sources and reduces dependence on a single infrastructure or chain of raw materials.

Through the "HyPowerDrive" project the development of the powertrain and the tank system of the BMW iX5 Hydrogen is funded by the Federal Ministry of Transport (BMV) within the framework of the IPCEI Hy2Move. The federal government is providing funding of EUR 191 million. In addition, the project is (co-)financed by the state of Bavaria with a total of EUR 82 million. The funding is implemented by the Project Management Jülich (PtJ) and coordinated by NOW GmbH.

Munich. BMW Group Plant Munich is approaching the biggest milestone in the transformation process: series production of the BMW i3, the second model in the Neue Klasse range, gets underway here in August. This marks the start of the rollout of the Neue Klasse within the BMW Group’s global production network.

“We have been making rigorous preparations. With the BMW iFACTORY we have devised a consistent, strategic framework for our production,” explains Milan Nedeljković, Member of the Board of Management of BMW AG, Production. “We have paved the way for the upcoming start-ups in all our plants and have invested heavily in technologies, digitalisation and AI.”

BMW Group Plant Munich has undergone extensive modernisation in recent years. The result is a plant that now works even more efficiently, flexibly and digitally, and is optimally positioned for the requirements of electric mobility and the Neue Klasse.

But that’s not all: as of 2027, the Munich plant will exclusively produce all‑electric vehicles and thereby achieve a further boost in efficiency. This is assisted by proactive planning, close collaboration with development teams and suppliers, as well as modern production technology in the new structures. “We have considerably reduced production costs over recent years. With the start of production of the BMW i3, we will reduce overall production costs at the Munich plant by a further 10 per cent, bringing them below the level of the current vehicle generation,” says Peter Weber, Head of BMW Group Plant Munich. In addition to optimised production processes and targeted automation and digitalisation, the new vehicle architecture of the Neue Klasse also ensures efficiency.

Plant Munich is investing around 650 million euros in its transformation into a fully electric production site.

Highly efficient production at historic site

Plant Munich has been consistently reinventing itself for more than 100 years – from a location outside the city to today’s site surrounded by it. The facility has undergone a fundamental process of redevelopment for the Neue Klasse – with production of up to 1,000 vehicles a day continuing during this period. A new body shop and state-of-the-art vehicle assembly including new logistics areas were set up on an area spanning around a third of the plant’s footprint. Extensive updates have also been made to existing technologies.

Plant manager Peter Weber highlights what the workforce has achieved: “The people at the factory played an essential role in making this transformation a success. With their high level of expertise, enthusiasm and tremendous dedication, our employees have shown that world-class industrial production is possible even under the toughest conditions. The BMW i3 is just the beginning – several Neue Klasse models will be manufactured in Munich in the future, including the BMW i3 Touring.”

A vision for all technologies: the BMW iFACTORY

The BMW iFACTORY focuses on the areas of efficiency, sustainability and digitalisation. Within this framework, the company’s plants around the world are implementing site-specific solutions and, in so doing, strengthening the company’s resilience as well as its ability to deliver reliably at any time and worldwide. This vision has now also been consistently implemented across all technologies at BMW Group Plant Munich.

“We have rethought the entire value stream from supplier to finished customer vehicle. We have looked at every single process in detail and made optimisations. Now our plant is even more efficient, more flexible and even more digitised than ever before. We are thereby safeguarding the future viability of the plant,” adds Peter Weber.

In the press shop, steel and aluminium boards are turned into tens of thousands of components on highly automated press lines daily. Uniform press and tool standards across the global production network result in efficiencies on many levels: installation and integration of the systems are standardised, tools for the presses can be swapped within the network, and employees can work at various locations and help each other. An AI-assisted camera system supports quality control before an underground transport system moves the parts to the body shop. Output has increased significantly compared with previous structures. Cuts of steel and aluminium are collected, sorted and then used to manufacture new steel or aluminium coils.

Plant Munich has set up a new body shop for the Neue Klasse featuring systems planned and realised using a virtual twin. A total of 800 new industrial robots take care of the joining processes here; decreasing the number of joining processes to five reduces process complexity. With an automation rate of around 98 per cent, robots perform the majority of standardised processes. Automated surface inspection (ASI) assists with quality assurance.

In the paint shop at Plant Munich, digital and AI-assisted systems control central quality processes. Automated surface inspection (ASI) uses cameras and artificial intelligence to detect even the most minor deviations on the surface and documents them digitally. Automated surface processing (ASP) works on the variations detected directly during the running process. To purify the exhaust air, the paint shop uses the energy-efficient, electrically powered eRTO process. This is complemented by heat and energy recovery as well as water-saving cycles.

What once was the home of engine manufacturing at BMW Group Plant Munich has become a new assembly area for the Neue Klasse. The assembly area is set up for end-to-end digital processes: vehicles, systems and tools are interconnected and digital live tracking and automated inline quality checks support employees in the assembly line process. During assembly already, the BMW i3 digitally transmits the status of up to 20,000 features to the production system. Ergonomic workstations, height-adjustable systems and simplified processes lighten the load for employees, while targeted training supports new digital fields.

Aspart of the transformation, logistics at BMW Group Plant Munich has focused squarely on efficiency and direct integration of production. The logistics department at the Munich plant moves around 2.5 million parts every day; in future around 70 per cent of these parts will be delivered directly to the assembly workstations. This will reduce internal transport distances, save space and accelerate supply to the production lines. This is made possible by a multi-storey building structure developed specially for the plant’s city location. Delivery is at ground level and then conveyor technology transports the parts to the right levels, where they are distributed directly to the assembly workstations. This enables the principle of direct delivery to be applied systematically even in a multi-storey plant. At the same time, the level of automation in logistics has been significantly increased. Automated supply systems, smart transport robots and driverless transport systems will handle around 60 per cent of supply tasks in the future. A digital logistics control station manages all processes centrally, ensuring transparency and data-driven optimisation.

Unique to Plant Munich is the in-house seat manufacturing facility. It is a “plant inside a plant” and takes on a central role for quality assurance and expert evaluation within the production network. The seats for all versions of the models produced in Munich are manufactured here and delivered to vehicle assembly directly and “just in sequence”. The in‑house seat manufacturing facility is regarded as the benchmark for quality assurance across the BMW Group. Modern, largely automated processes ensure seamless quality control. This is complemented by fully automated end-of-line checks, including for safety-relevant components. The seat manufacturing facility also systematically strengthens the BMW Group’s in-house expertise. It serves as a competence centre and innovation hub, tests new materials, technologies and manufacturing concepts, and supports the evaluation of costs, quality and production processes – making an impact far beyond the Munich location.

Global network, regional value creation: high-voltage batteries and e-drive

With the new assembly plant for high-voltage batteries in Irlbach‑Straßkirchen (Lower Bavaria, Germany) around 90 minutes away, the BMW Group is significantly boosting value creation in the Bavaria region. In keeping with the “local for local” approach, Irlbach-Straßkirchen will deliver high-voltage Gen6 batteries to the Munich plant as well as other German locations. Here, the batteries will be installed in the BMW i3. Manufacture of the high-voltage batteries combines a rigorous zero-defect approach with the latest production technologies, which were developed at Bavarian pilot plants. With seamless inline quality controls, digital twins and the systematic use of artificial intelligence, the BMW Group is setting new standards in battery production.

The Gen6 e-motor for the BMW i3 is produced at BMW Group Plant Steyr in Austria – a location that has been manufacturing drivetrains for over 40 years. With the first e-motor in the portfolio, the plant is developing its role as a prime example of technology openness. All core components of the highly integrated e-drive – from the rotor and stator to the inverter and transmission – are produced on-site. New production lines and state‑of‑the‑art clean room environments have been set up for this. The aluminium foundry at BMW Group Plant Landshut supplies the e-motor housing for Plant Steyr.

From the management summary of the study: "The transformation of the entire transport sector towards fossil-free energy sources is a challenge that cannot be met by the electrification of drive systems alone.

It is therefore essential to realise the CO2 reduction potential of all energy sources.

In addition to hydrogen, for example, the focus here is primarily on liquid fuels that can be integrated into the supply infrastructure without technical modifications.

Renewable fuels - so-called Carbon Neutral Fuels, CNF for short - is a collective term that includes all fuels that have a lower CO2 value compared to fossil fuels. This study analyses the substitution potential of advanced, renewable fuels from biological feedstocks compared to fossil fuels in all sectors of the EU.

Based on current scientific literature and various scenarios, this study analyses the availability of advanced feedstocks, the conversion to renewable fuels and the development of fuel demand in road transport in the European Union for the target years 2030, 2035 and 2040."

The full study can be found as a pdf attached to this press release.

Munich. With the Neue Klasse, BMW is taking bidirectional charging to the next level, making Vehicle-to-Home (V2H), Vehicle-to-Load (V2L) and Vehicle-to-Grid (V2G) accessible to all customers. V2G is launching now: The BMW Group and E.ON are continuing their long-standing strategic partnership and are taking the next step following the successful announcement of Germany’s first commercial Vehicle‑to‑Grid offer at IAA Mobility in September 2025. As of today, private customers can order the complete product package, consisting of the BMW Wallbox Professional, the V2G electricity tariff from E.ON (E.ON ÖkoStrom Home & Drive V2G together with the E.ON V2G Plus feed-in contract), and – if not already installed – an intelligent metering system (smart meter).

V2G for the Neue Klasse: Plug in and secure a 720 Euro bonus and charge up to 14,000 kilometres for free* - additional discount of 700 Euros on the BMW Wallbox Professional** for the first customers.

This offer enables BMW electric vehicles of the Neue Klasse equipped with the 6th generation BMW eDrive technology, starting with the new BMW iX3, to actively interact with the power grid by feeding energy from the vehicle’s high‑voltage battery back into the grid.

Automatic charging and discharging is managed by a jointly developed BMW E.ON algorithm. Customers benefit from every hour their vehicle is plugged in, receiving an annual bonus of up to 720 Euros. This allows BMW iX3 drivers to cover up to 14,000 kilometers per year at no charging cost**, while also contributing to the future of sustainable energy.

The My BMW App provides simple and transparent control. Customers maintain full oversight of current and target charge levels and can check their real-time bonus status with E.ON directly in the app. Intelligent protection functions ensure the high-voltage battery always remains within an optimal operating range.

Promotion: 700 Euro wallbox discount on the first orders**

The first 100 BMW iX3 customers who choose an E.ON V2G electricity tariff will receive a 700 Euro discount on the BMW Wallbox Professional.** With 11 kW charging power, it is one of the first bidirectional wallboxes on the market and offers additional intelligent charging modes.

V2G at a Glance

Tariff & Compensation model: The E.ON ÖkoStrom Home & Drive V2G tariff offers full price certainty thanks to a fixed energy price per kilowatt-hour and a fixed base fee for both household and charging electricity. Through the V2G feed-in contract, the customer’s bonus account accumulates up to 720 Euro annually** for every hour the vehicle is connected to the bidirectional wallbox and V2G is activated—regardless of whether energy is charged or discharged. Each kilowatt-hour discharged back to the grid is compensated at 40 Euro-Cent per kWh.

Customer-focused: Drivers maintain full control and can set their charging targets in the My BMW App to ensure mobility needs are always met. The bonus account with E.ON is linked to the app and can be viewed transparently at any time.

Battery protection: Intelligent safeguards ensure the high-voltage battery always operates within an optimal range.

Contribution to the Energy Future: Vehicle batteries help stabilize the energy system during periods of surplus electricity or increased demand. V2G supports the optimal use of renewable energy and reduces long-term energy-system costs.

Filip Thon, CEO of E.ON Germany: “The first commercial V2G offer in Germany marks a groundbreaking milestone, linking electromobility with the energy transition—and enabling private customers for the first time to tap into the potential of electric vehicles as flexible power storage for tomorrow’s energy world.”

Marcus Krieg, Head of New Business Models at BMW Group: “With the Neue Klasse, BMW vehicles become an active part of the energy ecosystem for the first time. Their technology enables intelligent storage and return of energy to the grid, reducing customer costs while strengthening the use of renewable energy.”

New: Alternative entry into energy‑market integration – cost‑optimized charging for all BMW and MINI electric drivers, incl. attractive E.ON tariff with charging bonus

The BMW Group now offers a solution for all customers wishing to charge their fully or partially electric BMW/MINI intelligently while reducing home‑charging costs.

The vehicle charges automatically at selected locations when electricity prices are especially low—taking planned departure times and target charge levels into account. This function is available for all electrified BMW and MINI models across all drive generations and can be used with the BMW/MINI Wallbox Plus, the Multifunction Charger (MFC), and any other AC‑charging device.

Customers only need an electricity tariff that supports BMW’s remote charging‑control functionality. Many compatible electricity providers offer this, including E.ON.

In this exclusive partnership offer, BMW and MINI customers in Germany using the E.ON ÖkoStrom Home & Drive tariff can save up to 240 Euros*** annually and receive an additional 50 Euros*** bonus on top of the existing new‑customer bonus.

Customer Benefits

•      Significant reduction in home charging costs

•      Consideration of individual mobility needs

•      Protection of vehicle components

•      Additional E.ON bonus of 50 Euros on top of the new‑customer bonus

More information:

www.eon.de/de/pk/landingpage/kooperationen/bmw-mini

List of compatible electricity providers:
Elektromobilität | BMW FAQ

More on V2G and the offer:
https://www.bmw.de/de/elektroauto/home-charging.html

https://www.eon.de/de/pk/e-mobility/bidi-laden-bmw-ix3.html

Bidirectional and flexible charging are key topics E.ON is showcasing at E‑World, Europe’s largest energy trade fair, taking place from February 10–12 in Essen.

*  With the E.ON V2G electricity tariff, customers receive a bonus based purely on the connection time of the BMW iX3 or other compatible BMW models to the BMW Wallbox Professional, provided that Vehicle-to-Grid (V2G) is activated as an application (regardless of actual charging/discharging processes).

The bonus amounts to 24 Euro cents per hour, with a maximum of 60 Euros per month/720 Euros per year possible, based on 250 hours of connection per month. Based on an average working price of 32.97 Euro cents/kWh, the bonus covers up to 2,184 kWh charged per year. Depending on the vehicle configuration of the  BMW iX3 50 xDrive, this covers approximately 12,000 km – approximately 14,000 km of annual mileage (WLTP)

– with driving consumption depending on configuration between 15.1 kWh/100 km – 17.9 kWh/100 km according to WLTP BMW iX3 50 xDrive. In addition to the bonus, there is a feed-in tariff for every kilowatt hour fed back  into the grid. The combination of V2G with a photovoltaic system is currently only supported for full feed-in systems.

** The promotion is valid for the BMW Wallbox Professional in conjunction with the E.ON ÖkoStrom Home & Drive V2G electricity tariff and the E.ON V2G Plus supplementary contract from our cooperation partner E.ON Energie Deutschland GmbH. There is no entitlement to the voucher if the electricity contract is revoked within the statutory period. After signing the contract and successful verification of the information, you will receive a voucher worth 700 Euros including VAT by post from E.ON Energie Deutschland GmbH on behalf of BMW AG. This can only be applied to the purchase price of the BMW Wallbox Professional in the e-mobilio GmbH web shop ( bmwgroup.e-mobilio.de ) and is redeemable until December 31, 2026. The promotion is only valid for private customers. Only valid while stocks last.

***The potential annual savings of up to 290 Euros result from a night-time charging bonus of 240 Euros (120 Euros each for app registration and night-time charging) and an additional new customer bonus of 50 Euros, which is exclusively available to BMW customers and is paid out with the annual statement.

Hams Hall, UK. BMW Group’s Hams Hall plant, located in the UK, has reached a major milestone: For exactly 25 years, the plant near Birmingham has produced highly efficient internal combustion engines for a variety of BMW Group vehicle models. More than 7.6 million engines have shipped from Hams Hall since 2001. The facility supplies numerous production sites worldwide with highly efficient petrol engines for the BMW, MINI and Rolls-Royce brands, including drive trains for plug-in hybrid models – making the plant an integral part of the BMW Group’s technology-open approach. Today, Plant Hams Hall produces three and four-cylinder petrol engines to high performance V8 engines, powering vehicles across both BMW and MINI. Separately, the V12 engine is produced at Plant Hams Hall exclusively for Rolls-Royce Motor Cars. Its assembly follows a distinct, bespoke production process, carried out by specially trained engineers and technicians, before final delivery to the Home of Rolls-Royce at Goodwood.

Plant Hams Hall – an integral part of the global production network

"This anniversary is a special milestone for our site," says Dirk Dreher, Head of the BMW Group's Hams Hall plant. "We are a competitive plant and there’s always been a real passion among our workforce to continually improve our manufacturing processes and site. Building on our strong foundation, we are looking forward to remaining a successful plant in the future."

“The Hams Hall plant is an integral part of our global production network,” explains Harald Gottsche, Head of Engine Production at BMW AG. “The site combines technological expertise with high flexibility. It reliably supplies our vehicle plants with efficient, powerful engines of premium quality. This includes the V12 engine – a masterpiece from Hams Hall!”

61% reduction in energy use per engine built since the start of full production

The British engine plant is systematically implementing the principles of the BMW iFACTORY. The strategic vision of the BMW iFACTORY focusses on sustainability, electrification, digitalisation and profitability. From the first concept of the plant to the present day, the Hams Hall team has made sustainability a key consideration. Since the first full year of production, the plant has made a 61% reduction in energy required per engine built, meaning the overall energy to operate the site has remained level even though there has been a considerable increase in production. The plant purchases 100% of its external electricity from renewable energy sources today. It has also worked to reduce its consumption of natural gas.

SpOTTO robotic dog scans and monitors manufacturing equipment

A four-legged autonomous robot named “SpOTTO” joined the Hams Hall team in 2024. The autonomous robotic dog scans the plant, supports maintenance and ensures production processes run smoothly. Equipped with visual, thermal and acoustic sensors, SpOTTO collects valuable data for the plant’s digital twin. It also serves as a watchdog, monitoring the maintenance of production facilities. SpOTTO was developed by Boston Dynamics under the product name “Spot”, an agile robot capable of climbing stairs and traversing rough terrain with ease. At Hams Hall, “Spot” was fondly renamed SpOTTO, paying tribute to the engine plant’s proud heritage: Gustav Otto, one of the founders of BMW, was the son of Nicolaus Otto, inventor of the four-stroke engine.

Fully connected digital twin: Big data on three levels

At the core of the Hams Hall plant’s digital transformation is the fully connected digital twin, which consists of three levels: On the first level, 3D representations of the entire plant are generated. The second level comprises a large data layer, continuously updated with all relevant information from the SpOTTO robotic dog, the plant’s manufacturing equipment and its IT systems. On the third level – the application level – dedicated programmes organise the collected data into comprehensible units. Using special apps, experts at Plant Hams Hall can leverage this information for tasks such as production planning and quality assurance.

A history of continuous growth

Over the past 25 years, BMW Group Plant Hams Hall has continuously evolved, establishing itself as a key pillar of the company’s production network. Relying on state-of-the-art manufacturing technologies, it provides drive trains for numerous BMW, MINI and Rolls-Royce models.

Selected historic milestones:

• 2001: Plant Hams Hall launches series production with new four-cylinder engines, using innovative Valvetronic technology in large-scale manufacturing for the first time.
• 2006: An additional engine family is introduced; Plant Hams Hall produces engines for the MINI brand for the first time.
• 2013: Plant Hams Hall becomes the exclusive manufacturer of the award-winning three-cylinder engine for the iconic BMW i8 plug-in hybrid sports car. The plant also integrates additional production lines for three- and four-cylinder petrol engines. At the same time, the processing hall for crankshafts, crankcases and cylinder heads is expanded.
• 2022: The plant takes over production of V8 and V12 engines. With this step the plant generates even greater business value for the company.
• 2026: Plant Hams Hall celebrates 25 years of production.

The BMW Group’s drive train production network

The BMW Group’s engine production network comprises several plants alongside Hams Hall: Its largest engine facility is in Steyr, Austria, where diesel and petrol engines, as well as sixth-generation electric motors, are developed and produced. The fifth generation of electric motors is produced in Dingolfing. Plant Munich handles mechanical production of V8 and V12 engine components, while Plant Landshut manufactures special engines. The Chinese joint venture BMW Brilliance builds engines for the local market in Shenyang. Collectively, these locations support the BMW Group's technology-open powertrain strategy.

Munich/Salching. The new Cell Recycling Competence Center (CRCC) in Salching in Lower Bavaria has now been officially commissioned – marking a major step forward in implementing innovative direct recycling as a joint project between the BMW Group and Encory GmbH. For construction and operation of the new Competence Center, the BMW Group and Encory are relying on regional partners.

Innovative direct recycling enables reuse of battery raw materials

Direct recycling allows residual materials from battery cell production, including complete battery cells, to be mechanically dismantled. The raw materials are not entirely reverted to their original state, but are instead “directly” fed back into the cell production cycle. This direct recycling methodology, developed by experts from the BMW Group, therefore eliminates the conventional, energy-intensive chemical or thermal processing previously required. At the new CRCC, direct recycling will be scaled up and introduced in stages until, once fully operational, the annual volume of battery cell material recycled will be in the mid-double-digit tonne range. Going forward, the recovered raw materials will be directly reused in pilot production of battery cells at the company’s own Cell Manufacturing Competence Center (CMCC) in Parsdorf.

Direct recycling: A process for the future

“Our direct recycling process puts us at the forefront of the industry,” explains Markus Fallböhmer, SVP of Battery Production at BMW AG. “This technology has tremendous potential to further optimise battery cell production.” It is also conceivable that, for the first time, cell manufacturers could be enabled to use direct recycling in series production.

Joint venture runs Competence Center – IP remains with BMW Group

An existing hall in Salching in Lower Bavaria (Straubing-Bogen district) will be used for the new Competence Center. In addition to the production area and warehouse space of around 2,100 m², the building also offers just under 350 m² of offices and break rooms, as well as photovoltaic systems on the roof. While the Competence Center will be built and operated by Encory GmbH, the intellectual property for the recycling method is fully owned by the BMW Group. As a joint venture between the BMW Group and the Interzero Group, Encory will develop and implement logistics and consulting solutions, including for recovery, recycling and reconditioning of vehicle components. Both partners hold a 50-percent stake in the company. The new Competence Center will employ about 20 people.

Strong partners from the region

With the exception of one Swiss company, only German firms were contracted for the construction and operation of the Competence Center. Nearly half of these companies are located within a 100-kilometer radius of Salching.

Optimal location for new Competence Center in Bavaria

The BMW Group consolidates its battery cell expertise at its Competence Centers in Munich, Parsdorf and Salching. The Battery Cell Competence Center (BCCC) in the north of Munich offers state-of-the-art labs and research facilities for developing the battery cells for next-generation high-voltage batteries and producing them in small quantities. The best battery cell from the BCCC will be scaled up for series processes on a pilot line at the Cell Manufacturing Competence Center (CMCC) in Parsdorf. Recycling of surplus material from pilot production in Parsdorf will take place at the new Cell Recycling Competence Center (CRCC) in Salching. The recovered raw materials will then be reused in cell production, ensuring short distances between all Competence Centers and preventing valuable raw materials from being lost. Following on from the BCCC and CMCC, the CRCC thus represents the next step in the BMW Group’s battery cell strategy on the road to the circular economy.

Circular economy at the BMW Group

The BMW Group views the circular economy as one of the key issues in shaping more resource-efficient mobility. Its approach is aimed at finding the best ways to keep materials in the cycle – ensuring that resources are not lost, but retain their value for long-term use. The BMW Group applies the principles of Re:Think, Re:Duce, Re:Use and Re:Cycle. From vehicle design and production, to recycling and reuse, everything is geared towards ensuring that vehicles can serve as a source of raw vehicles at the end of their use phase. The BMW Group is taking steps to increase the percentage of recycled materials. It returns selected production residues to the material supplier or material processor, enabling their recovery and reintroduction into a new manufacturing process. In this way, recycled and reused materials are already making their way into BMW Group vehicles today. The circular economy requires holistic thinking – from product design, all the way through to vehicle recycling. 

Munich. Since 2022, the BMW Group and Solid Power, Inc. (Nasdaq: SLDP) have intensified their activities for the development of all-solid-state battery (ASSB) technology through their technology transfer agreement. The latest milestone was the integration of Solid Power’s large-format pure ASSB cells into a BMW i7 technology test vehicle.

As of October 2025, Samsung SDI joins the efforts to pursue development and validation of the ASSB technology in the automotive field. The new collaboration marks a key step towards ASSB technology, bringing together the complementary expertise of three industry leaders.

Under this arrangement, Solid Power will supply sulfide-based solid electrolyte to Samsung SDI, which Samsung SDI will integrate into separator and/or catholyte and use to build cells, in each case subject to achievement of technical requirements.
These cells will be evaluated based on performance parameters and requirements to be agreed between Samsung SDI and BMW Group. Ultimately, Solid Power, Samsung SDI, and BMW aim to develop and supply ASSB cells for integration into a next generation of evaluation vehicles.

 “We are excited to partner with Samsung SDI and BMW to progress the development of all-solid-state batteries,” said John Van Scoter, President and CEO of Solid Power. “Our solid electrolyte technology is designed for stability and conductivity, and by working closely with global leaders in automotive and battery innovation, we strive to bring ASSB technology closer to widespread adoption.”

"Technological competitiveness in batteries would ultimately lead to innovation in electric vehicles," said Stella Joo-Young Go, Executive Vice President of ASSB Commercialization Team at Samsung SDI. "Samsung SDI will work closely with great global partners like BMW and Solid Power to take the lead in commercializing ASSB."

 
Martin Schuster, Vice President Battery Cell and Cell Module at the BMW Group, says: “With Samsung SDI joining our partnership with Solid Power, we gain significant momentum on our path advancing the development of new battery cell technologies. This global collaboration is another proof point of our overarching goal: to be always in a position to offer our customers state of the art battery technology.”

The partners believe in the potential of genuine ASSB technology, and the promise of higher energy density combined with increased safety compared to today’s technologies by replacing liquid electrolytes with solid materials.  

With increased energy density, longer vehicle ranges can be achieved without having to accept disadvantages in terms of weight of the overall storage system.

The BMW Group and Solid Power have been cooperating since 2016 through an extended “Joint Development Agreement,” which was supported by a BMW Group investment in Solid Power in May 2021 as part of a financing round.

At the end of 2022, BMW and Solid Power agreed to further deepen their partnership. BMW will operate a solid-state cell prototype line at the CMCC in Parsdorf, on the basis of a research and development license and with Solid Power's experience and expertise.

Since 2008, the BMW Group has been consistently building up its competence in the field of battery cell technology. Since 2019, this know-how has been pooled at the BMW Group's Battery Cell Competence Center (BCCC) in Munich. The BCCC covers the entire value chain, from research and development to battery cell design to producibility.

In order to be able to quickly and efficiently implement innovations in the field of battery cell technology, the BMW Group cooperates in a network of around 300 partners, including established companies, start-ups and universities, among others.

The BMW Group's battery strategy - to operate on equal footing with industry's leading cell manufacturers through deep know-how - has proven its worth. This strategically strong position in the value chain ensures the BMW Group access to all new and innovative battery cell research solutions worldwide.

Luxembourg / Munich. The BMW Group is using its presence at the "Fleet Europe Days" on 22 and 23 October in Luxembourg to show fleet operators ways to decarbonise their fleets. In addition to fully electrified vehicles, the focus will be on fuels based on renewable raw materials.

Their advantage: the potential to save CO₂. With more than 250 million existing vehicles in Europe, their CO₂ footprint can be improved if the proportion of renewable fuels is increased. A new technical solution used by the BMW Group is proof that all BMW diesels in a fleet are fuelled exclusively with HVO100. Refuelling data from the vehicle is compared with data from the fleet operator's payment system. This means that the fuel used by the vehicle can be traced seamlessly. An important step towards an "HVO100 only fleet" for fleet customers.

Dr. Martin Kaufmann, Head of Powertrain Development at the BMW Group: "Our goal is always to have more environmentally friendly and efficient vehicles on the road. With the diesel replacement fuel HVO100, we have an opportunity to reduce the CO₂ footprint of vehicle fleets. Especially in the area of fuels that are not based on fossil fuels, we see a potential that we are ready to realise.”

Bernhard Kuhnt, Head of Sales Region Europe, BMW Group: "Fleet customers are extremely important for sales in Europe and at the same time diesel remains a very good powertrain technology for many fleets.

The use of HVO100 offers a way to quickly reduce CO₂ emissions that takes into account individual use cases - whether driving long distances or towing a trailer - and can thus help our fleet customers reduce their CO₂ footprint."

Initial contractual agreements with the operators of large BMW diesel fleets in Germany and Italy are imminent. These test fleets, together with the internal BMW Group fleet that has already been launched, will provide important data and findings for the further improvement of the technical solution.

HVO100 used in the first fuelling of all diesel produced in Germany

Since January 2025, all diesel models produced in Germany are being fuelled with HVO100 before delivery to dealers. This step underlines BMW's commitment to making decarbonisation possible and achievable today. The abbreviation HVO stands for 'Hydrotreated Vegetable Oil' and the suffix '100' indicates that it is filled with 100 per cent pure fuel.

 
"Neste MY Renewable Diesel™" HVO100 is used at the BMW Group plants in Munich, Dingolfing, Regensburg and Leipzig.

The fuel from Finnish manufacturer Neste enables a CO2e reduction of up to 90 per cent ("well to wheel") compared to fossil diesel. The initial filling at the plants before delivery to the BMW Group dealer organisation is five to eight litres, depending on the model.

For the BMW Group, technological openness is a top priority. "Options instead of bans" is its motto. The company continues to invest in a broad portfolio - from battery electric vehicles, plug-in hybrids and hydrogen fuel cells to highly efficient combustion engines that can run on renewable fuels.

The BMW Group has long approved its vehicles for a variety of renewable fuels - including HVO100, B10 and eFuels according to the EN590 standard for diesel engines, and E25 and eFuels according to the EN228 standard for petrol engines.

Regulatory framework conditions must catch up

Regulation must catch up. To accelerate the uptake of renewable fuels across the market, the BMW Group is calling for an ambitious implementation of the Renewable Energy Directive (RED III), including national quotas that require at least a 30% reduction in greenhouse gas emissions from fuels, to be transposed into national law by 2025.

Dr. Thomas Becker, Head of Policy, External Relations and Sustainability at the BMW Group, says: "The BMW Group demands that every measure to reduce CO₂ emissions is taken into account at every stage of a vehicle's life cycle. This also includes the use of renewable fuels - especially for vehicles that primarily run on CO₂-neutral fuel (CNF). These must be formally recognised in EU fleet legislation. The fuels are available, what we need now is a pragmatic and quickly implementable regulation that enables companies to develop innovations and make them marketable."

Munich. BMW Charging and MINI Charging have partnered with Digital Charging Solutions GmbH (DCS) to present an innovative fleet application that greatly simplifies the monitoring and centralised billing of vehicle charging for companies.

This solution links the charging accounts of the fleet vehicles with a central company account. Charging for each driver is automatically invoiced and consolidated into one payment for the company. Fleet drivers can take advantage of the same features, tariffs and brand experiences as private customers.

The introduction of this new fleet solution from BMW Charging and MINI Charging marks another milestone in the electrification of corporate fleets. Specially designed for small and medium-sized companies with up to 50 electric vehicles, it provides an efficient and user-friendly charging solution – and features a central overview that shows all charging sessions and combines them into a single invoice. Businesses benefit from a solution with no setup costs that offers automatic reimbursement for fleet drivers. 

Implementing the fleet solution is quick and straightforward. First, fleet managers create a company account with CHARGE NOW to register their company. Then fleet drivers create a business customer account including a charging contract with BMW Charging or MINI Charging and activate the option for bill payment by the company. Finally, the fleet manager links the driver accounts to the company account, enabling centralized and automated billing. 

This solution optimises charging cost management for electric fleets, reduces the administrative workload and improves cost transparency.

Fleet managers benefit from consolidated invoicing for all charging sessions as well as a central dashboard for monitoring up to 50 vehicles from different brands.

Fleet drivers, meanwhile, enjoy a consistent user experience offering the same functions (e.g. Plug & Charge), tariffs and brand experiences provided for private customers – thanks to seamless integration in the vehicle and the My BMW App or MINI App.

Once activated, charging sessions are automatically paid by the company, without any need for private advance payments or manual refunds. 

The solution was launched in August of this year in eleven European markets: Austria, Belgium, France, Germany, Luxembourg, Italy, the Netherlands, Spain, Portugal, Switzerland and the United Kingdom. They were followed in September by Sweden, Norway, Poland, Czechia, Denmark, Slovakia, Hungary and Finland. 

Further information can be found via the following link:
CHARGE NOW | Fleet Solution | United Kingdom 

Debrecen. With an impressive ceremony that artistically combined Hungarian culture and modern automotive production, Oliver Zipse, Chairman of the Board of Management of BMW AG, today officially opened the BMW Group plant in Debrecen. The BMW Group’s newest and most innovative production site marks the beginning of a new era for the company. In late October, the new BMW iX3 will enter series production in the Hungarian university town of Debrecen as the first vehicle of the Neue Klasse. Plant Debrecen was planned virtually and realised in practice fully in line with the principles of the BMW iFACTORY, becoming the first BMW Group car plant to rely entirely on electricity from renewable energy during normal operation.

In addition to Oliver Zipse, high-ranking representatives from Hungarian politics, such as Prime Minister Viktor Orbán and the Mayor of Debrecen, László Papp, as well as Milan Nedeljković, Member of the Board of Management for Production, Ilka Horstmeier, Member of the Board of Management for Human Resources and Real Estate, and Hans-Peter Kemser, President and CEO BMW Manufacturing Hungary Kft., attended the grand opening.

“In our global production network, our new plant in Debrecen is a pioneer: It is our first fully-electric plant, the first production site to operate entirely without fossil fuels – and the first to build vehicles for the Neue Klasse. This makes our plant in Debrecen a decisive factor in the BMW Group's future success,” said Oliver Zipse. “The opening also sends a strong signal: We are expanding our footprint on our home continent and reaffirming our commitment to Europe as a strong and competitive location for industry.”

Hans-Peter Kemser added at the ceremony: “This is not only a new BMW Group plant – it is a cornerstone of progress. We are a partner to culture, to education and to the University of Debrecen, where together we foster the talents that will shape the future. And above all, it is a community – deeply embedded in the life of Debrecen and Hungary.”

Strengthening the industrial base and expanding training

The official opening ceremony began with a look back at the plant’s construction, following a 2018 decision that launched one of Hungary’s largest greenfield investments. The BMW Group’s first Central European location has firmly placed Debrecen on the region's automotive map, creating more than 2,000 direct jobs – and many more along the supply chain, at regional suppliers and service providers that have recently established themselves in Debrecen, alongside national and international companies. The new plant has also strengthened the industrial park and driven additional investment in transport and infrastructure.

At the same time, through collaborations with institutions such as the local university and the Vocational Training Centre of Debrecen, DSZC, Plant Debrecen has also become one of the largest training hubs for dual education programmes in Hungary.

Only the best of the best for Debrecen

Plant Debrecen is the first BMW Group production site not tied to a specific primary plant. Instead, it serves as a network plant, combining best practices from different locations worldwide. For example, the press shop is modelled on the systems used in Spartanburg (USA) and Swindon (Great Britain), with their know-how and technologies further refined for Debrecen. In the body shop, the positioning of nearly 1,000 industrial robots, along with their processes, was digitally simulated in detail beforehand. The number of joining methods was also significantly reduced, with further streamlining allowing design features for the Neue Klasse to be integrated early in development.

Paint shop key to largest reduction in CO₂e emissions

At BMW Group Plant Debrecen, the paint shop plays a critical role in significantly reducing the BMW iX3’s CO₂e footprint. Production of the new BMW iX3 will generate a total of about 80kg CO₂e (scope 1/2 emissions). This figure covers CO₂e emissions from Plant Debrecen, as well as in-house parts production at other BMW Group facilities, including components manufactured in Landshut, for example. This represents a reduction of approx. two-thirds compared to production of existing BMW derivatives. For Plant Debrecen alone, this approach will reduce CO₂e emissions from the manufacture of a vehicle, including its high-voltage battery, by around 90% – to about 34 kg CO₂e (when operating at full capacity, compared with other BMW Group facilities).

About a quarter of the plant's annual power needs will be supplied by the 50‑hectare on-site photovoltaic system, one of the largest in Hungary. Surplus solar energy, such as that generated on non-working days, is stored in a 1,800 m³ thermal storage system with a capacity of 130 MWh.

Digitalised assembly processes and smart “finger structure”

Complete digitalisation of production processes further boosts assembly efficiency – for example, sensors and camera systems along the production line are used to automate quality processes. AI evaluates the data and provides real-time feedback to employees on the assembly line. The building's “finger structure” – an optimised version of BMW Group Plant Leipzig – allows 80% of parts to be delivered directly to the correct point of assembly on the line. In-house logistics are fully electric.

High-voltage battery assembly in line with “local for local” principle

High-voltage batteries are assembled directly on site, allowing for short distances in line with the “local for local” principle. Plant Debrecen will be the first of five plants worldwide to begin series production of Gen6 high-voltage batteries at this location. Seamless in-line quality inspections and 100% end‑of‑line monitoring enable a consistent zero-defect approach.

Final photo with employees and two BMW iX3s

The opening ceremony concluded with a music and dance performance celebrating Hungarian culture and traditions, which the BMW Group also supports through local events and organisations. To wrap up, numerous employees joined Viktor Orbán and Oliver Zipse on stage, alongside two new BMW iX3s.

Munich. The BMW Group is launching a vehicle with five different drivetrain technologies. The new BMW X5 will be the first model to offer customers a choice of battery electric, plug-in hybrid, petrol, diesel, and hydrogen fuel cell technology. The HyMoS (Hydrogen Mobility at Scale) initiative is designed to promote the development of hydrogen ecosystems and refueling stations in metropolitan areas and aims for an initial pilot implementation in Germany.

“By launching the new BMW X5 with a choice of five drive system variants, we are once again demonstrating our leading position as a technology pioneer,” says Joachim Post, Member of the Board of Management of BMW AG, Development at an BMW event in New York. “Hydrogen has an essential part to play in global decarbonisation, which is why we are committed to driving the technology forward.”

Technology-open approach is a strategic success factor

Product diversity continues to be a key success factor for the BMW Group. A wide-ranging portfolio of drive systems – encompassing ICE engines, plug-in hybrids, battery electric drive systems and, starting with the new BMW iX5 Hydrogen in 2028, hydrogen fuel cell technology – lays the foundations for successfully meeting the varying demands and needs of customers worldwide both now and in the future.

Flexible manufacturing structures and high levels of integration expertise enable this array of drive technologies to be implemented efficiently in the new BMW X5 range in terms of development, purchasing and production. This means the BMW model line-up will include two types of fully electric drivetrain (battery electric and hydrogen fuel cell) from 2028, underlining the rigorous application of the brand’s technology-open approach.

The new BMW iX5 Hydrogen

Following successful testing of the pilot fleet worldwide, the new BMW iX5 Hydrogen* will enter the market as the brand’s first-ever series-produced hydrogen-powered model. “The new BMW iX5 Hydrogen will be a true BMW - pioneering in its class and delivering the BMW typical driving pleasure,” says Michael Rath, Vice President Hydrogen Vehicles BMW Group. 

The drive technology is based on the third-generation fuel cell system that the BMW Group is developing in collaboration with the Toyota Motor Corporation.This technological advance paves the way for a system with a more compact design that is also more powerful and efficient, thereby increasing range and output at the same time as reducing energy consumption. The company’s competence centres in Munich and in the BMW Group Plant Steyr are already building first prototypes. Further drive system components will come from the BMW Group plant in Landshut.

Benefits of hydrogen-powered technology

Hydrogen is recognized as a promising future energy carrier for global decarbonization. It acts as an effective storage medium for renewable energy sources, helping to balance supply and demand and enabling a more stable and reliable integration of renewables into the energy grid. Hydrogen is the missing piece for completing the electric mobility puzzle where battery electric drive systems are not an optimal solution.

HyMoS initiative: alliance for strengthening the hydrogen infrastructure

As well as developing the new BMW iX5 Hydrogen, BMW is also actively involved in efforts to expand the hydrogen refueling network. The HyMoS (Hydrogen Mobility at Scale) initiative was established to support hydrogen ecosystems for mobility in cooperation with industry and institutional partners. The aim of this initiative is to increase the economic viability of hydrogen mobility ecosystems by pooling the demand for all types of vehicles, including trucks, buses and passenger cars. This will help to reach an optimal distribution and usage of hydrogen stations. The initiative supports existing hydrogen ecosystem projects in achieving their full potential by sharing experiences across projects and providing ground support of its industry partners. A pilot phase started with the support of existing ecosystems in Germany and France to gather experiences for deployment to further metropolitan areas and a potential later expansion to other countries.

Munich.  As part of their long-standing strategic partnership, BMW Group and E.ON are launching Germany’s first commercial Vehicle-to-Grid (V2G) solution for private customers.

Thanks to bidirectional charging, the BMW iX3 becomes an active participant in the energy market—able not only to consume electricity but also to feed energy back into the grid when needed. This groundbreaking offering represents a major technological and market milestone, seamlessly integrating electromobility with the energy transition. For the first time in Germany, electric vehicles can be used as flexible energy storage units in everyday life. 

Charge for free, support the energy system:  How the new V2G solutions works

The new Vehicle-to-Grid (V2G) solutions enables customers to benefit from bidirectional charging: the high-voltage battery of their BMW iX3 can flexibly supply energy back to the grid via the BMW Wallbox Professional. Intelligent energy management is provided in collaboration with E.ON, supported by a specially designed V2G electricity tariff that facilitates the flow of energy in both directions.

The underlying software was jointly developed by BMW Group and E.ON. The service is not only user-friendly but also financially attractive: customers who make their vehicle battery available for smart charging and discharging can earn an annual bonus of up to €720. This enables them to drive up to 14,000 kilometers per year at no charging cost while actively supporting the energy transition.

Marc Spieker, Member of the Board of Management of E.ON SE, Commercial: “What our customers need is a reliably charged vehicle—simple, convenient, and at attractive costs. That’s exactly what we provide, and more. Together with BMW, E.ON is bringing Vehicle-to-Grid directly to the people. Neue Klasse meets new energy! This is how we unlock the potential of the vehicle for each individual’s personal energy future. We combine charging convenience with tangible economic benefits. And, as a bonus, every connected vehicle can help lower the overall costs of the energy system—for the benefit of all.”

Dr. Joachim Post, Member of the Board of Management of BMW AG, Development: „With the Neue Klasse, BMW makes the car an active part of the energy system, creating tangible customer value. Vehicle-to-Grid reduces the mobility costs of the customer through new revenue opportunities – while driving the future of electric mobility.”

Driving flexibility in the energy system with vehicle-to-grid

The new V2G offering marks a milestone in coupling the energy sectors of mobility and electricity: the vehicle becomes an integral part of a virtual storage system that can better integrate renewable energies and thus support the energy system.

Overview of the benefits:

• Simple, fair, and transparent: With every hour plugged in, the bonus account is credited and can be viewed at any time. There is no minimum connection time. Every minute the BMW iX3 is connected counts, and additionally, the energy fed back into the grid is fairly compensated.
• Customer-centric: Customers retain full control and can set their charging goals to ensure their mobility needs are always met.
• No impairment of battery lifetime: Intelligent functions ensure that the high-voltage battery is always kept at an optimum level for its lifetime.
• Contribution to the energy transformation: The high-voltage batteries of the vehicles support the energy system during periods of surplus power or generation shortfalls. V2G promotes the use of renewable energies and reduces the long-term costs of the energy system.

Market launch and further strategic development

The technology for bidirectional charging will first be available on the market with the BMW iX3 and will gradually be introduced across additional BMW model ranges, thereby contributing to the scaling of V2G and its benefits for customers.

In the long term, the product is planned to be integrated into a comprehensive energy platform that intelligently connects charging infrastructure, photovoltaic systems, heat pumps, and smart home systems. The strategic partnership between BMW and E.ON lays the foundation for such an open, interoperable, and customer-centric ecosystem.

* This press release may contain forward-looking statements based on current assumptions and forecasts made by E.ON Group Management and other information currently available to E.ON. Various known and unknown risks, uncertainties, and other factors could lead to material differences between the actual future results, financial situation, development or performance of the company and the estimates given here. E.ON SE does not intend, and does not assume any liability whatsoever, to update  these forward-looking statements or to align them to future events or developments.

In the event of enquiries please contact:

BMW Group Corporate Communications

Bernhard Ederer

Communication Drive Technology, Driving Experience, Efficient Dynamics

Mobile: +49-176-601-28556

E-mail: Bernhard.Ederer@bmwgroup.com

Almut Stollberg

Head of Communication Innovation, Design, Technology, Digital Car

Mobile: +49-151-601-96543

E-mail: almut.stollberg@bmw.de

Munich. BMW Group Plant Steyr is getting ready for series production of fuel cell systems. The third generation of the BMW Group’s hydrogen drive system will be manufactured in Steyr from 2028, and the company’s competence centres in Munich and Steyr are already building the first prototypes. Further drive system components will come from the technology hub in Landshut.

“The launch of the first-ever fuel cell production model from BMW in 2028 will add another exceptionally efficient high-performance drive system with zero emissions to our technology-open product portfolio,” says Joachim Post, Member of the Board of Management of BMW AG, Development. “The choice of Steyr as the production location clearly demonstrates our commitment to a European innovation footprint. The BMW competence centres in Munich and Steyr have a key role to play in the development of pioneering fuel cell systems.”  

The third-generation BMW fuel cell system: more compact, more powerful, more efficient 

The first generation of the fuel cell drive system was supplied entirely by the Toyota Motor Corporation (Toyota) and was fitted in the BMW 535iA back in 2014. The second generation made its debut in the current BMW iX5 Hydrogen pilot fleet. This time, BMW developed the overall fuel cell system itself, while the individual fuel cells came from Toyota. 

For the new generation, the BMW Group and the Toyota Motor Corporation jointly develop the powertrain system for passenger vehicles, with the core fuel cell technology creating synergies for both commercial and passenger vehicle applications. This close collaboration enables both companies to leverage synergies in development and procurement while creating brand-specific models.

The third generation of fuel cell technology brings some major improvements:

• Compact design: The space taken up by the fuel cell system has been reduced by around 25%. A considerable increase in power density has enabled a much more compact construction compared to the preceding generation.  
• High degree of integration: The third generation can be seamlessly integrated into future vehicle architectures. This paves the way for a technology-open approach that will make it possible to offer customers a variety of drive system variants in future. 
• Optimised components and increased efficiency: The system is set to be substantially more efficient than its predecessor. This is being achieved by upgrading individual component parts that are based on the drive technology jointly developed with Toyota and by improved operating strategies. These advances result in increased range and output combined with lower energy consumption, which represents a significant improvement over the second generation. 

Technological expertise at the BMW Group in Munich

The BMW Group is making prototypes of the highly efficient fuel cell systems at the company’s competence centre for hydrogen in Munich. An electrochemical reaction takes place in the fuel cell, which involves hydrogen from the tanks reacting with oxygen from the air. This reaction produces electricity that powers the electric motor and thereby supplies the vehicle with energy. 

The fuel cell system comprises not only the fuel cells themselves, but also all the components and systems needed for their efficient operation. These include the cooling system and hydrogen- and air subsystems. The compact layout ensures the entire drivetrain delivers the levels of performance and safety for which BMW is renowned. 

Prototype production is currently focused on development and validation of the assembly and testing processes, with particular attention paid to industrialisation, quality assurance and scalability in the longer term. In parallel to this, the prototypes are being used to develop operating strategy and for validation on both a system and vehicle level. These steps are crucial in preparing fuel cell technology for series production. 

Series production at BMW Group Plant Steyr

Production of the fuel cell systems is due to get underway in 2028 at BMW Group Plant Steyr, which can call on decades of development and production expertise covering all drive system types across the BMW Group model range. New test rigs and production facilities are now being built and buildings modified to incorporate the new drive technology and constantly refine it. 

“We are proud to be producing another innovative drive technology at Plant Steyr in future alongside the latest generation of electric motors and combustion engines,” says Klaus von Moltke, Senior Vice President Engine Production at BMW AG and Director of BMW Group Plant Steyr. “This, together with the development expertise we have available on-site, makes our plant a prime example of the BMW Group’s technology-open approach.” 

Component manufacture at BMW Group Plant Landshut

BMW Group Plant Landshut is responsible for manufacturing key components for the fuel cell vehicles. Construction of new hardware and equipment for series production of the hydrogen-specific BMW Energy Master will start there in late May 2026. The BMW Energy Master controls the supply of power in the vehicle across a range from 400 – 800V. It also acts as the interface for data from the high-voltage battery. This control unit is supplemented by various components that are specifically required for the fuel cell application. Production of the first prototypes of the hydrogen-specific Energy Master will begin in mid-2026 just a few miles away at BMW Group Plant Dingolfing, where the prototypes of the BMW Energy Master for the Neue Klasse models were also made.  

As with the BMW iX5 Hydrogen pilot fleet, Plant Landshut will once again manufacture the housing and pressure plate for the next model generation. 

Munich. The high-voltage battery is a vital component of every electric vehicle. With the high-voltage batteries for the sixth generation (Gen6) of BMW eDrive, the BMW Group has made a big step in technology, delivering major improvements in energy density, charging speed and range. In readiness for series production, the BMW Group is currently building five assembly sites across three continents: in Irlbach-Straßkirchen (Lower Bavaria), Debrecen (Hungary), Shenyang (China), San Luis Potosí (Mexico) and Woodruff (USA). Before the series launch, production processes will be developed and tested at the BMW Group’s pilot plants for high-voltage batteries in Parsdorf and Hallbergmoos, and at the Research and Innovation Centre (FIZ) in Munich. As a data scientist andIT project manager, Patrick Zimmermann is responsible for implementing the Industrial Internet of Things (IIoT) and data analytics in the high-voltage battery production of the BMW Group. His role is to weave all relevant software strands together.

Patrick, what do you do as a data scientist and IT project manager in high-voltage battery production?

Patrick Zimmermann (PZ): I coordinate an interdisciplinary team that oversees the entire data processing chain: from data provision at the manufacturing facilities to edge applications that transfer our production data to the cloud and to analytics platforms.

What kind of expertise do you need for that?

PZ: First and foremost, the job requires a solid understanding of the technologies used to manufacture our high-voltage batteries. For this latest generation, which uses the new cylindrical round cells, we’ve developed a completely new production process. Of course, strong IT knowledge is also essential – with a clear focus on the software architectures behind the data analytics and artificial intelligence. Understanding the individual software modules and interfaces is crucial for choosing the right solutions for our production from the wide range of technologies and applications available.

This means you always have your finger on the pulse and can anticipate IT trends?

PZ: Data analytics and AI for production are evolving at a tremendous pace right now. That's why it’s important to keep an eye on new approaches and evaluate whether they’re suitable for BMW. Or whether they could even replace existing solutions – perhaps by offering lower costs or enhanced features. Not every analysis or AI solution that performs well in a particular industry or use case can be directly applied to battery production.

Production of Gen6 high-voltage batteries is groundbreaking for the BMW Group. What, in your opinion, makes this project unique?

PZ: One unique aspect is the end-to-end responsibility – from data provision and data transfer to the cloud, all the way through to selective and even continuous analyses. We process both numerical data and visual representations from the equipment. Throughout the process, we maintain a consistent zero-defect approach to producing our high-voltage batteries. Highly intelligent, AI-supported quality checks are integrated into the production process to help us achieve this. We rely on OPC UA interface technology for plant connectivity. This enables us to model standardised digital twins directly at our plants, eliminating the need for additional data processing. Data is transferred to the BMW Group's clouds, using the same data structure across all production sites. This allows us to roll out standardised analysis dashboards worldwide and, for example, implement process optimisations more rapidly. We’ve already established this IT architecture at our high-voltage battery pilot plants. We have now been able to transfer our analysis dashboards to the first series production plants with minimal effort.

Entire new plants and assembly halls are being built for production of the new Gen6 high-voltage batteries. Is this beneficial for the IT structure?

PZ: Absolutely! Building several plants for Gen6 high-voltage batteries on greenfield sites gives us a whole new level of design freedom. This allows for much bigger leaps in IT, compared to integrating new solutions into existing plants – a so-called brownfield. I, for one, find it really exciting to help shape the Industrial Internet of Things and data analytics on such a large scale right from the start.

Munich/Steyr (Austria). The BMW Group Plant Steyr today began series production of the e-engine for the Neue Klasse. “Today, we are laying the foundations for the future of the BMW Group,” explained Milan Nedeljković, member of the Board of Management of BMW AG responsible for Production. “As the first production site for the Gen6 electric engine, Plant Steyr is central to the Neue Klasse and the continued development of our global production network.” The electric engine for the sixth generation of BMW eDrive (Gen6) is the first fully-electric drive train to be produced at the Steyr location in Austria. From there, it will be shipped throughout the production network, providing the drive train for the Neue Klasse. “Three years ago, we announced that we would build this electric engine in Steyr. Today, we are proud to deliver it,” said Klaus von Moltke, SVP of Engine Production for BMW AG and plant director of the Steyr facility. “What we are launching here today is more than just a production ramp-up. It is a firm commitment to Europe, to technology and to the future.”

Technology openness: Plant Steyr as centre of drive train expertise

Between the project launch in 2022 and 2030, the BMW Group is investing over one billion euros in expanding development and production expertise for e-drives at the Steyr location. This capacity expansion will ensure the plant remains the BMW Group's leading location for drive trains. For over 40 years, the plant has developed and manufactured internal combustion engines for the BMW and MINI brands. This extensive experience and wealth of expertise in drive trains make the engine plant the ideal facility to produce the Gen6 electric engines. The site will continue to manufacture diesel and petrol engines in parallel. “Technology openness is our strength – it gives us the necessary flexibility to secure long-term jobs,” said von Moltke. Around 1,000 employees will work in the new electric engine assembly. Depending on global demand, half of the Steyr location’s total workforce could be employed in e-mobility by 2030. von Moltke: “Steyr will remain the heart of our drive train expertise – both for combustion engines and electromobility.”

Powertrain components produced in Steyr, aluminium housings from Landshut

Rotor, stator, transmission and inverter – all core components of the innovative, highly integrated e-drive – will be manufactured at Plant Steyr. The housing for the electric engine will be cast at Plant Landshut's aluminium foundry and further processed in Steyr. The inverter will be produced in a new in-house clean-room environment, marking the Austrian engine manufacturer’s entry into the field of electrical engineering. E-drive components from Steyr will be assembled on two new lines. The overall production concept for the Gen6 e-drive follows the principle of a modular system, making it possible to produce different highly flexible electric drive train derivatives for the entire range of Neue Klasse models. The modular concept generates positive economies of scale and cost savings in both development and production. It also improves the scalability of production volumes and keeps production, supply networks and procurement highly flexible.

Comprehensive improvements to electric engine

The electric engine has undergone significant further development for Gen6: The rotor, stator and inverter have all been holistically designed for the Gen6 technology’s new 800-volt architecture, maximising performance capabilities and the efficiency of the drive system. In the inverter, 800-volt technology and silicon carbide (SiC) semiconductor technology are now being used to boost efficiency. Fully integrated into the electric engine housing, the inverter converts direct current from the high-voltage battery into alternating current for the electric engine.

Lower weight, costs and energy loss lead to greater vehicle efficiency

Overall, the intelligent use of new technologies in the e-drive and systematic further development of existing systems produce remarkable results. Comparing the future BMW iX3 50 xDrive with a Gen5 xDrive model shows the following improvements in the electric engine: “Energy loss is reduced by 40 percent, costs by 20 percent and weight by 10 percent. All this makes a significant contribution to the approximately 20-percent increase in overall vehicle efficiency”, explains Martin Kaufmann, SVP of global Powertrain Development at BMW AG. The efficient design of the powertrain together with the high energy content of the high-voltage battery, enable a range of up to 800 km (WLTP) in the BMW iX3 50 xDrive, the first model of the Neue Klasse.

If you have any questions, please contact:

Corporate Communications

Christian Marxt
Spokesperson Production Network Powertrain and High-Voltage Batteries
Cell phone: +49-151-601-79158
Email: Christian.Marxt@bmwgroup.com

Sandra Schillmöller
Head of Communications Production Network BMW Group
Cell phone: +49-151-601-12225
Email: Sandra.Schillmoeller@bmwgroup.com

Media website: https://newsroom.bmwgroup.com/global/en
Email: presse@bmwgroup.com

A BMW iniciou esta semana a produção em série da nova geração de motores elétricos Gen6 eDrive, que irão equipar os próximos modelos NEUE KLASSE, marcando um novo capítulo na eletrificação do BMW Group.

Esta nova unidade motriz será estreada já no próximo BMW iX3, com apresentação mundial prevista para setembro deste ano. O motor será produzido na fábrica de Steyr, na Áustria – uma unidade de referência na produção de motores no BMW Group, agora adaptada também à eletrificação da gama da marca bávara.

Uma nova geração de eficiência e performance

O motor Gen6 foi desenvolvido com base numa arquitetura de 800V, garantindo ganhos significativos face à geração anterior:

• Redução de perdas energéticas em cerca de 40%

• Peso total reduzido em 10%

• Redução de custos em 20%

• Autonomia até 800 km, trabalhando em conjunto com as novas baterias (autonomia estimada do futuro BMW iX3, sujeita a confirmação WLTP)

A caminho do futuro elétrico do BMW Group

A fábrica de Steyr, histórica unidade de produção do grupo, acolhe agora a montagem de motores elétricos, com mais de 1.000 colaboradores dedicados à nova linha de produção. A expetativa do BMW Group é que, até 2030, metade da força de trabalho da unidade esteja afeta exclusivamente à mobilidade elétrica 

Rosslyn, Tshwane. BMW Group South Africa marked a notable milestone, hosting key national leadership, including the President of the Republic of South Africa, Cyril Ramaphosa, accompanied by the Premier of Gauteng Province, Panyaza Lesufi, at BMW Group Plant Rosslyn on Thursday, 24 July.

The landmark visit, which saw the participation of Milan Nedeljković, Chairman of BMW South Africa and Member of the Board of Management of BMW AG, responsible for Production, and Ilka Horstmeier, Labour Relations Director and Member of the Board of Management of BMW AG, responsible for People and Real Estate, as part of their broader engagements in South Africa, highlighted the strong and active partnership between the BMW Group and the South African government in advancing industrial growth and economic empowerment.

“The achievements at BMW Group Plant Rosslyn, especially its path towards record production volumes and its crucial role in our global BMW X3 production, are a source of great pride”, comments Milan Nedeljković. “Our significant investment in electrification here demonstrates our long-term belief in South Africa as a key manufacturing hub within our global network, driving innovation, skills and sustainable growth for the region.”

Showcasing local excellence and commitment. 

The visit provided a valuable opportunity to spotlight BMW Group South Africa’s recent successes and plans. BMW Group Plant Rosslyn is set to achieve its highest annual production volume in 52 years, reflecting strong global demand and the BMW Group’s confidence in local manufacturing capabilities. This performance is underpinned by continuous investment, notably the R4.2 billion allocated for the electrification of BMW Group Plant Rosslyn. The locally produced BMW X3 recently earned critical acclaim, winning the Old Mutual Insure 2025 South African Car of the Year and the Premium category awards, highlighting its strength and market appeal. BMW Group South Africa’s strong Q2 performance indicates its leadership in the premium segment, with customer demand and its electrification strategy continuing to drive production of the new BMW X3 at BMW Group Plant Rosslyn. To date, Plant Rosslyn is the only plant that produces the BMW X3 plug-in hybrid (PHEV) for the entire world; a fact that the team of BMW Group Plant Rosslyn takes pride in.

Advancing South Africa’s automotive sector, together.

The engagement at BMW Group Plant Rosslyn served as a pivotal platform to reinforce the company’s position as a trusted corporate citizen and contributor to national progress. During the visit, President Ramaphosa interacted with the plant assembly staff on the production line, gaining firsthand insight into daily operations, and later addressed several hundred production staff, acknowledging their dedication. Discussions during the visit highlighted BMW Group South Africa’s industry leadership, showcasing its role as a premium automotive manufacturer through innovative and sustainable practices, and emphasising its substantial investment in South Africa’s economic development.

The dialogue focused on the tangible benefits of BMW Group Plant Rosslyn, specifically its role in advancing job creation, driving essential skills development, and facilitating technology transfer within the local market. A reflection of its ongoing dedication to national transformation, BMW Group South Africa  and BMW Group Financial Services South Africa both achieved Level 1 B-BBEE status in the 2024 audit, highlighting the companies’ drive towards an inclusive and equitable workplace, and reflecting continuous, focused efforts and collaboration. Crucially, the visit has strengthened public and private sector relations, deepening BMW Group South Africa’s partnership with the local government and aligning its strategic goals with the President’s vision for industrial growth, economic empowerment and sustainable mobility.

“This engagement at Plant Rosslyn reaffirms the great partnership between the BMW Group and South Africa”, states Daniel Bester, Director of BMW Group Plant Rosslyn. “Our plant continues to be a beacon of manufacturing excellence, setting new production records and driving innovation. We remain committed to contributing to South Africa’s economic growth, actively working towards a shared, prosperous future.”

Beyond manufacturing, BMW Group South Africa’s partnership with the Youth Employment Services (YES) programme continues to create meaningful work opportunities for young South Africans, equipping them with practical experience. The company has generated over 3,500 youth work experiences since 2022. The 2025 cohort at BMW South Africa includes 86 talented individuals gaining invaluable experience across the four business entities.

Creating confidence for a shared future.

The successful gathering at BMW Group Plant Rosslyn solidifies BMW Group South Africa’s industrial leadership and its function as an integral collaborator in South Africa’s economic growth and enduring prosperity. A key pillar supporting this confidence is the company’s highly adaptive and capable manufacturing workforce. The advanced requirements for producing the new BMW X3 at BMW Group Plant Rosslyn have driven significant advancements in employee technical skills and expertise. This continuous development of local capabilities not only upholds manufacturing excellence but also reinforces South Africa’s strategic importance within the global automotive industry.

Munich/Parsdorf. With the Neue Klasse, the BMW Group is ushering in a new era of pure electric driving, starting series production end of 2025. The high-voltage battery is a key component in any electric vehicle. Before large-scale series production can begin, manufacturing processes must be developed and pre-series batteries put through their paces. This takes place at the BMW Group’s pilot plants for high-voltage batteries in Parsdorf and Hallbergmoos and at the Research and Innovation Centre (FIZ) in Munich. “Our pilot plants for high-voltage batteries are strengthening Germany’s capacity for innovation,” says Milan Nedeljković, Member of the Board of Management of BMW AG responsible for Production. “They are laying the groundwork for the new series plants worldwide, ensuring a smooth ramp-up of high-voltage battery production.” To produce high-voltage batteries for the sixth generation of BMW eDrive (Gen6), the company is establishing five assembly sites across three continents: in Irlbach-Straßkirchen (Lower Bavaria), Debrecen (Hungary), Shenyang (China), San Luis Potosí (Mexico) and Woodruff (USA).

Quality is key: Consistent zero-defect approach
For the in-house developed Gen6 high-voltage battery, the BMW Group is implementing intelligent, state-of-the-art production processes using the latest technologies. “For production of our high-voltage batteries, we are pursuing a consistent zero-defect approach,” explains Markus Fallböhmer, head of Battery Production at BMW AG. “Highly intelligent, AI-supported quality checks are integrated into the production process to help us achieve this.” Because quality is key: In bodies for the Neue Klasse, the high-voltage battery serves as a structural component (“pack to open body”). The new cylindrical round cells are integrated directly into the high-voltage battery (“cell to pack”). With its innovative production processes, BMW Group’s pilot and series plants are setting new industry standards for battery production. Examples include, among the consistent zero-defect approach, the use of digital production twins for tasks such as employee training, as well as leveraging expanded AI databases to optimise supply and production logistics. All production steps undergo seamless in-line monitoring with comprehensive data storage, enabling maximum process stability and continuous data-based optimisation.

Pilot plants up close: Parsdorf, Hallbergmoos and Munich (FIZ)
The largest pilot plant for Gen6 high-voltage batteries is located in Parsdorf, where over 350 employees have been building initial prototypes since 2023. Since mid-2024, some of the high-voltage batteries produced there have already been delivered to the vehicle plant in Debrecen, Hungary, where they are installed in test vehicles for the Neue Klasse. A pre-series plant for high-voltage batteries is also located near Munich Airport. Since summer 2024, the site in Hallbergmoos has been developing manufacturing technologies for high-voltage battery assembly. Around 200 employees are working at this small-scale battery factory. The Hallbergmoos site serves as a model for the series production at Plant Woodruff near Spartanburg, South Carolina, US. At the Munich Research and Innovation Centre (FIZ), another 200 employees are manufacturing and testing prototypes and smaller module variants of the high-voltage battery. Several floors of the recently opened Aeroacoustics and E-drive Centre (AEZ) are dedicated to this work.

Series launch of five battery plants in under two years
The systems and processes developed at the Bavarian pilot plants will be rolled out to the series plants worldwide. Within less than two years, series production will ramp up at five locations across three continents. In line with its "local-for-local" principle, the BMW Group has positioned its Gen6 high-voltage battery assembly sites as close as possible to its vehicle plants. This approach safeguards production, even in the event of unforeseen political and economic developments. It will also strengthen existing production sites, while preserving and creating jobs. Series production of the BMW iX3, the first model of the Neue Klasse, will get underway at Plant Debrecen late this year, alongside high-voltage battery manufacturing at the same site. The launch in Debrecen will be followed by the battery assembly plants in Shenyang, Irlbach-Straßkirchen, Woodruff and San Luis Potosí.

How the BMW Group builds Gen6 high-voltage batteries
The BMW Group sources battery cells for its high-voltage batteries from leading cell manufacturers, who produce the cells to the company's specifications. The highest technical standards apply. Upon receipt of goods, additional measurements – such as voltage checks – are carried out. Next comes cell clustering, where the battery cells are connected to coolants. This step ensures optimal insulation and cooling of the cells. The cell clusters and cell contact system are then laser-cleaned and welded with pinpoint precision. The in-line inspection continuously monitors each weld seam in real time. An innovative foaming process follows, ensuring that all elements are protected as a mechanical unit. The foam thus guarantees the safety, stability and durability of the high-voltage battery. The housing is then closed, sealed and riveted. In the final assembly step, the Energy Master – the central control unit – is installed onto the high-voltage battery. A permanently elastic sealing adhesive is applied to ensure a reliable seal. Finally, each high-voltage battery undergoes a 100% end-of-line inspection to ensure quality, safety and function.


If you have any questions, please contact:

Corporate Communications

Christian Marxt
Press spokesperson, Production Network, Powertrain and High-Voltage Batteries
Cell phone: +49-151-601-79158
Email: Christian.Marxt@bmwgroup.com

Sandra Schillmöller
Head of Communications Production Network BMW Group
Cell phone: +49-151-601-12225
Email: Sandra.Schillmoeller@bmwgroup.com

Media website: https://newsroom.bmwgroup.com/global/en
Email: presse@bmwgroup.com

Munich. As it pulls back the curtain on a new era in 2025, fuelled by the all-electric Neue Klasse models, BMW is creating a holistic driving and user experience that breaks genuinely new ground. One of the elements of the far-reaching BMW Panoramic iDrive concept is the new HypersonX soundscape. Developed by the BMW Group Sound Design Studio, it comprises 43 sound signals and special driving sounds for Personal Mode and Sport Mode. The multi-dimensional spectrum adapts the sounds precisely to the driving situation at hand and, in so doing, creates an emotional interaction between the driver and their vehicle.

This new stage in the evolution of the automotive sound experience has been made possible by the technological advances in hardware and software brought by the Neue Klasse. The revolutionary BMW Operating System X and a newly developed control unit pave the way for an innovative audio architecture. This allows the overall experience offered by the Neue Klasse to be perfected at an acoustic level, as well as in terms of vehicle character, driving experience and functional range.

A new dimension in drive sounds: distinctive and precisely honed.

“The unique sound spectrum of HypersonX plays a major role in giving a Neue Klasse model its own, highly distinctive character acoustically. Through our focus on precision, warmth and lightness, we can create a direct emotional connection between the driver and their vehicle,” emphasises Renzo Vitale, Creative Director of Sound Design BMW Group. In both Personal Mode and Sport Mode, the drive sounds focus on the essentials and are inspired by tones from nature and structures from the worlds of art and science. HypersonX has fewer basic notes than the sound experience previously employed. But at the same time, the acoustic spectrum has grown to include a new dimensional level. This gives the sound more “colour”, depth and precision, and it embodies more than ever the pleasure of driving for which BMW is renowned.

One of the main elements underpinning this capability is the audio control unit developed for the Neue Klasse, which enables a significant expansion of the dynamic range.

Added to which, the spatial modulation of the drive sound achievable in the Neue Klasse ensures that the vehicle occupants are thoroughly immersed in the soundscape generated by HypersonX. Under acceleration, for example, the vehicle gives the impression of moving between different three-dimensional layers of sound, thus transporting the feeling of speed and BMW-typical driving dynamics authentically into the cabin.

Humanity is a central design element of the welcome sound.

As well as intelligent reduction to the essential elements, the human aspect played an important role in the development of the soundscape for the Neue Klasse. The middle and lower frequency ranges of the BMW HypersonX sound spectrum have been brought to the fore to create a well-balanced acoustic ambience. In conjunction with intuitive operation, precisely adjusted light effects and homely interior design, this gives those on board a fine sense of wellbeing.

A choir made up of BMW Group Design Studio employees brings voice – in their respective native languages – to moments of driving joy, infusing the welcome sound with a particularly empathetic flavour. Carefully isolated elements of these recordings enhance the overall composition of the welcome sound to excellent effect and treat the driver to moments of joy and human warmth.

BMW HypersonX gives the sounds for the Neue Klasse an expressive and distinctive, but also understated and sensitive feel. To this end, more than nine million sound instances based on BMW’s sound DNA were generated using a new algorithm. At the BMW Group Sound Design Studio, these were then filtered into a brand-typical essence that in turn generates a cohesive and multi-dimensional acoustic experience. The result is a sound that creates an emotional connection between human and vehicle in all driving situations and brings a positive, congenial and inviting aura to the acoustic presence of the Neue Klasse.

Munich/Landshut. The BMW Group is presenting its next leap forward in the field of electric drive technology – and in the process ushering in a new era of all-electric driving. At the Tech Days event in Landshut, the company has provided some initial insights into the development and production of high-voltage batteries and electric drive systems using the sixth generation of BMW eDrive technology. Every fully electric Neue Klasse vehicle will enjoy the benefits. The first Neue Klasse model will go into series production later this year at Plant Debrecen in Hungary. Below is an overview of the technology highlights:

• The Energy Master intelligent central control unit on the high-voltage battery – developed by the BMW Group and produced at Plant Landshut.
• A new high-voltage battery concept that, together with the BMW cylindrical cell, promises to bring about a technological quantum leap – including significant improvements in energy density, charging speed and range.
• The BMW Group also demonstrates its technology-openness with electric drive systems – through the use of different electric motor types: SSM and ASM.
• A modular approach to electric motor production gives the BMW Group an exceptional degree of flexibility.
• The BMW Group pools together expertise from the entire electric mobility value chain in Bavaria and Austria – from development, via purchasing and production, to recycling.
• The BMW Group demonstrates both technology-openness and full expertise across all areas of electric mobility.

Adopting a technology-open approach while setting the pace in electric mobility

“For the BMW Group, electric mobility is the future and a key area of growth. We are leading the way with this drivetrain technology. At the same time, we are deliberately taking a technology-open approach, recognizing that mobility needs vary between different regions of the world,” explains Dr Joachim Post, Member of the Board of Management of BMW AG, Purchasing and Supplier Network. “We want to offer our customers the best drive concept for every need. It is possible to do both: offer the best drive technology for every need and be at the forefront of electric mobility.”

Slimmer, faster, further: the high-voltage batteries for Gen6

With the new sixth-generation BMW eDrive technology (Gen6 for short), the BMW Group is making a technological quantum leap. Improvements on the product side include a 30% faster charging speed and 30% increase in range, with certain models achieving even higher figures. Added to which, the Gen6 high-voltage battery concept benefits from the new 800V technology. Gen6 will make its debut this year in the Neue Klasse and subsequently be used to drive models across the BMW Group’s fully electric product range. The concept for the Gen6 high-voltage batteries is fundamentally new and will find applications in all vehicle segments – right up to the high-performance models from BMW M GmbH. Its new, even slimmer design allows the high-voltage battery to be integrated into a spread of different models, regardless of vehicle height. The high-voltage battery takes on the role of a structural component in the bodies of the Neue Klasse models (“pack-to-open-body”), and the new cylindrical cells will be integrated directly into the high-voltage battery (“cell-to-pack”). The new BMW cylindrical cell has a 20% greater energy density than its predecessor, the Gen5 prismatic battery cell. And charging in both directions will be possible: the BMW Group has confirmed bidirectional charging as standard for Gen6.

Highly intelligent central control unit: the BMW Energy Master

All of the elements that enable this technological leap forward come together in the BMW Energy Master. This central control unit is positioned on the high-voltage battery and provides the interface for high- and low-voltage power supply and for data from the high-voltage battery. It also controls the power supply for the electric motor and vehicle electrical system and ensures the safe and intelligent operation of the high-voltage battery. The BMW Group has filed a whole series of new patent applications for the vehicle electrical system, including its electronic fuses. Both the hardware and software of the Energy Master were developed fully in-house at the BMW Group. This ensures technological developments and updates for vehicles can be implemented independently and in real time via Remote Software Upgrades, providing a particular benefit for customers.

“Local for local” approach for high-voltage battery assembly and supplier network

The high-voltage batteries for the Neue Klasse are assembled in five new production facilities that the BMW Group has located close to its vehicle plants as part of a “local for local” approach. For example, cutting-edge assembly locations for Gen6 high-voltage batteries are taking shape in Irlbach-Straßkirchen (Lower Bavaria), Debrecen (Hungary), Shenyang (China), San Luis Potosí (Mexico) and Woodruff, near Spartanburg (USA). This approach safeguards production even in the event of unforeseen political and economic events. In addition, the existing locations are being strengthened, with jobs both secured and created. The “local for local” principle continues in the supplier network for battery cells: in order to cover the demand for Gen6, the BMW Group has reached contractual agreements for five battery cell factories – spread across Europe, China and the USA – with various partners.

“Cell-to-pack” and “pack-to-open-body”

Production of the Gen6 high-voltage batteries follows the “cell-to-pack” and “pack-to-open-body” principles. “Cell-to-pack” involves positioning the cylindrical cells – manufactured by the suppliers according to BMW Group specifications – directly in the housing of the high-voltage battery, without the intermediate step of a module being produced. “Pack-to-open-body” refers to the high-voltage battery’s new role as a structural component in the vehicle architecture. Numerous innovations patented by the BMW Group can be found here.

Know-how from Bavaria and Austria – in demand around the world

Before series production of the high-voltage batteries gets underway worldwide, the production processes will be developed and pre-series batteries subjected to thorough testing. This will happen at the BMW Group pilot plants for high-voltage batteries in Parsdorf, Hallbergmoos and Munich. The new series production plants around the world will then be ready. The product and process expertise is centred in Bavaria. Production of the Energy Master will take place at Plant Landshut, which will then supply all the high-voltage battery assembly plants around the world. There, the highly intelligent control unit will be installed on the high-voltage battery. The electric motor with sixth-generation BMW eDrive technology is produced at Plant Steyr in Austria, which is also home to a development centre for electric drive systems and thermal management.

Production of the Energy Master at BMW Group Plant Landshut  

A state-of-the-art production system for the BMW Energy Master is taking shape at Plant Landshut. The plant is currently producing the highly complex control unit in pre-series. Series production on the first production line will begin in August 2025, with a further expansion stage to follow in mid-2026. This is the first time the development and production of this central control unit has taken place in-house at the BMW Group. “As the company’s largest in-house component manufacturer, Landshut plays an important role for the Neue Klasse,” says Dr Joachim Post. “The plant is an innovation hub and a driver of transformation.” Around 200 people will be employed in the Energy Master production area at Landshut when production begins, rising to as many as 700 people as it ramps up further. The BMW Group has channelled investment in the high hundreds of millions of euros into the expansion of electric mobility at Plant Landshut since 2020, strengthening both the production facility itself and Germany’s status as an industrial powerhouse for the long term. The modular manufacturing system used to produce the Energy Master was also designed fully in-house by the BMW Group. It is supplied with subcomponents by a supply chain set up by the BMW Group. This extends to the n-tier supply chain for supply-critical components such as semiconductors. The benefits of this set-up can be seen in terms of both costs and supply security. The scalable production system enables the company to respond quickly and flexibly to market requirements. The high degree of automation, involving up to 400 robots in the final expansion stage, maximises efficiency. Comprehensive in-process monitoring, which includes the use of AI-based camera systems, and 100-per-cent end-of-line system checks in a clean-room environment ensure optimum quality.

Different recycling processes within the value chain

As electric mobility ramps up, there is an increasing focus on recycling of high-voltage batteries at the end of their lifecycle. Under a long-term partnership with SK tes – a leading provider of innovative technology lifecycle solutions – cobalt, nickel and lithium from end-of-life batteries are recovered from the BMW Group and integrated into the supply chain for the manufacture of new batteries. This closed-loop approach increases the efficiency and resilience of the BMW Group as part of a circular economy. The BMW Group will follow a similar path in the USA, Mexico and Canada up to 2026 with a separate partnership.

Innovative direct recycling at the BMW Group

The BMW Group is also exploring other recycling options in the value creation process. One example of this is the direct recycling method developed in-house. The BMW Group is working with its joint venture Encory to set up a competence centre for battery cell recycling in Lower Bavaria, where the company will put its direct recycling ideas into practice. This innovative process will enable residual materials from battery cell production and whole battery cells to be mechanically broken down into their valuable constituent components. The raw materials obtained in this way will be re-used directly in the pilot production process for battery cells at the company’s competence centres.

Technology-open approach for electric mobility: the new e-drive system of Gen6

The BMW Group has retained the principle of an electrically excited synchronous motor (EESM) for its Gen6 power unit. On this type of synchronous motor, the magnetic field in the rotor is generated by windings fed with direct current rather than permanent magnets. In this way, the strength of the rotor’s magnetic field can be optimally adjusted to the prevailing load conditions. This results in both excellent levels of efficiency at customer-relevant operating points and constant power output at high rotational speeds. As with the Gen5 version, the synchronous motor will be positioned above the rear axle and feature a compact housing incorporating the electric drive unit, power electronics and transmission. Many of the motor’s technical details were created with the help of patented expertise, with the non-potted rotor alone accounting for more than ten patent applications.

Neue Klasse additionally incorporates ASM technology

The Gen6 powertrain employs a second, additional electric motor technology in the form of the asynchronous motor (ASM). Here, instead of being generated by permanent magnets (PSM) or electrical excitation (EESM), the rotor’s magnetic field is induced by the stator. On this type of motor, the rotor takes the form of a metal cage. The asynchronous motor offers the advantage of a more compact design and superior cost efficiency. The ASM motor variants will be fitted at the front axle of Neue Klasse cars with BMW xDrive.

Extensive improvements to EESM technology

Besides the addition of ASM technology, the EESM technology has also undergone a major upgrade for Gen6: rotor, stator and inverter have all been fully designed for the new 800V architecture of the Gen6 tech in order to maximise drive system performance and efficiency. This has been further helped by a complete redesign of the oil and water cooling systems. In addition to this, the experts from the BMW Group have also succeeded in improving the electric motor and central housing in terms of their weight and rigidity too. The transmission still uses a two-stage helical design, but has been further optimised by enhancements to its geometry and cooling, lower friction levels and more pleasant acoustics. The electrically excited synchronous motor’s “brain”, the inverter, now features 800V technology along with silicon carbide (SiC) semiconductors to boost efficiency. The inverter is completely integrated into the electric motor’s housing. Its task is to convert the DC power supply from the high-voltage battery to AC for use in the electric motor. The inverter was developed in-house by the BMW Group and is produced at Plant Steyr in Austria.

Lower weight, costs and energy losses – greater efficiency in the vehicle

The results obtained from intelligently incorporating new technologies into the electric powertrain while consistently enhancing existing systems make impressive reading. When compared to a Gen5 xDrive model, a future Neue Klasse model complete with EESM and ASM technology boasts the following improvements: energy losses have been reduced by 40%, costs by 20% and weight by 10%. By combining different types of electric motor, the BMW Group’s technology-open approach is therefore clearly in evidence within the field of electric mobility. In future, customers will be able to choose from models equipped with one, two, three or four electric motors to suit their individual preferences and requirements. The sixth generation BMW eDrive technology is a significant factor in the gain in overall vehicle efficiency of around 20 per cent for the Neue Klasse. This figure is based on a comparison with the current generation of all-electric vehicles from the BMW Group.

Modular concept provides crucial advantage for manufacturing electric motors

The manufacturing concept for the Gen6 electric drive system uses the principle of modular building blocks. This forms the basis for highly flexible manufacturing of various electric drive variants across the entire Neue Klasse model range. The modular "building block” concept leads to positive economies of scale and cost savings in development and production. It also has the effect of improving the scalability of production volumes. The modular approach ensures a high degree of flexibility in production, the supply networks and procurement.

The Gen6 electric drive systems: made in Steyr

Series production of the Gen6 electric drive systems will commence at BMW Group Plant Steyr in summer 2025. Pre-production already got underway at the Austrian facility in September 2024. The pre-production motors are undergoing rigorous testing and some are already being fitted in Neue Klasse test vehicles from Plant Debrecen. By 2030, the BMW Group will have invested over one billion euros at the site since the project’s launch in 2022 to expand its development and production expertise for electric drive systems. Thanks to the increase in capacity, the plant will retain its status as the BMW Group’s leading facility for drive systems. The plant has been developing and building combustion engines for the BMW and MINI brands for over 40 years. Plant Steyr’s many years of experience and high level of expertise in the field of drive systems make it the ideal site for manufacturing the Gen6 electric motors. It has an annual production capacity of 600,000 electric drive units. Diesel and petrol engines continue to be manufactured there alongside the electric motors. By 2030, around half of the on-site employees should be working in electric mobility – a vital step for safeguarding the more than 4,700 jobs at the plant in the long term. In future, all key components of the innovative, highly integrated electric drive unit – i.e. the rotor, stator, transmission, inverter and housing – will be produced at Steyr. This will include manufacturing the inverters in an in-house clean room environment for the first time, thereby taking the engine plant into the realm of electrical engineering. The electric drive components will be built on two new assembly lines at Steyr.

Thermal management: complex interaction, crucial for performance
Thermal management involves highly complex interaction between various systems in an electric vehicle and is of critical importance for a host of performance parameters, including range, real-world consumption, acceleration and charging time. Thermal management is a question of constantly keeping the temperature of the electric motor, power electronics and high-voltage battery in the optimum range, while maintaining standards of passenger comfort at the same time. Efficient thermal management is important for fast charging too. Here, the battery temperature must be kept within a defined window in order to make optimum use of the available charging capacity. Unlike combustion engines, electric motors give off little heat. This means that, depending on the operating state, the battery and the passenger cell have to be not only cooled, but heated too. The Steyr site develops the thermal management systems for all electric vehicles from the BMW Group. The plant’s development centre is also responsible for the brain at the heart of the electric motor – the inverter.

BMW Group Plant Landshut – a multi-talented component manufacturer

BMW Group Plant Landshut is the BMW Group’s largest component plant anywhere in the world, supplying components to all the company’s vehicle and drive system plants. Its workforce of around 3,700 employees produces a broad spectrum of cutting-edge components for vehicles from the BMW Group. Working closely with the BMW Group’s Research and Innovation Centre (FIZ) in Munich, Plant Landshut plays a pivotal role as a hub of innovation for the automotive industry. It develops pioneering technologies and manufacturing processes that serve to maintain the company’s competitive edge. Over the course of the Neue Klasse project, the site is investing some €200 million in its light metal foundry to increase annual production capacity for the electric motor housings. The Injector Casting (ICA) process developed and patented in Landshut is a prime example of the plant’s innovative strength. This globally unique process is used to manufacture the electric motors’ highly complex aluminium housings that set new standards for lightweight design and functional integration.

In the event of enquiries please contact:

Corporate Communications

Christian Marxt

Spokesperson Production Network, Powertrain and High-voltage Batteries

Mobile: +49-151-601-79158

E-mail: Christian.Marxt@bmwgroup.com

Carolin Seidel

Spokesperson BMW Group Plant Landshut

Mobile: +49-151-601-90340

E-mail: Carolin.Seidel@bmwgroup.com

Florian Moser

Team Lead Purchasing and Supplier Network, Spokesperson Dr Joachim Post

Mobile: +49-151-601-62847

E-mail: Florian.Moser@bmwgroup.com

Bernhard Ederer

Spokesperson Drive Technology, Battery, Charging, Efficient Dynamics

Mobile: +49-176-601-28556

E-mail: Bernhard.Ederer@bmwgroup.com

Diana Schaidnagel

Spokesperson Sustainability

Mobile: +49-151-601-38407

E-mail: Diana.Schaidnagel@bmw.de

The BMW Group

With its four brands BMW, MINI, Rolls-Royce and BMW Motorrad, the BMW Group is the world’s leading premium manufacturer of automobiles and motorcycles and also provides premium financial services. The BMW Group production network comprises over 30 production sites worldwide; the company has a global sales network in more than 140 countries.

In 2024, the BMW Group sold 2.45 million passenger vehicles and more than 210,000 motorcycles worldwide. The profit before tax in the financial year 2023 was € 17.1 billion on revenues amounting to € 155.5 billion. As of 31 December 2023, the BMW Group had a workforce of 154,950 employees.

The economic success of the BMW Group has always been based on long-term thinking and responsible action. Sustainability is a key element of the BMW Group’s corporate strategy and covers all products from the supply chain and production to the end of their useful life.

O BMW Panoramic iDrive será uma das principais inovações tecnológicas da futura geração de modelos Neue Klasse, sublinhando o compromisso do BMW Group em definir os padrões de mobilidade do futuro.

Panoramic Vision: Um novo nível de conectividade e interação

O elemento central deste sistema é o BMW Panoramic Vision, um ecrã widescreen inovador que se encontra posicionado em toda a largura do pára-brisas, oferecendo informações e funcionalidades essenciais ao condutor, de uma forma intuitiva e personalizada. A projeção de conteúdos do ecrã é realizada diretamente na linha de visão do condutor e do passageiro da frente, melhorando a segurança e a acessibilidade.

Através da tecnologia de realidade aumentada e da sua integração com o ecossistema BMW, o Panoramic iDrive garante que os condutores tenham sempre acesso à informação mais relevante, desde dados de navegação a funções de entretenimento, sem distrações.

Tecnologia sustentável e focada no Futuro

Os modelos Neue Klasse, onde o Panoramic iDrive será implementado, destacam-se também pela sustentabilidade e inovação. Desde a otimização dos processos de fabrico até à eficiência energética e uso de materiais recicláveis, o BMW Group reforça o seu compromisso com a mobilidade sustentável.

Inspiração na experiência do cliente

O novo sistema foi desenvolvido com base em feedback direto dos clientes, refletindo a abordagem centrada no utilizador que caracteriza o BMW Group. “Com o Panoramic iDrive, estamos a redefinir a experiência de condução digital, oferecendo uma interação mais imersiva e intuitiva,” afirmou Frank Weber, membro do Conselho de Administração da BMW AG.

Disponibilidade

O BMW Panoramic iDrive estará disponível[JC1] na próxima geração de veículos Neue Klasse, com lançamento previsto para 2025. Este novo conceito promete transformar o futuro da condução, posicionando o BMW Group como líder na inovação e redefinição da mobilidade premium.

Munich/Las Vegas. The BMW Group presents the driving and user experience of the future at the Consumer Electronics Show (CES) 2025 in Las Vegas. BMW is providing the first opportunity to experience the close-to-production version of the new BMW iDrive – complete with its centrepiece, BMW Panoramic Vision – at the event. The software underpinning it all is the new BMW Operating System X, which acts as the intelligence hub behind the new display and operating concept. The holistic system, with its modern, style-shaping design, will be introduced in all new BMW models from the end of 2025.
“High tech meets highly intuitive operation – a quarter of a century of pioneering work and technological leadership in operating concepts has been channelled into the new BMW Panoramic iDrive,” says Frank Weber, member of the Board of Management of BMW AG, responsible for Development.
“The foundations are provided by the new BMW Operating System X. With this advance, we are giving one of the world’s best and most comprehensive infotainment systems even greater capability and once again setting the industry benchmark in multimodal interaction. Starting with the first series-produced Neue Klasse model at the end of this year, the new BMW Panoramic iDrive will form an integral part of all future BMW models.” 

Four elements, one goal: consistent driver focus in characteristic BMW style.
The new BMW iDrive merges four central elements into a unique display and operating concept.

• BMW Panoramic Vision – a Head-Up Display concept newly developed by BMW for projecting content – reflects visible information from A-pillar to A-pillar onto a black printed surface in the lower section of the windscreen. This information is visible to all occupants.
  The most important driving information is projected directly into the driver's line of sight on the left-hand side of the BMW Panoramic Vision (in left-hand-drive cars), above the steering wheel. The driver can personalise the content in the central and right-hand areas of the BMW Panoramic Vision via the central display. The integration of the BMW Panoramic Vision creates a 3D effect for the driver and passengers.
• The new and optional BMW 3D Head-Up Display above the BMW Panoramic Vision now shows integrated navigation and automated driving information directly in the driver’s field of vision. The content in the BMW Panoramic Vision and BMW 3D Head-Up Display is presented in a neatly coordinated way.
  The level of innovation achieved by the two Head-Up display technologies is underlined by several patent applications from the BMW Group resulting from the development of these projection technologies.
• On the central display with matrix backlight technology, the familiar, updated menu structure with QuickSelect ensures optimal operation of the functions and content by touch. Operation is very easy and convenient, as the free-cut-design display is located close to the steering wheel in an ergonomically ideal position. Selected content (widgets) can be carried over to the BMW Panoramic Vision with a swipe on the central display. As many as six widgets are possible and they can be arranged as desired in the BMW Panoramic Vision.
• The new multifunction steering wheel uses BMW’s shy-tech approach, whereby the relevant buttons are illuminated to highlight available functions. The steering wheel serves as the primary physical control, and its buttons provide active haptic feedback. The buttons have a well-judged, relief-like surface, which makes them extremely easy to locate and means the driver can press them without needing to divert their gaze away from the road.
  The arrangement of the buttons follows the familiar principle of driver assistance functions being positioned on the left-hand side of the steering wheel and content-controlling functions on the right-hand side.
  
  

The combination of these four elements re-interprets BMW’s customary “hands on the wheel, eyes on the road” approach, with which BMW sets the benchmark for driver focus and presents a unique form of intuitive, use-friendly and ergonomically optimised operation. The BMW Panoramic iDrive always gives the driver the right information in the right place and at the right time. The system continues the approach of using an optimal combination of analogue and digital controls through the use of switches, buttons, touch and voice control. There are haptic switches for the windscreen wipers, turn signal indicators, exterior mirrors, volume control, gear selectors and window de-icers. Other functions are optimised for operation using touch/voice control or via the multifunction steering wheel, such as telephone functions, media control systems, navigation, assisted driving, personalisation of displays, selection of MyModes and much more besides.

Alongside data-driven learnings on the use of BMW Operating Systems across the global fleet of now more than 22 million connected BMW vehicles, the development phase of the new BMW Panoramic iDrive also included numerous studies conducted in the BMW Group’s usability labs, in which around 3,000 customers were involved. Every decision on the various aspects of the operating logic is therefore based on data and made in a structured manner. Here, the user experience’s extended scope for personalisation has also been aligned with customer preferences and requirements.

BMW Operating System X: intelligent, versatile, fit for the future.
The new BMW Operating System X represents an update of the latest operating system, as used in many BMW models, and is a wholly in-house development from BMW. Like BMW Operating System 9, it is based on an Android Open Source Project (AOSP) software stack. It offers even greater update and upgrade capability than the predecessor system, making it both fit for the future and backwards compatible. It is ready to accommodate additional functions and will keep vehicles equipped with the new BMW Panoramic iDrive at the cutting edge of technology over a long period of time.
“The overall concept of the new BMW Panoramic iDrive with Operating System X has been enabled by a large technological leap forward,” says Stephan Durach Senior Vice President Connected Company BMW Group. “It offers intuitive operation, emotionally engaging experiences and specific personalisation. The new BMW iDrive with Operating System X demonstrates the potential of a software-defined vehicle.”

The expanded intelligence of BMW Operating System X makes it possible to combine the BMW Panoramic Vision, optional BMW 3D Head-Up Display, central display and multifunction steering wheel with one another in such a way that physical and digital experiences merge. For example, an incoming call initially brings up a graphic on the BMW Panoramic Vision. At the same time, a symbol on the relevant steering wheel button that was not previously visible is illuminated in green, indicating the option of taking the call by pressing the button or rejecting it with a swipe on the right-hand side of the steering wheel.
When a navigation destination is entered by touch control or voice command, route guidance alerts are shown on the BMW 3D Head-Up Display and further information on roads and junctions on the BMW Panoramic Vision. A whole map overview can be shown on the central display at any time for broader-scale orientation.

The personalisation of content reaches a new level with BMW Operating System X. The displays in the Panoramic Vision can be adapted to personal preferences. In addition, drivers now also have the option of choosing their own settings for driving attributes such as response and steering characteristics in the My Mode “Personal”. Moreover, pictures chosen by the user can be uploaded as backgrounds for the Central Display and the colourway of the Ambient Lighting and user interface design adjusted to their particular preferences, creating an even more personalised driving experience.

The BMW Intelligent Personal Assistant responds in the accustomed way to the prompt “Hey BMW” or can be called up by pressing the respective button on the multifunction steering wheel. The capabilities of the BMW Intelligent Personal Assistant are being constantly enhanced and will be taken to a whole new level for the Neue Klasse through the integration of Large Language Models (LLM). The use of this technology is focused initially on navigation, allowing the customer to give more extensive spoken commands using natural language: for example: “Take me to a charging station which is close to a food store.” At technology partner Amazon’s booth at CES 2025, visitors can get an initial impression of these capabilities using a beta version of this build of the BMW Intelligent Personal Assistant in a BMW X3. 

As with the current infotainment systems from BMW, the BMW Intelligent Personal Assistant can – if the driver desires – make suggestions proactively based on user behaviour. This intelligence expands further with BMW Operating System X. In relevant situations, the BMW Intelligent Personal Assistant highlights driver assistance systems, which are rarely used by the driver. As a kind of reminder, the system suggests activating Sport Mode on suitable routes if the driver has already activated Sport Mode independently beforehand. If the driver doesn’t respond to or ignores these proactive suggestions several times, the system learns and refrains from making suggestions from then on. 

BMW Operating System X carries over the scope for integration of third-party apps from the previous infotainment generation. As things stand, the BMW ConnectedDrive Store offers more than 60 apps worldwide for BMW Operating System 9. The selection will continue to grow, e.g. with productivity apps such as video conferencing service Zoom.

Design and technology for a unique user and driving experience.
The new BMW Panoramic iDrive is scalable and will be integrated into all new BMW models – across all vehicle segments and with all drive system technologies – from the end of 2025.

The driving experience takes centre stage. The driver should feel at ease and have full control over the vehicle. This principle is reflected in the design of the new BMW Panoramic iDrive. Particular attention is paid to the details: the user interface has been designed as intuitively and adaptively as possible to ensure seamless interaction. The result is a holistic experience enhanced by a harmonious combination of sound, light and innovative design. Every journey becomes a special moment of connection between human and vehicle.
“Technology and customer preferences are changing more quickly than ever. The design of digital experiences and sound is playing an ever more important role,” says Adrian van Hooydonk, Senior Vice President BMW Group Design. “The new BMW Panoramic iDrive not only makes our vehicles smarter and more user-friendly, it also enables much more extensive personalisation, which turns every new BMW into a car that is very much the user’s own.”
Another element in the holistic experience provided by the BMW Panoramic iDrive is the new HypersonX sound experience in the Neue Klasse models. Developed by the BMW Group Sound Design Studio, it comprises 43 sound signals and special driving sounds for Personal Mode and Sport Mode. The multi-dimensional spectrum adapts the sounds precisely to the driving situation at hand and, in so doing, creates an emotional interaction between the driver and their BMW.

Steyr. Just ten months after the start of system installation, the first electric engine was now shipped from BMW Group Plant Steyr to Debrecen, Hungary. At BMW Group Plant Debrecen, the e-engine will be used in Neue Klasse text vehicles.

“Our plant in Steyr has been delivering the first sixth-generation electric engines to the development department in Munich since September. We also recently began sending our e-engines directly to BMW Group Plant Debrecen, where they are being installed in test vehicles,” explains Klaus von Moltke, SVP Engine Production at BMW AG and Managing Director of BMW Group Plant Steyr.

Plant Steyr already launched production of the first next-generation electric motors three months ago. Helmut Hochsteiner, VP of Electric Engine Production at BMW Group Plant Steyr, adds: “Over the coming months, we will continue to validate and optimise the complex production process for the new electric motors,” The supply of Plant Debrecen with electric engines from Steyr marks the next important milestone towards the start of series production – both Neue Klasse and its electric motors from Austria.

Further information on the production of test vehicles at BMW Group Plant Debrecen can be found in the BMW Group PressClub.

This is BMW Group Plant Steyr

The BMW Group's largest engine plant worldwide is located in Steyr in Upper Austria, where 4,700 employees produce over one million petrol and diesel engines each year. Steyr is also home to a major development centre for the research and development of new drive trains. In June 2022, the company announced that it would begin production of e-drives in 2025. BMW Motoren GmbH in Steyr is currently one of Austria's top industrial companies in terms of revenues and exports.

Munich. The BMW Group is building a Cell Recycling Competence Centre (CRCC) for battery cells in Kirchroth, in the Straubing-Bogen district of Lower Bavaria, where it will implement a process referred to as “direct recycling”. This innovative procedure enables residual materials from battery cell production, as well as whole battery cells, to be mechanically dismantled into their valuable components. The recovered raw materials are then directly reused in pilot production of battery cells at the company’s own Battery Cell Competence Centres.

“The new Cell Recycling Competence Centre brings another element to our in-house expertise: From development and pilot production to recycling, we are creating a closed loop for battery cells,” says Markus Fallböhmer, SVP Battery Production at BMW AG, “taking advantage of the short distances between our Competence Centres in Bavaria.” The BMW Group is investing around 10 million euros in construction of the new Competence Centre. Installation work at the building is already scheduled to begin in the second half of 2025. Once completed, validation of the recycling method in near-series processes will get underway.

Innovative direct recycling recovers valuable raw materials

Battery cell raw materials – primarily lithium and cobalt, but also graphite, manganese, nickel and copper – are among the main cost factors in cell production. Responsible use of these resources is essential from both environmental and economic perspectives. “The direct recycling will help reducing the costs for our battery cell pilot line”, explains Fallböhmer. Unlike conventional methods, the main characteristic of direct recycling is that raw materials from battery cells are not reverted to their original state, but are instead fed back “directly” into the cell production cycle. This method dispenses with the previously common energy-intensive chemical or thermal processing. The recycling method was developed by BMW Group experts at the Competence Centres in Munich and Parsdorf. At the new CRCC, it will be implemented on a larger scale and, once the processes are finalised, battery cell material in the mid-double-digit tonne range can be recycled per year.

Optimal location for new Competence Centre in Bavaria

The BMW Group consolidates its battery cell expertise at its Competence Centres in Munich and Parsdorf. The Battery Cell Competence Centre (BCCC) in the north of Munich offers state-of-the-art labs and research facilities for developing the battery cells for next-generation high-voltage batteries and producing them in small quantities. The most promising battery cell from the BCCC will be scaled up for series processes on a pilot line at the Cell Manufacturing Competence Centre (CMCC) in Parsdorf. Once completed, recycling of surplus material from pilot production in Parsdorf will take place at the new Competence Centre in Kirchroth. The recovered raw materials will then be reused in cell production in Parsdorf. This ensures short distances between all Competence Centres and prevents valuable raw materials from being lost. Following on from the BCCC and CMCC, the CRCC thus represents the next step in the BMW Group’s battery cell strategy on the road to the circular economy.

Joint venture operates Competence Center, intellectual property at the BMW Group

The new CRCC, spanning an area of 2,200 m², will be integrated into the expansion of an existing building in the Kirchroth-Nord industrial park, near Straubing. Electrical energy from the discharged cells will be captured in energy storage systems within the building and used to operate the recycling systems. The energy concept will be rounded out by photovoltaic systems installed on the roof of the building. While the intellectual property for the recycling method is fully owned by the BMW Group – the Competence Centre will be built and operated by Encory GmbH. As a joint venture of the BMW Group and Interzero Group, Encory develops and implements logistics and consulting solutions in areas such as collection, recycling, and remanufacturing of vehicle components. Both partners hold a 50% stake in the company. Around 20 people will be employed in the new Competence Center.

Circular economy at the BMW Group

The BMW Group views the circular economy as one of the key issues in designing more resource-efficient vehicles. The premise is to optimize the circularity of materials. This means resources are not lost, but retain their value for long-term use. The BMW Group applies the principles of Re:Think, Re:Duce, Re:Use and Re:Cycle. From vehicle design and production, to recycling and reuse, everything is geared towards ensuring cars can serve as a source of raw materials for new vehicles at the end of their use phase. Recycling focuses, in particular, on the use of innovative methods to recover high-voltage batteries from electrified vehicles.

Debrecen. BMW Group Plant Debrecen in Hungary is shifting into first gear: Production of test vehicles is ramping up and the first near-series fully-electric X models for the Neue Klasse are now leaving the production line.* This marks the beginning of the final preparation phase for the start of series production in late 2025.

“The production of the first test vehicles in Debrecen is an important milestone in commissioning the new plant,” says Milan Nedeljković, member of the Board of Management of BMW AG responsible for Production. With vehicles now approaching series maturity, all logistics and production processes at the plant are being tested and constantly optimised under real conditions to ensure a smooth start of series production.

On the road to series production

The integration of new models in a plant starts with the production of near-series vehicles – an important step for the preparation of series production in Debrecen. As part of this process, test vehicles cycle through all production steps. This also means that all logistics processes, manufacturing equipment and operations performed by employees at the plant already have to function smoothly. These operations are just as complex as in actual series production. Despite the limited number of parts involved, they must still be made available in the appropriate logistics processes.

Materials and vehicle parts are delivered daily to Plant Debrecen, with test vehicles coming off the production line on a continuous basis. Every part and every production step is closely scrutinised. Special attention is paid to validation of cutting-edge production systems and tools, including their digital connectivity.

Running system tests for the future vehicle model helps identify further potential for optimisation. In the coming months, the focus will be on refining processes, based on the insights gained.

During this phase, new staff will also undergo intensive training on the installations and machinery. Close cooperation across all areas of production will ensure operations are seamlessly integrated for a smooth and successful series launch.

*Since this is a pre-production model, consumption data for the X model of the Neue Klasse is not available at this time.

+++ Investment of over € 100 million in BMW Group Plant Wackersdorf – site in Upper Palatinate becomes key enabler for electromobility +++

Wackersdorf. One year ago, the BMW Group announced plans to build a new battery testing centre at the Wackersdorf location. Now, the initial phase has come on-stream as planned. Scheduled for completion in late 2025, the site, which spans over 8,000 square metres, will rigorously test individual battery cells, complete high-voltage batteries and other electric powertrain components for future BMW Group models early in development, well before they go into production.

The investment of around 100 million euros has primarily focused on complex test-bench technology and the upgrades to the building's existing infrastructure required for operation. Hall 80, located on the grounds of the Wackersdorf plant, has been remodelled for this purpose: Originally constructed in the 1980s for a planned reprocessing facility, the building has quite a history.

In recent months, structural work for the new battery testing centre has been in progress, including installation of a new floor slab. A total of 2,200 tonnes of structural steel and 10,000 cubic metres of concrete were used in the expansion.

The commissioning of the initial section means that the so-called “battery testers” will be operating around the clock to test battery cells during the early phase of development. Essentially, the electrical performance of individual battery cells is determined during charging and discharging under different conditions. This allows use cases that will be relevant for customers later to be simulated, long before a vehicle under development drives on the road. 

“Parallel testing of several hundred battery cells will initially be possible. Once the ramp-up is complete, testing capacity will reach several thousand battery cells,” explains Project Manager Dr Felix Schmidt-Stein. In the final phase from 2025 onwards, the testing centre will also be used to validate the BMW Group’s battery-electric vehicles prior to the official launch of series production and ensure the required premium quality. “For example, this includes subjecting the batteries to vibration and shock tests,” adds Schmidt-Stein. “We can also simulate complex driving patterns in endurance tests, including charging and discharging cycles. Tests like these are essential for type approval of electric vehicles.” 

“Commissioning of the first phase of the new battery testing centre means that the BMW Group's Wackersdorf location is poised to become a major facilitator in the transformation towards electromobility,” confirms Site Manager Christoph Peters. “The new battery testing centre gives our site a broader foundation. We are now adding a fourth pillar in Wackersdorf – in addition to supplying our overseas plants, cockpit production and door production for Rolls-Royce models. This represents a strong commitment to the future of the site.” 
BMW Group Corporate Communications

Saskia Graser, head of Communications Regensburg and Wackersdorf
Cell phone: +49 151 6060 2014, Email: Saskia.Graser@bmw.de 

Media website: https://newsroom.bmwgroup.com/global/en 
Email: presse@bmw.de 

BMW Group Plants Regensburg and Wackersdorf

The BMW Group has viewed itself for decades as the benchmark for production technology and operational excellence in vehicle construction – including at its locations in Regensburg and Wackersdorf. 
The BMW Group vehicle plant in Regensburg has been in operation since 1986 and is one of more than 30 BMW Group production locations worldwide. A total of up to 1,400 vehicles of the BMW X1 and BMW X2 models come off the production line at Plant Regensburg every workday – destined for customers all over the world. Different types of drive trains are flexibly manufactured on a single production line – from vehicles with internal combustion engines to plug-in hybrids, to fully-electric models. 

High-voltage batteries for the electric models built in Regensburg are also produced locally, in direct proximity to the vehicle plant. They are assembled at the electric component production facility, which opened in 2021 at the Leibnizstrasse location.

BMW Innovation Park Wackersdorf also belongs to the Regensburg site. The 55-hectare campus built in the 1980s was originally intended as a nuclear reprocessing facility. The BMW Group has located its cockpit production there, as well as its parts supply for overseas plants. In addition to BMW as the largest employer, several other companies are also based at Innovation Park Wackersdorf. A total of around 2,500 employees work there. 
The BMW Group core staff at the Regensburg and Wackersdorf locations in eastern Bavaria is made up of around 9,250 employees, including more than 300 apprentices.

www.bmwgroup-werke.com/regensburg/de.html 

Leipzig. The electrification of transport logistics for e-component production is gathering pace. Recently, two fully electrically powered trucks took over the transportation of components from the warehouse to the high-voltage battery production halls at BMW Group Plant Leipzig. Together, they will save around nine tonnes of CO₂ a year compared with conventional diesel-powered transport vehicles.

The two electric trucks complete the eight-kilometre round trip from the logistics centre to Leipzig’s high-voltage battery production halls and back up to twelve times a day. That’s almost 100 kilometres per truck per day – covered quietly and with zero local emissions. For short distances like this, electric trucks are the perfect solution.

The two vehicles transport parts for e-drive production, primarily of battery cells and battery modules. They take the parts from the logistics warehouse in BMW Allee to the production halls on the plant premises, operating round the clock in three shifts. The semi-trailer sports a battery symbol on the side and words proclaiming that the fully electric truck is on the road for Leipzig – for local production, emissions-free transportation and high-voltage batteries made in the city.

Electric trucks support high-voltage battery production

BMW Group Plant Leipzig has been manufacturing e-components for the production network since 2021. Since early 2024 it has also been running the entire high-voltage battery production process for the current, fifth generation. This consists of three stages, which are carried out on the plant’s five cell coating, three module production and two high-voltage battery assembly lines – and include the powerpacks for the MINI Countryman Electric, manufactured in-house since March of this year. Battery production currently operates with a team of about 1,000 employees.

As well as high-voltage batteries for the MINI Countryman Electric, Plant Leipzig produces battery packs and modules for the BMW production network, for the fully electric BMW iX1, BMW iX2, BMW i4, BMW i5 and BMW iX.

High-voltage batteries are produced in the halls that used to be home to BMW i3 and BMW i8 assembly. The halls have now been converted and new buildings added, creating some 150,000m² of space for this area of production on the premises of Plant Leipzig. Annual output stands at up to 300,000 high-voltage batteries a year, with the BMW Group’s investments in e-component production at Plant Leipzig totalling more than 900 million euros so far.

Plant Director Petra Peterhänsel sees the introduction of the two electric trucks as a further milestone on the road to the future: “We are delighted to be undertaking this journey with our longstanding logistics partner, the Rudolph Logisitik Gruppe. The transition to electromobility and sustainable production affects not only our BMW and MINI cars but our production methods and supply chains as well.”

Lower emissions, less noise

Powered by lithium iron phosphate (LFP) battery systems, the two fully electric trucks working for BMW Group Plant Leipzig are made by Designwerk. According to the manufacturer, the four electric drives in a Designwerk electric truck deliver 610 hp and are three times more efficient than their diesel counterparts when out on the road. They produce zero emissions when in operation and do not impact the environment with soot particles, nitrogen oxides (NOx), carbon dioxide (CO₂) or engine noise. Studies show that when passing or accelerating at low speeds, an electric truck emits around five decibels (dB) less noise than a comparable diesel-powered vehicle.

Trucks are charged during drivers’ breaks. Their 340 kWh batteries take around 1.5 hours to recharge to 80 percent. They can be replenished about 3,000 times, according to Designwerk.

Open to different technologies to reduce CO₂ from logistics

The use of electric trucks in logistics is among the measures in the BMW Group-wide Green Transport Logistics Project. This aims to reduce emissions from transportation in the global production and sales network, and takes an open approach to technologies, prioritising CO₂-efficient energy and transportation options. Besides battery-electric trucks, increasing use is being made of biofuels such as HVO100, made from residues and waste and used at the Munich site, for instance. Production deliveries in Germany have also been trialled using bio-LNG in vehicles on the roads. Moreover, in an attempt to learn more about using hydrogen as a fuel for trucks, the BMW Group is involved in research projects such as H2Haul and HyCET.

By 2030 the BMW Group aims to reduce CO₂ emissions across the vehicle lifecycle by 40 percent, compared with 2019.

Paris. Parallel to the market launch of the new BMW 1 Series, the new BMW X3 and the new BMW M5, the BMW Group will present the next steps in its unchanged product strategy at the Mondial de l'Auto Paris 2024. The focus is on the world premieres of the first all-electric MINI John Cooper Works models and the first joint motor show appearance of the latest concept studies of the BMW Neue Klasse, which will go into series production in 2025.

“The BMW Group is demonstrating its pioneering role in electric mobility at the Mondial de l'Auto Paris with a cross-segment range of electrified vehicles. Thanks to our attractive BEV product portfolio, we are able to grow our all-electric sales even in a demanding market environment. In the European market, we were even able to gain market share with the BMW brand,” says Jochen Goller, member of the Board of Management of BMW AG, responsible for Customers, Brands, Sales.

What BMW M is to BMW, JCW is to MINI. 
The new all-electric MINI John Cooper Works models.
With the world premiere of the all-electric MINI John Cooper Works Electric and the MINI John Cooper Works Aceman, the brand's long racing history is transferred to the here and now with innovative power. The two models effortlessly transfer motorsport expertise from the race track to the road. In addition to the exclusive, sporty design

and optimised aerodynamic driving characteristics, MINI fans can also look forward to the brand's hallmark agile handling. Click [here] for more information.

The roll-out of electrification to the John Cooper Works brand within MINI transmits another strong signal on how the BMW Group is committed to electric driving as a strategic direction.

At the same time, the Mondial de l'Auto Paris 2024 marks the ideal starting point for intensified communication in the further ramp up for BMW Neue Klasse, due for launch in 2025.

First joint appearance of the BMW Vision Neue Klasse and BMW Vision Neue Klasse X.
BMW is showing two Neue Klasse Vision Vehicles in Paris, which provide an outlook on the wide range of BMW's future model portfolio.
The BMW Vision New Class is a sporty electric sedan for the premium mid-range. The BMW Vision New Class X transfers the philosophy and technology of the future generation of vehicles to the Sports Activity Vehicle segment.

"With the two vision cars for Neue Klasse we are showing how we are going to change the look & feel of the BMW brand. Many aspects of our cars will be completely new and yet we believe that the Neue Klasse will reflect the very essence of the BMW brand", says Adrian van Hooydonk, head of BMW Group Design.

Both vehicles are characterized by a clear, reduced design language. In the interior, the next generation of BMW iDrive enables intuitive interaction between driver and vehicle. The combination of BMW Panoramic Vision, 3D Head-Up Display, Central Display and the new multifunction steering wheel redefine the BMW driver orientation. Click [here] for more information.

The new BMW iX2 features in-car entertainment highlight UNO® Car Party! And Paramount+.
With UNO® Car Party! in the BMW iX2, the BMW Group is showing the next in-car gaming highlight. Since the end of August 2024, the game has already been available in over 500,000 BMW and MINI vehicles via the AirConsole platform. In addition, it was only at the beginning of October that the BMW Group brought the popular subscription streaming service Paramount+ into the vehicle, offering subscribers access to a wide range of blockbusters, new originals and hit series such as Star Trek Discovery. Customers have access to in-car entertainment highlights in their vehicles with BMW and MINI Operating System 9 in conjunction with BMW Digital Premium or the MINI Connected Package*.

*Paramount+ subscription is not part of BMW Digital Premium/MINI Connected Package.

In addition to the outlook for the BMW Neue Klasse and new digital services, also hydrogen technology is key topic at the Mondial de l'Auto Paris 2024, as a further expression of the BMW Group's open technology drive strategy.

BMW will launch its first hydrogen-powered production model in 2028. 
After successfully testing the BMW iX5 Hydrogen pilot fleet worldwide, the BMW Group is now preparing for series production of vehicles with hydrogen drive systems in 2028. The series production models will be integrated into BMW’s existing portfolio. Hydrogen is recognized as a promising future energy carrier of the future, actingas an effective storage medium for renewable energy sources, helping to balance supply and demand and enabling a more stable and reliable integration of renewables into the energy grid.

Click [here] for more information.

The BMW Group is also showing the complete all-electric BMW and MINI product portfolio at Mondial de l'Auto Paris 2024. It now consists of more than 15 models, which cover all major market segments.

The motor show presentation is rounded off with the electric two-wheelers from BMW Motorrad for urban areas. Click [here] for more information.

The BMW Group stand at Mondial de l'Automobile Paris 2024 covers an area of 1,300 square metres. The fair is open to trade visitors on 14 October and to the general public from 15 to 20 October 2024.

Munich/Zagreb. Innovations often arise where experts from different areas and organizations come together. This is exactly what is happening now as part of a research cooperation between the BMW Group's Battery Cell Competence Center (BCCC) and the University of Zagreb's Regional Center of Excellence for Robotic Technology (CRTA).

The two partners are jointly developing solutions to improve the production of battery cells using artificial intelligence (AI). Doctoral candidates and students at the University of Zagreb are collecting and structuring existing production data. Based on this data, AI models are created that can identify certain patterns in the data. This allows them to make predictions on how production can be further optimized in terms of performance, quality and costs.

Battery cell know-how along the entire value chain

The BMW Group bundles its battery cell know-how in its competence centers in Munich and Parsdorf. At the Battery Cell Competence Center (BCCC) in the north of Munich, battery cells for future generations of high-voltage batteries are developed and manufactured in small quantities. State-of-the-art laboratories, research facilities and prototyping facilities cover the know-how along the entire battery cell value chain. The BCCC is complemented by the Cell Manufacturing Competence Center (CMCC) in Parsdorf. The best battery cell from the BCCC is scaled towards a series process at the pilot line in Parsdorf. The close, cross-departmental cooperation between development, purchasing and production uniquely links product and process at the BMW Group.

The importance of European knowledge exchange

The University of Zagreb contributes its expertise in the fields of mechanical engineering, electrical engineering and computer science to this project. Both partners benefit from the continuous exchange of knowledge: "As a university, we offer the BMW Group access to the latest research results and innovative ideas, while our students benefit from the opportunity to apply their theoretical knowledge in practice," says Zdenko Tonković, Dean of the Faculty of Mechanical Engineering and Naval Architecture at the University of Zagreb.

Promoting young talents

Another aspect of this cooperation is the promotion of young talents. "Through this joint project, we inspire students for the BMW Group and the innovative work in our battery cell competence centers," explains Moritz Poremba, Head of Battery Cell Recycling Technology Development at the BMW Group. "Of course, we also hope to attract young talents to our company." The students benefit from the cooperation through intensive mentoring and the opportunity to expand their professional network in the industry. This increases their attractiveness on the job market and offers them excellent career opportunities. The cooperation between the BMW Group and the University of Zagreb strengthens the innovative power and competitiveness of both partners.

Munich. BMW plans to launch its first-ever series production fuel cell electric vehicle (FCEV) in 2028, thereby offering customers an additional all-electric powertrain option with zero local emissions in a BMW. The BMW Group and the Toyota Motor Corporation are pooling their innovative strength and their technological capabilities to bring a new generation of fuel cell powertrain technology to the roads. Both companies share the aspiration of advancing the hydrogen economy and have extended their collaboration to push this locally zero-emission technology to the next level.

The BMW Group’s leading development expertise in electric drive technologies is once again demonstrated by its relentless efforts to advance hydrogen fuel cell technology and its embracing of a 'technology-openness' approach in order to provide customers with a range of mobility solutions for the future.

“This is a milestone in automotive history: the first-ever series production fuel cell vehicle to be offered by a global premium manufacturer. Powered by hydrogen and driven by the spirit of our cooperation, it will underscore how technological progress is shaping future mobility,” said Oliver Zipse, Chairman of the Board of Management of BMW AG. “And it will herald an era of significant demand for fuel cell electric vehicles.”

Koji Sato, President and Member of the Board of Management (Representative Director) Toyota Motor Corporation, said, “We are pleased that the collaboration between BMW and Toyota has entered a new stage. In our long history of partnership, we have confirmed that BMW and Toyota share the same passion for cars and belief in ‘technology openness’ and a ‘multi-pathway’ approach to carbon neutrality. Based on these shared values, we will deepen our collaboration in efforts such as the joint development of next-generation fuel cell systems and the expansion of infrastructure, aiming for the realization of a hydrogen society. We will accelerate our efforts together with BMW and partners across various industries to realize a future where hydrogen energy supports society."

Shared powertrain technology utilized across individual models to offer attractive FCEV options.

The BMW Group and the Toyota Motor Corporation will jointly develop the powertrain system for passenger vehicles, with the core fuel cell technology (the individual third-generation fuel cells) creating synergies for both commercial and passenger vehicle applications. The result of this collaborative effort will be utilized in individual models from both BMW and Toyota and will expand the range of FCEV options available to customers, bringing the vision of hydrogen mobility one step closer to reality. Customers can expect the BMW and Toyota FCEV models to maintain their distinct brand identities and characteristics, providing them with individual FCEV options to choose from. Realizing synergies and amalgamating the total volume of powertrain units by collaborating on development and procurement promises to drive down the costs of fuel cell technology.

BMW will launch its first hydrogen-powered production model in 2028.  

After successfully testing the BMW iX5 Hydrogen pilot fleet worldwide, the BMW Group is now preparing for series production of vehicles with hydrogen drive systems in 2028 on the basis of the jointly developed next-generation powertrain technology. The series production models will be integrated into BMW’s existing portfolio, i.e. BMW will offer an existing model in an additional hydrogen fuel cell drive system variant. As FCEV technology is another electric vehicle technology, the BMW Group explicitly views it as complementing the drive technology used by battery electric vehicles (BEV) and next to plug-in hybrid electric vehicles (PHEV) and internal combustion engines (ICE).

A new level of partnership.

The BMW Group and the Toyota Motor Corporation can look back on over a decade of trusting and successful collaboration. Building on this, the companies are now extending their cooperation to accelerate innovation of next-generation fuel cell powertrain systems and pioneer this new technology.

Shared vision of advancing the hydrogen economy.

The pathway to realizing the full potential of hydrogen mobility includes its use in commercial vehicles and the establishment of a refuelling infrastructure for all mobility applications, including hydrogen-powered passenger vehicles. Recognizing the complementary nature of these technologies, the BMW Group and the Toyota Motor Corporation are supporting the expansion of both hydrogen refuelling and battery electric vehicle charging infrastructure. Both companies are encouraging sustainable hydrogen supply by creating demand, working closely with companies that are building low-carbon hydrogen production, distribution, and refuelling facilities.

The BMW Group and Toyota Motor Corporation are advocating the creation of a conducive framework by governments and investors to facilitate the early-stage penetration of hydrogen mobility and ensure its economic viability. By promoting the corresponding infrastructure, they aim to establish the FCEV market as an additional pillar alongside other powertrain technologies. Furthermore, the companies are seeking regional or local projects to further drive the development of hydrogen infrastructure through collaborative initiatives.

Benefits of hydrogen-powered technology.

Hydrogen is recognized as a promising future energy carrier for global decarbonization. It acts as an effective storage medium for renewable energy sources, helping to balance supply and demand and enabling a more stable and reliable integration of renewables into the energy grid. Hydrogen is the missing piece for completing the electric mobility puzzle where battery electric drive systems are not an optimal solution.

A BMW planeia lançar em 2028, o seu primeiro veículo elétrico a célula de combustível (FCEV) de produção em série, reforçando a mobilidade elétrica livre de emissões.

O BMW Group e a Toyota Motor Corporation estão colaborar com o intuito de trazer para as estradas uma nova geração de tecnologia de célula de combustível. O principal fabricante global premium e o maior fabricante de automóveis do mundo partilham a ambição de impulsionar a economia do hidrogénio e elevar a tecnologia sem emissões a um novo patamar.

A liderança do BMW Group no desenvolvimento de tecnologias de propulsão elétrica é novamente demonstrada pelos seus esforços no avanço da tecnologia de célula de combustível de hidrogénio, com o intuito de disponibilizar uma gama diversificada de soluções de mobilidade para o futuro.

“Este é um marco na história automóvel: o primeiro veículo de produção em série com célula de combustível a ser oferecido por um fabricante premium global. Movido a hidrogénio e impulsionado pelo espírito da nossa cooperação, este veículo sublinhará como o progresso tecnológico está a moldar a mobilidade do futuro”, afirma Oliver Zipse, Presidente do Conselho de Administração da BMW AG, acrescentando que esta inovação  “anunciará uma era de procura significativa por veículos elétricos a célula de combustível.”

“Estamos satisfeitos pelo facto de a colaboração entre a BMW e a Toyota ter entrado numa nova fase” de Koji Sato, Presidente e Membro do Conselho de Administração da Toyota Motor Corporation

A BMW lançará o primeiro modelo de produção movido a hidrogénio em 2028. Após testar com sucesso a frota piloto do BMW iX5 Hydrogen mundialmente, o BMW Group está agora a preparar-se para a produção em série de veículos com sistemas de propulsão a hidrogénio, com base na tecnologia de propulsão de próxima geração que será desenvolvida em conjunto com a Toyota. Estes modelos de produção em série serão integrados na atual gama de veículos da BMW, oferecendo uma variante adicional de sistema de propulsão elétrico  alimentado por  uma célula de combustível de hidrogénio.

A parceria entre o BMW Group e a Toyota Motor Corporation remonta a mais de uma década de colaboração bem-sucedida. Esta parceria é agora reforçada com o intuito de acelerar a inovação nos sistemas de propulsão a célula de combustível de próxima geração e liderar esta nova tecnologia.

Visão partilhada de avanço da economia do hidrogénio

O caminho para concretizar o potencial completo da mobilidade a hidrogénio inclui a sua utilização em veículos ligeiros de passageiros e a criação de uma infraestrutura de reabastecimento para todas as aplicações de mobilidade. Reconhecendo a natureza complementar destas tecnologias, o BMW Group e a Toyota Motor Corporation apoiam a expansão tanto da infraestrutura de reabastecimento de hidrogénio quanto a infraestrutura de carregamento de veículos elétricos a bateria.

Ambas as empresas incentivam o fornecimento sustentável de hidrogénio, criando procura e colaborando estreitamente com empresas que estão a construir instalações de produção, distribuição e reabastecimento de hidrogénio de baixo carbono.

Além disso, o BMW Group e a Toyota Motor Corporation defendem a criação de um quadro favorável por parte de governos e investidores para facilitar a mobilidade a hidrogénio e assegurar a sua viabilidade económica. Ao promover a infraestrutura correspondente, visam estabelecer o mercado de FCEV como um pilar adicional ao de outras tecnologias de propulsão.

Benefícios da tecnologia a hidrogénio

O hidrogénio é reconhecido como um promissor vetor energético para a descarbonização global. Atua como um meio eficaz de armazenamento para fontes de energia renováveis, ajudando a equilibrar a oferta e a procura, e permitindo uma integração mais estável e fiável das energias renováveis na rede elétrica. O hidrogénio é a peça que falta para completar o puzzle da mobilidade elétrica.

Dingolfing. Since the first production lines went on-stream ten years ago, BMW Group Component Plant 02.20 in Dingolfing has built more than 1.5 million electric motors, one million high-voltage batteries and ten million battery modules. The site in Lower Bavaria continues to blaze a trail for the ramp-up of electromobility. Today, the BMW Group has a higher percentage of total sales from electrified vehicles than any other German automotive manufacturer. “Our Plant 02.20 in Dingolfing plays a crucial part in this,” explains Stefan Kasperowski, Vice President High-Voltage Battery production at Bavarian plants. “We provide the BMW Group’s vehicle plants with a reliable and flexible supply of e-drive components for our electrified vehicles.”

State-of-the-art site with long history

Plant 02.20 is a prime example of successful transformation, having been in operation for more than half a century. For many years, it was home to the BMW Group’s central spare parts warehouse. It was only in the early 2010s that aftersales logistics was relocated, making room for electromobility. There were initially about 200 employees producing electric motors and high-voltage batteries for the BMW Group’s first plug-in hybrids and, later, its fully-electric models. The current fifth generation of electric motors and high-voltage batteries began rolling off the production line in 2020. Since 2015, the BMW Group has invested more than one billion euros in transforming Plant 02.20 into the company's “heart” and Competence Centre for E-Drive Production, establishing around 15 production lines for battery modules, electric motors and high-voltage batteries. Over time, the number of BMW Group employees has gradually increased and production volumes have risen. Today, more than 2,500 people work in e-drive production at Plant 02.20. The majority of these employees previously worked in other areas of vehicle production.

Ten years ago, Markus Fallböhmer, current Senior Vice President Battery Production at the BMW Group, was responsible for planning and production of electric drive systems in Dingolfing and Landshut. “Redesigning and transforming Plant 02.20 plant at this record pace was certainly quite a feat,” he recalls. “We managed construction work, commissioning of systems and series production virtually simultaneously. This enabled us to meet growing demand for electrified models and successfully implement the transition to e-mobility.” As Fallböhmer points out, the high quality of e-components, economical production methods and stable supplies to vehicle plants are all crucial. Today, Plant 02.20 consistently operates at a high level, supplying the production network with components for electrification. “Dingolfing is the heart of the e-drive at the BMW Group,” says Klaus von Moltke, Senior Vice President Engine Production at the BMW Group. “About 80 percent of all our electric motors are currently produced in Dingolfing.” The figure for high-voltage batteries is around 60 percent.

Close links between battery factory and vehicle production

To continue to meet growing demand for electrified models in the coming years, the BMW Group has created a global network for e-drive production, with additional locations in Leipzig, Regensburg, Spartanburg (USA) and Shenyang (China) for the current generation of high-voltage batteries. For the new sixth generation, which will be used from 2025 onwards in the models of the Neue Klasse, locations are being established around the world in the US, Mexico, China and Hungary, as well as in Irlbach-Straßkirchen in Lower Bavaria. In line with its “local for local” principle, these sites are located as close as possible to BMW Group vehicle plants.

Production network benefits from Dingolfing expertise

As the nucleus of electrification at the BMW Group, Plant 02.20 will continue to play a key role in the future, supporting development of new facilities in a variety of different ways. Comprehensive skills development for the new plant in Debrecen is currently underway. Some of the employees will also be deployed to the new high-voltage battery facility in Irlbach-Straßkirchen. The BMW Group engine plant in Steyr, Austria, which will build the upcoming generation of electric motors for the Neue Klasse, will also benefit from Dingolfing’s expertise in electric motor production, while the housing will be supplied by Plant Landshut. Looking ahead, Kasperowski says: "Both the capacity of the Dingolfing location and its employees’ skills will continue to be in demand.” Fallböhmer confirms: “We are reaping huge benefits from having navigated the learning curve for e-component production ahead of others. The whole production network is now harnessing this knowledge to continue the success and bolster the growth of e-mobility at the BMW Group.”

If you have any questions, please contact:

Julian Friedrich, BMW Group Plant Dingolfing, head of Communications
Telephone: +49 8731 76 22020, Email: Julian.Friedrich@bmw.de

Thomas Niedermeier, BMW Group Plant Dingolfing, Communications
Telephone: +49 8731 76 27666, Email: Thomas.Niedermeier@bmwgroup.com

Christian Marxt, BMW Group Communications Production Network
Telephone: +49 89 382 79158, mobile: +49 151 601 12225, Email: Christian.Marxt@bmw.de

Munich. The Neue Klasse will usher in a new era of fully electric driving at the BMW Group – the success of which will depend heavily on the production of powerful high-voltage batteries. That’s why the BMW Group is expanding its production network for the next generation of high-voltage batteries significantly. “We are setting up five facilities on three continents to produce our sixth-generation high-voltage batteries,” explained Milan Nedeljković, Board Member for Production at BMW AG. Across the globe, the principle of “local for local” will apply: "Close connection of battery production with vehicle production is part of our strategy," explains Markus Fallböhmer, Senior Vice President of Battery Production at BMW AG. This helps the BMW Group increase the resilience of its production.

Battery and vehicle production closely connected

The Neue Klasse will be the first to incorporate the all-new cylindrical cells. These represent a technological leap by the BMW Group, offering vastly improved energy density, charging times and range. They will be assembled in new facilities located as closely as possible to vehicle plants, in keeping with the principle of “local for local”. State-of-the-art assembly plants for sixth-generation high-voltage batteries are currently under construction in Irlbach-Strasskirchen (Lower Bavaria), Debrecen (Hungary), Woodruff (near Plant Spartanburg in the US), Shenyang (China) and San Luis Potosí, Mexico. With the “local for local” approach in place, production will be able to continue even when unexpected political or economic events occur. In addition, short distances between battery and vehicle plants will reduce the carbon footprint of car production. The BMW Group is also upgrading its existing sites and securing jobs.

Neue Klasse to launch first at Plant Debrecen in 2025

The first Neue Klasse vehicles will be produced at the BMW Group’s new plant in Debrecen, starting in 2025. High-voltage battery and vehicle manufacturing will launch in parallel. With the training centre in Debrecen open since autumn 2023 and the communications centre in use since February 2024, a large number of employees are already at work in their offices at the site. The production team, meanwhile, are preparing for their new jobs at various locations across the BMW Group production network. This will ensure a smooth start to pre-series production and a successful series launch in the second half of 2025.

China to produce the Neue Klasse from 2026

From 2026 Neue Klasse vehicles will also be made by BMW Brilliance Automotive (BBA) in Shenyang, China. Here, too, the sixth-generation high-voltage batteries required for the cars will be manufactured locally. The production hall was completed in November 2023, and the installation of plant and machinery has been underway since March 2024. The first Chinese-made pre-series batteries will roll off the production line at the end of this year. Preparing for the launch of the Neue Klasse, the BMW Group has also set up its largest R&D network outside Germany, with facilities in Beijing, Shanghai, Shenyang and Nanjing.

Neue Klasse in Mexico from 2027

At San Luis Potosí in Mexico, additional production capacity is being established for series production of the Neue Klasse to start in 2027. Construction of the new high-voltage battery assembly plant started in May 2024 and will comprise more than 80,000 square metres of production space when completed. But the integration of battery assembly is not all that’s changing at Plant San Luis Potosí: the bodyshop is set to grow to more than 90,000 square metres in total, while vehicle assembly and logistics spaces will expand by nearly 10,000 square metres. The BMW Group is the first premium OEM to manufacture fully electric cars and high-voltage batteries in Mexico – and a pioneer in the industry.

BMW Group Plant Woodruff: High-voltage batteries for Spartanburg

Electromobility is also advancing in South Carolina. BMW Group Plant Woodruff will cover an area of about 93 hectares and consist of a technology building, ancillary structures, an energy centre, a staff restaurant and a fire department. It will create more than 300 new jobs with the BMW Group. When construction reaches completion in 2026, Woodruff will assemble high-voltage batteries for fully electric cars made in nearby Plant Spartanburg. The ground-breaking ceremony for the first building in Woodruff – the training centre – was in June 2023.

High-voltage batteries from Lower Bavaria

The BMW Group is also going to manufacture high-voltage batteries for Neue Klasse models in Germany – specifically in Irlbach-Straßkirchen, in Lower Bavaria. The new facility will supply sixth-generation high-voltage batteries to German car plants. The BMW Group was granted permission to build the new high-voltage battery assembly plant in April 2024 and erected the first of more than 1,000 concrete pillars for the production hall in late June 2024. The citizens of Straßkirchen had previously voted in favour of the BMW Group coming to their area, with a clear majority of over 75 percent in the referendum of September 2023.

Battery expertise concentrated in Parsdorf and Munich

Prototype battery cells like the ones in the Neue Klasse, launching in 2025, are already being made at the BMW Group’s Cell Manufacturing Competence Centre (CMCC) in Parsdorf, just east of Munich. The CMCC was built to complement the Battery Cell Competence Centre (BCCC) in the north of the city, where development work is carried out. The CMCC scales up the best product for series production. Product and process are uniquely interlinked by the close collaboration across divisions, between Development, Purchasing and Production. The BMW Group operates further pre-series plants and pilot lines for future high-voltage batteries in Munich and the nearby towns of Parsdorf and Hallbergmoos.

Munich. The BMW Startup Garage and the Munich-based company DeepDrive are set to road-test a revolutionary electric motor. The concept features dual rotor technology and is expected to enable super-efficient, powerful drives that offer plenty of range. After a successful pilot project with promising results on the test rig, the BMW Group and DeepDrive are now planning their first field test. Various versions of the new drive will be installed into BMW Group models and their handling tested out on the road.

DeepDrive’s innovative concept more or less melds two electric motors into a single unit, creating an extremely compact drive that’s energy-efficient and has a high torque density. In a conventional electric motor, the stator moves either an internal or an external rotor; with DeepDrive’s dual rotor concept, the stator drives both rotors simultaneously. The compact design and light weight of the unit allow for an in-wheel drive system, in which each wheel hub has its own electric motor. The technology can also be used in a traditional, centralised drive system, where a central motor block powers the vehicle.

BMW values the maturity level and scalability potential of the DeepDrive innovation.
BMW was the first major manufacturer to discover DeepDrive and has been intensifying collaborations with them since the IAA 2021. Their technology is already remarkably mature: “DeepDrive’s prototype parts largely exceeded our specifications,” says Karol Virsik, Head of Research Vehicle Concepts and Technologies at the BMW Group. “That’s really unusual at such an early stage and with a completely new technology.”

After a stint on the test rig, the proof of concept was deemed successful, delivering top results. The next step is to perform a real-world validation out on the road. The in-wheel motors will require less space and be more energy-efficient, lighter and less costly, making them an attractive option for a wide range of vehicle models and potentially highly scalable. “DeepDrive has developed an exciting vision for the electric drive of the future,” said Virsik. “The Startup Garage allows us to experiment with DeepDrive and work out what drives might look like in the generation after next.”

DeepDrive is now collaborating with other manufacturers and major suppliers as well, such as Continental. In 2024, their motor concept was honoured with the German Innovation Award. “Collaborating with BMW gave us a springboard really early on,” said Felix Pörnbacher, co-founder and co-CEO of DeepDrive. “It helped us navigate the complex corporate world and meet and exceed the rigorous standards of the automotive industry. Our goal now is to get it integrated into a production model.”

Collaborating with startups accelerates innovations at the BMW Group.
The BMW Startup Garage operates as a venture client, implementing groundbreaking technologies developed by startups and enhancing the BMW Group’s capabilities in innovation, sustainability and operational performance. The venture client model was established in 2015, with BMW acting as a customer and working closely with young companies to develop their technologies. “The BMW Startup Garage is an excellent opportunity to connect with startups. We then carry on working with the best of them,” said Virsik. “Startups are really important to us because they think unconventionally and out-of-the-box. They give us new perspectives.”

San Luis Potosí. BMW Group Plant San Luis Potosí is gearing up for production of the Neue Klasse: Construction of a local high-voltage battery assembly has now begun, along with expansion projects for the body shop, assembly and logistics areas. A total of 800 million euros will be invested in expanding the Mexican production site.

The Neue Klasse will also be produced in Mexico from 2027 onwards. The Sports Activity Vehicle model will be launched at the new BMW Group Plant Debrecen in Hungary as the initial derivative of the Neue Klasse in late 2025, while the Sedan will ramp up in Munich in 2026. Just one year later, additional production capacity will be available in Mexico – initially, for the Sports Activity Vehicle. The future high-voltage battery assembly at Plant San Luis Potosí, covering an area of more than 80,000 square metres, is key to integrating the Neue Klasse at the production site.

“The battery assembly in San Luis Potosí will be part of our global production network. For our new sixth-generation e-drive alone, we are building five locations on three continents,” explained Milan Nedeljković, member of the Board of Management of BMW AG responsible for Production, at the start of construction in Mexico. The BMW Group is committed to the “local for local” principle worldwide. “Locating battery factories close to vehicle manufacturing makes production more resilient.”

Close links between battery factory and vehicle production

In line with its “local for local” principle, the BMW Group locates its high-voltage battery assembly facilities worldwide as close as possible to its vehicle plants. In addition to the location in San Luis Potosí, assembly sites for sixth-generation high-voltage batteries are also being built in Debrecen (Hungary), Shenyang (China), Woodruff, near Spartanburg (USA) and Irlbach-Straßkirchen (Lower Bavaria). This approach safeguards production, even in the event of unforeseen political and economic developments. Existing locations are also being strengthened, securing jobs. The short distances involved reduce the carbon footprint of vehicle production.

The BMW Group will use its newly developed round cells for the first time in the Neue Klasse. This leap in technology will boost the energy density of cells by 20 percent and improve charging speed by up to 30 percent. Range will be extended by 30 percent. 

Further development of Plant San Luis Potosí

As well as integrating battery assembly, other changes are being made at Plant San Luis Potosí: Just under 20,000 square metres will be added to the body shop, resulting in a total area of over 90,000 square metres. Assembly and logistics areas are also being expanded by almost 10,000 square metres.

“With this further development of our site, we are also gearing up in Mexico for the launch of the next BMW model generation. As the first premium OEM producing fully-electric vehicles and high-voltage batteries in Mexico, we are at the forefront of our industry and, at the same time, continuing to reduce our environmental footprint,” said Harald Gottsche, president and CEO of BMW Group Plant San Luis Potosí.

Photovoltaic output to double

When it comes to efficient energy supplies, the BMW Group uses site-specific solutions at its locations around the world. “In Mexico, we are planning to expand the photovoltaic systems within the plant, to double the output from the solar panels,” said Nicole Haft-Zboril, Head of Real Estate Management at the BMW Group. “The plan is to generate more than 20 percent of the electricity we need at the moment – directly on the factory premises.” The wastewater treatment plant has also been expanded, with an investment of 3.3 million euros significantly increasing the reuse of treated wastewater.

Extensive skills development programme

BMW Group Plant San Luis Potosí is also stepping up its commitment to skills development, aimed at ensuring employees are highly qualified and prepared for the challenges of the future. Training will include topics such as safety awareness around production of high-voltage systems and the use of robotics in manufacturing processes.

The BMW Group plant in San Luis Potosí started production in 2019. Around 3,700 employees currently produce the BMW 3 Series Sedan as well as the BMW 2 Series Coupé and the BMW M2 models for the global market.

San Luis Potosí. BMW Group Plant San Luis Potosí is gearing up for production of the Neue Klasse: Construction of a local high-voltage battery assembly has now begun, along with expansion projects for the body shop, assembly and logistics areas. A total of 800 million euros will be invested in expanding the Mexican production site.

The Neue Klasse will also be produced in Mexico from 2027 onwards. The Sports Activity Vehicle model will be launched at the new BMW Group Plant Debrecen in Hungary as the initial derivative of the Neue Klasse in late 2025, while the Sedan will ramp up in Munich in 2026. Just one year later, additional production capacity will be available in Mexico – initially, for the Sports Activity Vehicle. The future high-voltage battery assembly at Plant San Luis Potosí, covering an area of more than 80,000 square metres, is key to integrating the Neue Klasse at the production site.

“The battery assembly in San Luis Potosí will be part of our global production network. For our new sixth-generation e-drive alone, we are building five locations on three continents,” explained Milan Nedeljković, member of the Board of Management of BMW AG responsible for Production, at the start of construction in Mexico. The BMW Group is committed to the “local for local” principle worldwide. “Locating battery factories close to vehicle manufacturing makes production more resilient.”

Close links between battery factory and vehicle production

In line with its “local for local” principle, the BMW Group locates its high-voltage battery assembly facilities worldwide as close as possible to its vehicle plants. In addition to the location in San Luis Potosí, assembly sites for sixth-generation high-voltage batteries are also being built in Debrecen (Hungary), Shenyang (China), Woodruff, near Spartanburg (USA) and Irlbach-Straßkirchen (Lower Bavaria). This approach safeguards production, even in the event of unforeseen political and economic developments. Existing locations are also being strengthened, securing jobs. The short distances involved reduce the carbon footprint of vehicle production.

The BMW Group will use its newly developed round cells for the first time in the Neue Klasse. This leap in technology will boost the energy density of cells by 20 percent and improve charging speed by up to 30 percent. Range will be extended by 30 percent. 

Further development of Plant San Luis Potosí

As well as integrating battery assembly, other changes are being made at Plant San Luis Potosí: Just under 20,000 square metres will be added to the body shop, resulting in a total area of over 90,000 square metres. Assembly and logistics areas are also being expanded by almost 10,000 square metres.

“With this further development of our site, we are also gearing up in Mexico for the launch of the next BMW model generation. As the first premium OEM producing fully-electric vehicles and high-voltage batteries in Mexico, we are at the forefront of our industry and, at the same time, continuing to reduce our environmental footprint,” said Harald Gottsche, president and CEO of BMW Group Plant San Luis Potosí.

Photovoltaic output to double

When it comes to efficient energy supplies, the BMW Group uses site-specific solutions at its locations around the world. “In Mexico, we are planning to expand the photovoltaic systems within the plant, to double the output from the solar panels,” said Nicole Haft-Zboril, Head of Real Estate Management at the BMW Group. “The plan is to generate more than 20 percent of the electricity we need at the moment – directly on the factory premises.” The wastewater treatment plant has also been expanded, with an investment of 3.3 million euros significantly increasing the reuse of treated wastewater.

Extensive skills development programme

BMW Group Plant San Luis Potosí is also stepping up its commitment to skills development, aimed at ensuring employees are highly qualified and prepared for the challenges of the future. Training will include topics such as safety awareness around production of high-voltage systems and the use of robotics in manufacturing processes.

The BMW Group plant in San Luis Potosí started production in 2019. Around 3,700 employees currently produce the BMW 3 Series Sedan as well as the BMW 2 Series Coupé and the BMW M2 models for the global market.

Rayong, Thailand. After a joint ground-breaking ceremony with Milan Nedeljković, Board Member for Production, representatives of the Thai government and the German ambassador to Thailand Ernst Reichel, construction work is underway for the BMW Group’s own local manufacturing facility for Gen-5 high-voltage batteries. With that, the BMW Group is readying yet another production facility to manufacture fully electric vehicles, with local BEV production scheduled to start in the second half of 2025.

“Local production of high-voltage batteries in Rayong is the next logical step in the continued electrification of our production network. Once again, the principle of ‘local for local’ applies, supporting economic development, employment opportunities and knowledge transfer in Thailand and the ASEAN region,” said Milan Nedeljković, Board Member for Production at BMW AG, at the ground-breaking ceremony.

The forthcoming high-voltage battery assembly facility will have a footprint of 4,000 square metres and is an important addition to the business activities of BMW Group Manufacturing Thailand. The new assembly line will convert imported battery cells into modules that will then be integrated into high-voltage batteries. The BMW Group has invested more than 1.6 billion baht (approx. 42 million euros) in the project, a significant share of which – almost 1.4 billion baht (approx. 36 million euros) – will be used to buy state-of-the-art equipment and systems.

The BMW Group has been producing high-voltage batteries in Thailand for locally made plug-in hybrids since 2019. Plant Rayong manufactures around two dozen BMW, MINI and BMW Motorrad models for the Thai as well as various ASEAN markets. In 2023 output totalled more than 12,000 cars and almost 11,000 motorcycles.

Comprehensive training programme

Employees will undergo comprehensive training programmes, which will be delivered in the global production network with the aim of improving the technical skills of local staff through knowledge transfer. The investment in professional training and development also underscores the BMW Group’s commitment to advancing the Thai economy.

Joint education programme with UNICEF – also in Thailand

As well as developing its own workforce, the BMW Group is very much involved in boosting industry in Thailand and the global transition to mobility solutions that help conserve resources. This year it is collaborating with UNICEF in Thailand to improve career opportunities for young people through a targeted STEM education programme, training and careers advice.

Steyr, Austria. The new halls for future e-drive production reached completion at the BMW Group site in Steyr. Construction began in September 2022, with the topping-out ceremony taking place exactly one year later. With some 60,000 square metres of production space, the 105 by 150-metre building was erected to a tight schedule. But now it’s standing. “The construction and installation of this production facility for Neue Klasse e-drives is running totally to plan. Now comes the next important stage, which is no less ambitious than the construction of the halls themselves,” explained Helmut Hochsteiner, head of electric drives at the BMW Group site in Steyr.

Approx. 300 items of plant and equipment worth over 500 million euros

Over the next few months, around 300 items of plant and equipment – many made to specification – will need to be installed, ready for pre-series production to launch as planned in July of this year. “The 300 machines are all shapes and sizes, from small, individual items to the over 30 metre-long ‘marriage’ station. Here, four robots and other systems will work in concert to fit the transmission to the main motor,” said Hochsteiner.

Klaus von Moltke, Senior Vice President of Engine Production at BMW AG and Plant Director of Steyr, outlined the economic dimensions of the project: “We are investing a total of more than 500 million euros in plant and equipment for Steyr, offering further confirmation of the BMW Group’s commitment to the site. Series production of e-drives for the Neue Klasse is scheduled for launch in the autumn of 2025.”

The first piece of plant was brought into the new assembly hall in the end of January. The ‘inaugural inhabitant’ is a crane that will lift power electronics components from the first floor – where inverter will be assembled in a clean-room – down to final assembly on the ground floor. Once the electronic parts have arrived, the inverter and e-drive will be ‘married’.

By 2030 the BMW Group will invest some 1 billion euros in total in e-drive production at its Steyr facility. The plant will manufacture over 600,000 e-drives a year alongside diesel and petrol units. Production of these will remain high as well, with combustion engines forming an important part of Steyr’s product portfolio well into the future.

Munich. A new era is dawning for BMW Group Plant Munich: from 2026, the iconic parent plant will produce the Neue Klasse sedan. Just one year later, the factory will manufacture nothing but all-electric models, making the Munich plant the first location in the BMW Group’s existing production network to have successfully completed the transformation to E-mobility from the end of 2027.

“The Munich plant is an excellent example of our ability to adapt. We are investing € 650 million here and will produce exclusively all-electric vehicles in our parent plant from the end of 2027,” says Milan Nedeljković, Member of the Board of Management of BMW AG, Production. “Last year alone, six all-electric models went into production. At the same time, we also set a production record, proving that we are simultaneously able to both deliver and shape the future in our production network.”

Peter Weber, Director BMW Group Plant Munich, adds: “Munich is the beating heart of BMW. The plant in Munich is innovative and adaptable. As in the 1960s, a Neue Klasse is again laying the foundation, on which our plant is reinventing itself. The fact that this comprehensive transformation is taking place at the same time as roughly 1,000 vehicles per day are currently being manufactured is common practice in Munich and is possible thanks to the outstanding performance of all our employees. We are delighted to be guiding the Munich plant into a fully-electric future – starting with the Neue Klasse sedan.”

Smooth transition to electromobility, as the era of combustion automobiles from Munich ends in 2027

BMW Group Plant Munich is a prime example of the fluent transition to the era of electromobility. In 2015, the first plug-in hybrid models from the BMW 3 Series were manufactured on the same production line as combustion vehicles. In 2021, the BMW i4 became the first all-electric vehicle to be produced on the same production line. Nowadays, every second vehicle that rolls off the production line has an all-electric drive system.

From 2026, production of the Neue Klasse in the Munich plant will initially run parallel to production of current models. A good year later, from the end of 2027, the BMW Group’s parent plant will be the first existing site in the global production network to manufacture exclusively all-electric vehicles, having been transformed accordingly. As such, the era of vehicles with combustion engines in Munich will draw to a close 75 years after the launch of the BMW 501 in 1952.

After the start in the new plant in Debrecen, Hungary, and in Munich, the Neue Klasse vehicles will also be produced in Shenyang, China, and San Luis Potosí in Mexico.

Extensive modifications offer long-term security for location

Over the course of a history stretching back more than 100 years, BMW Group Plant Munich has undergone many changes and repeatedly reinvented itself. Together with the conversion from manufacturing aircraft engines to automobile construction, the successful introduction of the Neue Klasse in the 1960s is a milestone in the list of changes throughout the company’s history.

At the moment, multiple large construction sites are evidence of the turnaround, as they pave the way for the arrival of the Neue Klasse from 2026. The € 650 million of investment comprises four buildings, including a new vehicle assembly line with logistics areas and a new body shop.

In order to create the space within the limited floor space at the plant in the heart of Munich, the traditional engine manufacturing has been moved to Hams-Hall in Great Britain and Steyr in Austria after roughly 70 years at the parent plant. 1,200 employees have been trained for different production strategies in Munich or have taken up employment at other locations in the production network.

As in the 1960s and all other changes since, the current transformation of BMW Group Plant Munich is taking place whilst production is still ongoing. Regardless of the construction work, roughly 1,000 cars roll off the production line every day, including BMW 3 Series and the BMW i4 – all on the same assembly line.

The extensive reorientation of the plant secures a long-term future for the site in Munich, and is also a significant investment in Bavaria as an industrial location.

Digitalisation at the Munich plant in accordance with the principles of BMW iFACTORY

The principles of BMW iFACTORY guarantee the utmost flexibility, excellent processes and outstanding integrability at all sites within the BMW Group – from the completely new plant in Debrecen to the parent plant in Munich, which is over 100 years old and at which the transformation is in full swing. BMW iFACTORY is synonymous with the superb production expertise throughout the entire production network. One important aspect is a comprehensive digitalisation with a holistic approach to the interaction between people, processes and systems. It optimises processes and supports employees with their work. The implementation takes place in three areas: data science, artificial intelligence (AI) and virtualisation.

Q: Mr. Lamp, we are here at the BCCC – close to the FIZ. Everything looks very much like a High-Tech Research Facility. Where does the BMW Group stand in terms of Battery Tech today?
I believe we are in a very good position. Like you said - we are here in our BCCC – close to the FIZ and we just opened our CMCC (Cell Manufacturing Competence Center) in Parsdorf. Combining BCCC for research and development of cell technology and CMCC for understanding and establishing the industrialization of the cell production with our experts from all over the world working there, bring us on eye level with the best battery cell producing companies in the world. Remembering our beginnings in 2008 with our first MINI Cooper BEV prototype – we have come a long way.

…and why do you think you were able to make it to this level of expertise?
I strongly believe that we have found the right strategy for BMW very early. And this strategy is rather simple: Develop the in-house competence in both critical fields: battery cell technology and large-scale battery production as fast and consequent as possible. And by doing this, enable BMW to put the best battery into their electrified vehicles.

Q: Mr. Vandeputte, after more than 25 years at Umicore you just started at BMW Group – what is your perspective on the BMW Battery Strategy?
When I was at Umicore we appreciated collaborating with BMW on battery technology, because of the clear strategy focusing on deep understanding and mastering of cell technology and cell production, as this is really the core of the automotive battery business.
Looking at the challenges an OEM faces today by the transformation of the industry – and taking into account the BMW promise to deliver the Ultimate Driving Machine to its customer: I believe the BMW approach is very convincing and clear.

Q3: And the step from a “material tech company” to a German Premium Car manufacturer – how does it feel?
It actually feels really good and energizing. Being part of this iconic BMW family is an honor and the very welcoming attitude of everybody for sure helps as well. Looking at the projects ahead the objectives are exciting and challenging at the same time. Whether our focus is battery performance, cost-competitiveness lowest environmental impact or a combination of these, we need to find optimal interplay of all materials in the cell, so this is back to active materials that I know well. And I worked in a very international, technology-driven environment at Umicore - and the same is true for my new role here at BMW.

Q: Mr. Lamp, talking about projects and challenges: what is the next big step customers can expect from BMW electrified powertrains?
A very significant step will come in our NEUE KLASSE models in 2025. This will be the starting point of what we call our Gen6 eDrive technology. At the heart of this technology will be our new cylindrical cell: 20 percent more volumetric energy density, 30 percent faster charging, 30 percent more range compared to the respective model featuring Gen5 technology.

…but changing from a prismatic cell in Gen5 to a cylindrical cell in Gen6 is a significant move: what triggered this decision?
At the beginning of the process we really started from a white sheet of paper and open to all cell formats and sizes. But with the ambitious performance and safety goals we soon came to the conclusion, that the cylindrical cell is the best format for our next generation. Also it fits best our integration approach for the NEUE KLASSE: cell to pack and pack to open body.

Q: Mr. Vandeputte, ASSB is often considered “the next big thing”. Where does BMW stand? What is the potential of the technology?
I believe we are on a very good path. With our partner Solid Power we are establishing a new process development line in our CMCC in Parsdorf. On this line we will work – in parallel to our partner in the US – on the next steps to bring this advanced battery technology in the car. This line will be up and running in Q2 of 2024. The potential of the technology is there: higher energy densities paired with at least equal safety as today.
But realistically speaking we will need some more years to mature the technology and make it ready for industrialization – not before the end of the decade.

Q: Looking at the automotive battery landscape today – very often new trends or even innovations are discussed in the media. How do you keep up with all developments?
KV: This is actually a very good point – and at the same time something that I have watched BMW doing for years: the close connection from the BMW battery team to the Start-Up scene as well as universities – this is in my opinion a very strong asset and an absolute necessity to be and stay a technology leader.

PL: I agree, and let me add: I believe it is a very strong asset in two ways. First, it ensures that we as BMW are in the loop in all new trends, findings and developments. And secondly, it helps us to find the best talents in the industry – this is one of many reasons why we are very optimistic regarding BMW battery cell technology in the coming years.

Gentlemen, thank you very much for this conversation.

In the event of enquiries please contact:
BMW Group Corporate Communications

Bernhard Ederer
Communication BMW Group Innovation, Powertrain Technologies
Mobile: +49-176-601-28556
E-Mail: Bernhard.Ederer@bmwgroup.com

Almut Stollberg
Head of Communication BMW Group Innovation, Design, Technology, Digital Car
Mobile: +49-151-601-96543
E-Mail: Almut.Stollberg@bmw.com

Please find attached the 09/2023 first time edition of the Sustainability Communication Backgrounder made by AK-31. The contents are for internal use only but may be passed further to any colleague who deals with sustainability issues. If you have questions concerning the content or handling just contact the editor. Changes are possible anytime.

Munich/Dubai. The vehicles in the BMW iX5 Hydrogen pilot fleet, which launched in February this year, have completed an intensive round of hot-weather testing in the United Arab Emirates for the first time. The car’s fuel cell drive system performed impressively in the face of temperatures rising to 45°C, as well as sand and dust, varying gradients and significant fluctuations in humidity.

The highly efficient fuel cell system, the two hydrogen tanks, the electric motor and the power battery teamed up with the central vehicle control unit to demonstrate their outstanding performance and state of readiness. The Munich-based development team examined both the functionality of all the electric systems under the extreme conditions and the provision of the cooling power to enable the full performance of the vehicle. The vehicles were able to ensure the driving dynamics for which BMW is renowned.

The BMW iX5 Hydrogen goes around the world
Vehicles from the pilot fleet are currently in action in Europe, Japan, Korea, China, the USA and the Middle East. The aim is to shine a spotlight on the everyday usability of hydrogen-powered vehicles, and beyond that to gain important knowledge for the development of a potential series-produced model. The BMW Group is using the pilot fleet to provide support on a regional level for the development of a refuelling infrastructure which can be used with 700-bar refuelling technology across all categories of vehicle – from passenger cars and small vans to buses and heavy-duty commercial vehicles. Synergies between different areas of application also offer important scope for developing a strong network of suppliers in hydrogen technology and reducing costs.

The BMW iX5 Hydrogen combines long-distance capability and short refuelling stops with locally emission-free driving. Provided the relevant framework is in place, the hydrogen fuel cell technology has the potential to serve as another pillar in the BMW Group’s future drive system portfolio.

As part of its ongoing transformation, the BMW Group is applying a “technology-open” approach when it comes to drive systems. The company is therefore adapting to different customer requirements, infrastructure standards and political and regulatory landscapes in the various regions of the world. This flexibility puts the BMW Group in the position to respond quickly to changing requirements in the markets in any situation and to present an attractive offer for as many customers as possible at all times.

The BMW iX5 Hydrogen has a fuel cell system generating output of 125 kW/170 hp and a highly integrated drive unit using fifth-generation BMW eDrive technology (the electric motor, transmission and power electronics are grouped together in a compact housing). The output of the overall drive system is 295 kW / 401 hp. The hydrogen needed to power the fuel cell is stored in a pair of 700-bar tanks made from carbon-fibre-reinforced plastic (CFRP). Together, these tanks can hold around six kilograms of hydrogen. This storage capacity gives the BMW iX5 Hydrogen a range of 504 km (313 miles) in the WLTP cycle. 

Munich. At the IAA Mobility 2023 international motor show in Munich, the BMW Group will be presenting the most recent highlights of its ongoing transformation in the key action areas of electrification, digitalisation and circularity. The latest new models with electrified powertrains from the BMW, MINI and BMW Motorrad brands, plus Vision Vehicles and concepts for individual mobility in tomorrow’s world all serve to underline the company’s innovative strength in these fields. As the dawn of a new era in personal mobility approaches, the BMW Group is set to unveil its latest highlight, the BMW Vision Neue Klasse, which brings together the Group’s development expertise in the three crucial disciplines for the future of mobility.

The IAA Mobility show is being staged in Munich for the second time. For the BMW Group and its brands, this provides an excellent opportunity to enter into constructive dialogue on the future of individual mobility with local people, as well as with visitors to the show from outside Munich and other stakeholders. The IAA Mobility Summit at the exhibition centre and the BMW Group’s Open Space at Max-Joseph-Platz in the heart of Munich will be the main arenas where BMW, MINI and BMW Motorrad present their new products on 5 – 10 September 2023. Among the models visitors can acquaint themselves with here alongside the BMW Vision Neue Klasse is the fully electric BMW i5. And they can also experience the world premieres of the new fully electric MINI Cooper, new fully electric MINI Countryman and BMW CE 02 eParkourer.

Electric, digital, circular – the focus areas of the BMW Group.

The BMW Group’s presence at IAA Mobility 2023 revolves around the company’s rigorous focus on electric, digital and circular mobility for the future and the latest progress it has made in these areas. The BMW Vision Neue Klasse is joined by a selection of new models from across the Group’s brands whose electrified powertrains, digital innovations and resource-efficient manufacturing illustrate the ongoing process of change in a variety of ways.

The new products poised for launch by the BMW brand include the plug-in hybrid variants of the new BMW 5 Series. The new BMW i7 Protection – the first ever all-electric protection vehicle in the luxury sedan segment – is also making its debut at IAA Mobility 2023.

MINI is unveiling the members of the brand’s new model family for the first time with the help of two world premieres: the new fully electric MINI Cooper and new fully electric MINI Countryman will both be on show at the Open Space site. A new model with all-electric drive also forms the centrepiece of BMW Motorrad’s line-up at Max-Joseph-Platz. Conceived as a compact eParkourer with a trailblazing design, the new BMW CE 02 injects fresh impetus into the urban mobility scene.

Locally emission-free mobility sets the theme for the models on show.

The IAA Mobility show will be officially opened on 5 September at Munich’s exhibition centre. The BMW Group will be represented at its stand in Hall A2, where the BMW Vision Neue Klasse will be unveiled to kick off the event. The BMW i7 Protection all-electric protection vehicle will also be presented for the first time at the IAA Mobility Summit.

The IAA Mobility Summit is taking place under the banner “Experience Connected Mobility” and is aimed primarily at trade visitors. It will showcase trends and technological innovations for future mobility over the course of numerous talks, presentations and panel discussions. One of the central topics is the use of hydrogen as an energy source for current and future vehicles. BMW is carrying out pioneering work in this field with its development and practical testing of a Sports Activity Vehicle with a hydrogen-powered fuel-cell drive system. The BMW iX5 Hydrogen is also being exhibited at the Summit.

Locally emission-free mobility is also the dominant theme for the models awaiting visitors to the Open Space site. BMW has at least one purely electrically powered representative in all relevant model segments. The brand is presenting its entire line-up to the public, ranging from the BMW iX1 compact Sports Activity Vehicle via the BMW i4 and BMW i5 to the BMW iX and the BMW i7 luxury sedan.

The Open Space at Max-Joseph-Platz can be visited free of charge on 5 – 9 September from 10 a.m. to 10 p.m. and on Sunday 10 September from 10 a.m. to 5 p.m. In addition, BMW Welt will continue to provide an attractive destination for all automotive enthusiasts during IAA Mobility 2023. The current model portfolios of the BMW, MINI, Rolls-Royce and BMW Motorrad brands are presented here, along with the latest BMW and MINI Lifestyle collections. Plus, starting on 2 September 2023, BMW Lifestyle together with BMW M GmbH will be running a GOODS WITH FREUDE pop-up store in the Hofstatt shopping centre at No. 10 Sendlinger Straße. Located just a few minutes’ walk away from the Open Space, the store will feature both familiar lifestyle articles and the new BMW Lifestyle collection.

World premiere: the BMW Vision Neue Klasse.

At IAA Mobility 2023, the BMW Group is offering visitors a preview of the Neue Klasse – the forthcoming generation of models from BMW. The BMW Vision Neue Klasse brings together innovations from the areas of electrification, digitalisation and circularity in signature BMW style. The Vision Vehicle takes design, control/operation, efficiency and sustainability into a whole new dimension – one that it will be possible to experience on the road before long.

During IAA Mobility 2023, the BMW Vision Neue Klasse will be on show at both the Summit and the Open Space. The new Vision Vehicle incorporates the latest innovations in the BMW Group’s key future-focused fields. It therefore builds on the BMW i Vision Circular and the BMW i Vision Dee – which have already demonstrated the BMW Group’s development expertise in the areas of circular economy and digitalisation – and combines their qualities with further new developments in exterior and interior design, user experience and powertrain and battery technology.

World premiere: the plug-in hybrid variants of the new BMW 5 Series Sedan.

As well as the all-electric BMW i5, the brand is exhibiting two other model variants with electrified powertrains at IAA Mobility 2023. As early as spring 2024, two models featuring state-of-the-art plug-in hybrid technology will be added to the new BMW 5 Series Sedan range. Their six-cylinder and four-cylinder in-line petrol engines from the new modular generation of Efficient Dynamics units will each be combined with the latest BMW eDrive technology for plug-in hybrid systems. This will result in a notable increase in output and much sharper power delivery, while also significantly improving efficiency and electric range compared to the outgoing model generation.

The electric motor purpose-developed for the new plug-in hybrid system is integrated into the eight-speed Steptronic Sport transmission together with its power electronics. The highly integrated drive unit contributes up to 145 kW/197 hp to the maximum combined output of 360 kW/489 hp in the case of the new BMW 550e xDrive Sedan (fuel consumption combined: 1.1 – 0.8 l/100 km [256.8 – 353.1 mpg imp]; electric power consumption combined: 22.5 – 20.1 kWh/100 km; CO₂ emissions combined: 24 – 19 g/km in WLTP cycle, provisional figures) and 220 kW/299 hp for the new BMW 530e Sedan (fuel consumption combined: 0.8 – 0.6 l/100 km [353.1 – 470.8 mpg imp]; electric power consumption combined: 21.4 – 18.9 kWh/100 km; CO₂ emissions combined: 19 – 14 g/km in WLTP cycle, provisional figures).

A BMW-patented innovation has been used to enhance the electric motor’s power delivery in the new plug-in hybrid models: a pre-gearing stage enables the nominal torque of 280 Nm (206 lb-ft) to be increased to effective torque of up to 450 Nm (332 lb-ft) at the transmission input for the motor. The compact electric motor is therefore able to boost torque by an amount that would normally only be possible using a larger unit and makes a clear difference both when accelerating off the line and putting in a rapid burst of speed. Electric range is now up to 79 – 90 kilometres (49 – 56 miles) in the WLTP cycle for the new BMW 550e xDrive Sedan and 87 – 101 kilometres (54 – 63 miles) in the WLTP cycle for the new BMW 530e Sedan.

The lithium-ion high-voltage battery’s space-saving positioning within the vehicle’s underbody has a beneficial effect on both the car’s centre of gravity and the capacity of its luggage compartment, which holds a total of 520 litres in the plug-in hybrid models – meaning it is just as large as that offered by their purely combustion-engined siblings. The usable energy provided by the high-voltage battery has climbed to 19.4 kWh. At the same time, maximum charging capacity has doubled compared to the outdoing models and now stands at 7.4 kW, enabling the high-voltage battery to be fully recharged from empty in 3.0 hours. When hooked up to a conventional domestic power socket, a full vehicle charge is completed in 9.8 hours.

World premiere: the BMW i7 Protection.

BMW is presenting a new generation of protection vehicles in the luxury sedan segment at the IAA Mobility 2023 show. The new BMW i7 Protection (electric power consumption combined in WLTP cycle: 30.0 kWh/100 km, provisional figure) is absolutely unique in this segment, as it is the world’s first ever certified protection sedan with an all-electric drive system. Driven by two powerful electric motors, it meets all the requirements of class VR9 protection without any limitations, as does the new V8-engined BMW 7 Series Protection (fuel consumption combined in WLTP cycle: 14.6 l/100 km [19.3 mpg imp]; CO₂ emissions: 328 g/km, provisional figures).

Both models blend the integrated protection concept channelled into the development of the new BMW 7 Series range with outstanding levels of ride comfort and spaciousness, advanced equipment features and the unbeatable dynamic prowess for which BMW is renowned. The concept centres around the new and unique BMW Protection Core, which forms a self-supporting body structure made from armour steel. This is then combined with features such as additional armouring for the underbody and roof, plus armoured glass. The result is customised protection from attacks with firearms or explosives for at-risk individuals. The glass in the new protection vehicles even meets the requirements for the highest class of civilian protection, VPAM 10.

The all-electric BMW i7 Protection is equipped with one electric motor at the front axle and another at the rear. Together they generate a combined output of 400 kW/544 hp and maximum combined torque of 745 Nm (549 lb-ft), and create an electric all-wheel-drive system. The new BMW i7 Protection sprints to 100 km/h (62 mph) from rest in 9.0 seconds, while top speed is electronically limited to 160 km/h (99 mph). The instantaneous, precisely orchestrated power delivery from the two motors guarantees exceptional traction and directional stability even when the car is being driven hard and performing challenging manoeuvres, such as when escaping from an attack.

Tuned and optimised specifically for this model, the chassis technology also makes allowance for the additional weight of its armouring, resulting in superbly assured performance in any situation. Another unique offering for this segment is the inclusion of Integral Active Steering as standard. This reduces the car’s turning circle, increases agility when cornering at speed and improves driving comfort for rear-seat passengers. The 20-inch light-alloy wheels are a further standout feature. The PAX tyres that also come as standard allow the car to continue its journey at up to 80 km/h (50 mph) even in the event of a total loss of pressure.

The latest generation of BMW iDrive based on BMW Operating System 8.5 is fitted, complete with the BMW Curved Display. The system is intuitive to use and operates in a way familiar to BMW drivers. The special functions relevant to occupant protection are also operated via BMW iDrive. The new protection vehicles can also be tailored precisely to any purpose, with items including a fresh-air supply system, a fire extinguishing system, flashing lights, radio transceivers and flag poles for when the car is on official duty, plus other special customer-specific options.

Trailblazing: the BMW iX5 Hydrogen.

The BMW iX5 Hydrogen presented at IAA Mobility 2023 provides further evidence of the company’s superlative innovative strength in the field of drive technology. A pilot series of the Sports Activity Vehicle with hydrogen fuel-cell drive, developed on the basis of the current BMW X5, has entered service for demonstration and test purposes with various target groups around the world. This allows selected test groups who haven’t been involved in the development process to get behind the wheel of the BMW iX5 Hydrogen and gain a direct impression of its attributes for the first time.

The BMW iX5 Hydrogen is equipped with the latest, fifth generation of BMW eDrive technology. The highly integrated drive unit at the rear axle draws its energy from a high-performance battery with li-ion technology that was specially developed for the hydrogen fuel-cell vehicle and generates maximum output of 295 kW/401 hp. The electric motor also doubles as a generator that feeds energy back into the high-performance battery on the overrun or under braking.

The model’s two 700-bar tanks made from carbon-fibre-reinforced plastic (CFRP) together hold six kilograms of gaseous hydrogen and can be refilled in three to four minutes. A chemical reaction takes place in the fuel cell system between the hydrogen and oxygen from the air, through which the electric power for the electric motor is generated. The BMW iX5 Hydrogen achieves a range of 504 kilometres (313 miles) in the WLTP cycle without having to refill the tanks. The hydrogen-powered SAV completes the 0 to 100 km/h (62 mph) sprint in under six seconds and goes on to reach a top speed in excess of 180 km/h (112 mph).

The BMW iX5 Hydrogen combines long-distance capabilities and short refuelling stops with zero tailpipe emissions and hallmark BMW driving dynamics. Its hydrogen fuel-cell technology has the potential – provided the necessary basic conditions are in place – to serve as an additional pillar in the BMW Group’s future powertrain portfolio. As part of its ongoing transformation, the BMW Group is following an approach that embraces all technologies when it comes to drive systems. The company is therefore readying itself for differing customer requirements, infrastructure standards and political and regulatory frameworks in the various regions of the world. This degree of flexibility puts the BMW Group in a position to react quickly to changing requirements in the markets in any situation and to present as many customers as possible with an appropriate model offering at all times.

Dingolfing. The new BMW 5 Series, including the all-new fully-electric BMW i5, celebrated the official start of production today at BMW Group Plant Dingolfing, in the presence of Bavarian Minister-President Markus Söder. The site in Lower Bavaria, which is celebrating 50 years of BMW automotive production in 2023, has now ramped up its third fully-electric model in two years, following the BMW iX and BMW i7. Pure battery-electric vehicles’ share of total production at the BMW Group’s largest European manufacturing location is projected to increase to over 40 percent next year.

Milan Nedeljković, member of the Board of Management of BMW AG responsible for Production, explained in Dingolfing today: “The BMW i5 and our plant in Dingolfing are perfect examples of how the BMW Group is transforming itself for e-mobility and developing our plants on the road to the BMW iFACTORY. E-mobility is the new normal at our plants worldwide. Between 2021 and 2024, we will have integrated a total of 15 fully-electric vehicles into our production network.”

To achieve this, the BMW Group is relying on flexible architectures and offering most of its models to customers around the world with different drive train variants. The BMW 5 Series – like the BMW 7 Series and BMW X1 before it – will be available with a fully-electric drive train or internal combustion engine, or as a plug-in hybrid. This requires a high degree of flexibility, but allows the company to utilise its plants’ capacity efficiently and adjust its offering to customer demand. Nedeljković: “We are following the market. Customer requirements determine what the actual drive train mix looks like.” This has been made possible by extensive investments in the production network. The BMW Group has invested more than one billion euros in integrating the BMW iX, BMW 7 Series and BMW 5 Series at the Dingolfing vehicle plant.

As Dingolfing's core model, BMW 5 Series injects new impetus

Over the next few years, Plant Director Christoph Schröder expects the launch of the new BMW 5 Series to boost the plant’s production numbers: “The BMW 5 Series has traditionally been Dingolfing’s core model and will provide valuable impetus for volumes again this time.” In 2022, more than 280,000 vehicles came off the assembly line at Plant Dingolfing. Over the coming year, with the start of production for the BMW 5 Series Touring and the eighth-generation BMW M5 models, Schröder expects that number to climb to well over 300,000 vehicles. Stefan Danner, Deputy Chairman of the Dingolfing Works Council, adds: “Along with the successful transition to e-mobility, the BMW 5 Series is central to long-term capacity utilisation at our plant, as well as securing jobs.”

50 years of BMW cars from Dingolfing

Of the roughly 12 million BMW vehicles built at the location to date, a total of eight million, i.e. two thirds, are BMW 5 Series models. This is closely tied to the history of Plant Dingolfing. Exactly 50 years ago, back in September 1973, the very first BMW car rolled off the production line at the new vehicle plant – a first-generation tangerine-coloured BMW 520i. Since then, the plant in Lower Bavaria has become one of the most prominent locations in the automotive industry – and an engine for economic development in the region. The annual wage bill for the more than 18,000 BMW employees in Dingolfing is over one billion euros, and the plant contracts with around 1,000 suppliers from Lower Bavaria. In addition to investing in the Dingolfing vehicle plant, the BMW Group has also channelled more than one billion euros into production of electric powertrain components at the location since 2015.

The vision of the BMW iFACTORY

As with the decision to build Plant Dingolfing during the oil crisis of the early 1970s, the entrepreneurial vision of the BMW Group is still very much in evidence at the site today. Thanks to extensive investment, Plant Dingolfing is extremely well equipped for the future – and the transition to the BMW iFACTORY is tangible. The best example of this development in the areas of "lean" and "digital" is winning the renowned Automotive Lean Production Award in 2022. The Technology Assembly was recognised for the rollout of intelligent camera systems for quality monitoring (AIQX), for example, as well as smart logistics solutions and the IT platform IPS-i for identification and localisation of objects. Last year, the plant also piloted Automated Driving In-Plant (AFW), deploying the new BMW 7 Series along routes between the assembly hall and the finish area. This is being rolled out on a larger scale with the launch of the new BMW 5 Series.

In the field of sustainability – the “green” aspect of the BMW iFACTORY – the site has stepped up its activities in different areas in recent years: from promoting biodiversity on plant grounds, to preventing and recycling waste so only around 600 grams of waste for disposal remain per vehicle produced, up to and including decarbonisation measures. In addition to sourcing green power, the location has also signed a far-reaching contract for the supply of locally-produced heat from regional biomass for heating purposes. This will meet around half the plant’s process hot water requirements from the middle of the decade onwards, reducing its CO₂ emissions by 10-15% as a result.

Important decisions for the future

Nedeljković sees the recent investments in the transformation of Dingolfing and the other Bavarian plants as a firm commitment on the part of the BMW Group to Bavaria as a manufacturing location: “Nine out of ten BMW vehicles produced are sold to customers outside of Germany these days. Despite this, we still have more than half our employees here, especially in Bavaria – and, for all the internationalisation needed to achieve globally balanced growth, Bavaria remains an important pillar of the BMW Group and its production network.”

Munich / Antwerp. The BMW Group is presenting international media representatives with the first vehicles in a pilot fleet that will go into service this year. After four years of development work, the BMW iX5 Hydrogen vehicle and development project is entering its critical next phase.

The fleet of under 100 vehicles will then be employed internationally for demonstration and trial purposes for various target groups. This active driving experience will therefore be the first chance for people not involved in the development process to gain a direct impression of what the BMW iX5 Hydrogen has to offer.

“Hydrogen is a versatile energy source that has a key role to play in the energy transition process and therefore in climate protection. After all, it is one of the most efficient ways of storing and transporting renewable energies”, said Oliver Zipse, Chairman of the Board of Management of BMW AG. “We should use this potential to also accelerate the transformation of the mobility sector. Hydrogen is the missing piece in the jigsaw when it comes to emission-free mobility. One technology on its own will not be enough to enable climate-neutral mobility worldwide.”

The BMW iX5 Hydrogen.
The BMW iX5 Hydrogen developed on the basis of the current BMW X5 was first unveiled as a concept at the IAA show in 2019. Initial prototypes were then made available at the IAA Mobility 2021 for visitors to experience in action as shuttle vehicles.

Its hydrogen fuel cell system is further proof of the BMW Group’s leading development expertise in the field of electric drive technologies. The BMW Group is systematically pushing forward with development of hydrogen fuel cell technology as an additional option for locally emission-free individual mobility in the future.

BMW’s technological expertise.
The BMW Group produces the highly efficient fuel cell systems for the pilot fleet at its in-house competence centre for hydrogen in Munich. This technology is one of the core elements in the BMW iX5 Hydrogen and generates a high continuous output of 125 kW/170 hp.

A chemical reaction takes place in the fuel cell between gaseous hydrogen from the tanks and oxygen from the air. Maintaining a steady supply of both elements to the fuel cell’s membrane is of crucial importance for the drive system’s efficiency. In addition to the technological equivalents of features found on combustion engines, such as charge air coolers, air filters, control units and sensors, the BMW Group also developed special hydrogen components for its new fuel cell system. These include the high-speed compressor with turbine and high-voltage coolant pump, for instance.

The BMW Group sources the individual fuel cells from the Toyota Motor Corporation. The two companies have enjoyed a partnership characterised by trust for many years and have been collaborating on fuel cell drive systems since 2013.

Fuel cell systems are manufactured in two main steps, based on the individual fuel cells. The cells are first assembled into a fuel cell stack. The next step involves fitting all the other components to produce a complete fuel cell system.

Stacking of the fuel cells is largely a fully automated process. Once the individual components have been inspected for any damage, the stack is compressed by machine with a force of five tonnes and placed in a housing. The stack housing is manufactured in the light metal foundry at BMW Group Plant Landshut using a sand casting technique.

For this, molten aluminium is poured into a mould made from compacted sand mixed with resin in a process specially designed for this small-series vehicle.

The pressure plate, which delivers hydrogen and oxygen to the fuel cell stack, is made from cast plastic parts and light-alloy castings, also from the Landshut plant. The pressure plate forms a gas-tight and water-tight seal around the stack housing.

Final assembly of the fuel cell stacks includes a voltage test along with extensive testing of the chemical reaction within the cells. Finally, all the different components are fitted together in the assembly area to produce the complete system.

During this system assembly stage, further components are fitted, such as the compressor, the anode and cathode of the fuel-cell system, the high-voltage coolant pump and the wiring harness.

In combination with a highly integrated drive unit using fifth-generation BMW eDrive technology (the electric motor, transmission and power electronics are grouped together in a compact housing) at the rear axle and a power battery with lithium-ion technology developed specially for this vehicle, the powertrain channels maximum output of 295kW / 401 hp onto the road. In coasting overrun and braking phases, the motor also serves as a generator, feeding energy back into a power battery.

Production at Munich pilot plant.
The BMW iX5 Hydrogen is being built in the BMW Group’s pilot plant at its Research and Innovation Centre (FIZ) in Munich. This is the interface between development and production where every new model from the company’s brands is made for the first time. Around 900 people work there in the body shop, assembly, model engineering, concept vehicle construction and additive manufacturing.
They are tasked with ensuring that both the product and the manufacturing process are ready for series production. In the case of the BMW iX5 Hydrogen, specialists in hydrogen technology, vehicle development and initial assembly of new models have been working closely together to integrate the cutting-edge drive and energy storage technology.

Hydrogen allows rapid re-fuelling.
The hydrogen needed to supply the fuel cell is stored in two 700-bar tanks made of carbon-fibre reinforced plastic (CFRP). Together these hold almost six kilograms of hydrogen, enough to give the BMW iX5 Hydrogen a range of 504 km (313 miles) in the WLTP cycle. Filling up the hydrogen tanks only takes three to four minutes – so the BMW iX5 Hydrogen can also provide the driving pleasure for which BMW is renowned over long distances, with just a few, short stops along the way.

Summary of the technical data, performance, fuel consumption and range figures for the BMW iX5 Hydrogen:

Maximum output of overall drive system: 295 kW/401 hp
Electric continuous output of the fuel-cell system: 125 kW/170 hp
Maximum output of the battery (lithium-ion technology): 170 kW/231 hp
Maximum output of the highly integrated electric drive unit: 295 kW/401 hp
Capacity of the hydrogen tanks: 6 kg hydrogen (gaseous)
Acceleration 0-100 km/h (62 mph) < 6 s
Top speed: Over 180 km/h (112 mph)
Hydrogen consumption in the WLTP cycle: 1.19 kg/100 km
Range in the WLTP cycle: 504 km (313 miles)

FCEV technology contributes to decarbonisation.
The BMW Group is the first German carmaker to have joined the “Business Ambition for 1.5°C campaign” led by the Science Based Targets initiative and is committed to achieving the goal of full climate neutrality throughout the value chain.

The next step in this process involves the BMW Group’s plan to reduce CO₂ emissions per vehicle over its full lifecycle – i.e. supply chain, production and use phase – by at least 40 per cent by 2030 compared with 2019.

The BMW Group sold more than 215,000 fully electric vehicles worldwide in 2022, which represents an increase over the previous year of almost 108 per cent. Fully electric vehicles accounted for just under 9 per cent of total sales volumes last year, and this share is set to increase to 15 per cent in 2023.

By 2030 at the latest, the BMW Group is looking to reach a situation where fully electric vehicles claim a more than 50 per cent share of its overall sales.

The BMW Group views FCEV technology expressly as a potential addition to the drive technology used by battery-electric vehicles.

Hydrogen as part of global activities for CO₂-free mobility.
According to a report by the International Energy Agency (IEA), hydrogen offers considerable potential as a future energy source in connection with global energy transition activities. Thanks to its storage and transport capabilities, hydrogen can be used for a wide variety of applications.
Most industrialised countries are therefore adopting hydrogen strategies and backing them up with roadmaps and concrete projects. In the transport sector, hydrogen can become a further technology option, alongside battery-electric mobility, for shaping sustainable individual mobility in the long term.

However, this will depend on competitive production of sufficient quantities of hydrogen from green power, as well as expansion of the corresponding filling infrastructure, which is already being intensively pursued in many countries.

The BMW Group welcomes and supports activities to promote innovation in Germany and Europe that will help build a hydrogen economy and accelerate production of green hydrogen. These specifically include the large-scale hydrogen projects classified as Important Projects of Common European Interest (IPCEI).

The projects that comprise this European Union initiative, supported in Germany by the Federal Ministry of Economic Affairs and the Federal Ministry of Transport, span the entire value chain – from hydrogen production to transport to applications in industry.

With the right conditions, hydrogen fuel cell technology has the potential to become a further pillar in the BMW Group’s drive train portfolio for local CO₂-free mobility.

Regensburg. Today’s start of production for the fully-electric BMW iX1* in Regensburg illustrates the pace with which the BMW Group is ramping up electromobility. As announced almost two years ago, all German plants can now produce electric cars. The smallest model among the BMW Sports Activity Vehicles will boost the volume of electric vehicles. Milan Nedeljković, member of the Board of Management of BMW AG responsible for Production, already announced the next milestone at the start of production: “We are delivering the goods. By 2024, at least one in three BMWs coming out of our Bavarian plants will be an electric car.” Further proof, then, that the BMW Group is systematically implementing its electrification strategy, relying on speed and short distances. The high-voltage battery in the BMW iX1* also comes from Regensburg.

Bavarian Minister of Transport Christian Bernreiter: “Bavaria is Germany’s number-one state for cars and has a long tradition of building vehicles. However, that success doesn’t just lie in the achievements of the past, but also in research, development and innovation. The BMW iX1* and its high-voltage battery underline that BMW can master the future. That this fully-electric car will come off the production line in Regensburg also represents a strong commitment to Bavaria as a car-building location.”

The start of production for the new BMW iX1* means BMW Group Plant Regensburg is now manufacturing all drive technologies on a single line as part of its flexible production process – for combustion-engine, plug-in hybrid and fully-electric models. According to Carsten Regent, head of BMW Group Plant Regensburg: “The electrification and transformation of the plant gives me optimism for the future. Our aim now – also with the new BMW iX1* – is to continue to impress customers all over the world with cars made in Regensburg.”

BMW iFACTORY: Digital twin of Plant Regensburg

Lean, green, digital: With its BMW iFACTORY, the BMW Group is setting new standards and defining the future of automotive production. This is also evident at the Regensburg location, where the plant is a trailblazer for digitalisation. As part of a recent pilot project, the plant was digitally mapped. The resulting digital twin enables highly efficient planning of future plant structures and production facilities. The plant’s paint shop, for instance, relies on artificial intelligence: Paint surfaces are scanned to ensure flawless quality and then finished using a fully-automated programme customised for each vehicle to deliver a perfect customer experience. Artificial intelligence is also used in vehicle assembly at Plant Regensburg – specifically, AI-supported image recognition methods that assist employees with quality inspections. The AIQX (Artificial Intelligence Quality Next) computer system that is used for this learns to recognise objects such as a person from sample images, making it a useful supplement to conventional, camera-based quality inspections.

Predictive maintenance ensures that technical faults, e.g. in conveyor systems, are detected early, before system downtimes can occur. Installations and machinery are monitored through automated evaluation of process data.

Short distances: high-voltage battery from neighbouring production facility

Avoiding consumption and conserving resources: The BMW iFACTORY is also about ensuring short distances for logistics. “The close link between component and vehicle production is part of our strategy,” says Markus Fallböhmer, head of Battery Production at the BMW Group. The company is moving at a rapid pace, especially considering that the first of five coating lines for battery cells only went on-stream at the Regensburg electric component production facility in April 2021. “We put our new high-voltage battery assembly line into service in October. Now, we are already supplying the neighbouring vehicle plant with high-voltage batteries for the BMW iX1*,” explained Fallböhmer. By the end of the year, over 400 employees will be working in electric component production at the 45,000- square-metre facility in Regensburg.

1.6 billion euros invested in electric components at German sites to date

By the end of 2022, the BMW Group will have invested a total of more than 1.6 billion euros in electric component production at its German locations in Dingolfing, Leipzig and Regensburg. More than 3,300 employees currently work in BMW Group electric component production at those sites.

Spartanburg (USA)/Munich. The BMW Group continues the roll-out of its electromobility plan with a new investment in the U.S. to expand Plant Spartanburg and the company’s manufacturing footprint in the U.S. BMW Group Chairman of the Board of Management, Oliver Zipse, announced today a $1.7 billion investment in its U.S. operations, including $1 billion to prepare for the production of electric vehicles at the company’s existing U.S. manufacturing facility in South Carolina, and $700 million to build a new high-voltage battery assembly facility in nearby Woodruff, SC. By 2030 BMW Group will build at least six fully electric models in the U.S.

Zipse was joined today at Plant Spartanburg by South Carolina Governor Henry McMaster, Secretary of Commerce Harry Lightsey III, Chairman of Spartanburg County Council Economic Development Committee, David Britt, and Woodruff, SC Mayor, Kenneth Gist as he also announced an agreement to source next generation lithium-ion battery cells from Envision AESC, which will build a new plant in the state.

“For decades, Plant Spartanburg has been a cornerstone of the global success of the BMW Group. The home of the BMW X models that are so popular all over the world. Going forward, it will also be a major driver for our electrification strategy, and we will produce at least six fully electric BMW X models here by 2030. That means: The ‘Home of the X’ is also becoming the ‘Home of the Battery Electric Vehicle’,” said Zipse on Wednesday. “In addition, we can showcase BMW Group’s ‘local for local’ principle: Our newly developed sixth generation battery cells, which were specifically designed for the next generation electric vehicles, will be sourced here in South Carolina – where X goes electric.”

Envision AESC Battery Cell Plant in South Carolina to Supply Plant Spartanburg

In line with the principle of "local for local,” the BMW Group aims to purchase battery cells for its electric vehicles where production takes place. The company has found a partner in Envision AESC, which will build a new battery cell factory in South Carolina, to supply Plant Spartanburg. Envision will produce newly developed round lithium-ion battery cells, which were specifically designed for the sixth generation of BMW eDrive technology, and will be used in the next generation electric vehicles. The annual capacity of the battery cell factory will be up to 30 GWh.

The new battery format will increase energy density by more than 20 percent, improve charging speed by up to 30 percent and enhance range by up to
30 percent. At the same time, CO₂ emissions from cell production will be reduced by up to 60 percent through the partial use of secondary lithium, cobalt and nickel material, as well as renewable energy for production. 

The cooperation with Envision AESC is an important step in the BMW Group's plan to strengthen its regional supply chains. The expansion of electric vehicle production in combination with a local battery cell factory will lead to the creation of new supply chains, new networks for sub-suppliers, and new jobs throughout the entire region.

BMW Group has already announced that four additional battery cell factories will be built in Europe and China to meet its demand for next generation battery cells. The cell factories are being built by partners and will each have an annual capacity of up to 20 GWh.

Increased Investment and Expanded Manufacturing Capacity in SC

Of the new $1.7 billion investment announced today, $700 million will be used to build a new high-voltage BMW battery assembly center in Woodruff, SC, near Plant Spartanburg. The new facility will encompass over 1 million sq. ft., and produce next generation batteries for fully electric vehicles. Around 300 new jobs will be created on site.  

Plant Spartanburg currently produces lithium-ion battery modules for the two plug-in hybrid electric vehicles built at the plant, the BMW X3 xDrive30e (fuel consumption combined: 2.6-2.0 l/100 km WLTP; power consumption combined: 20.5-18.9 kWh/100 km WLTP, CO₂ emissions combined: 59-45 g/km WLTP) and BMW X5 xDrive45e (fuel consumption in l/100 km combined: 1.7-1.2 WLTP; power consumption in kWh/100 km combined: 27.7-24.3 WLTP; CO₂ emissions in g/km combined: 39-27 WLTP.). In 2021, nearly 70,000 electrified BMWs were built on site. The site in Woodruff will also leverage the experience and expertise developed in Plant Spartanburg’s existing operations at the new facility.

“BMW’s sustained and impactful presence in South Carolina demonstrates the power of partnership and shared commitment to our state’s automotive industry success,” said Governor McMaster. “With today’s announcement of a $1 billion expansion to Plant Spartanburg for manufacturing electric vehicles as well as $700 million for a new plant in Woodruff to assemble battery units, the road to the future is here. And I applaud BMW on helping lead the way.”

BMW Group Plant Spartanburg

Plant Spartanburg was established 30 years ago and began producing vehicles two years later. Since then, the plant has become the global center of competence for BMW Sports Activity Vehicles and a critical component of the company’s global production network. The plant currently represents an investment of nearly $12 billion, employs more than 11,000, and has an annual capacity of up to 450,000 vehicles. To date more than six million BMW vehicles have been built in the U.S. – for the U.S. and global markets. Based on this strength, BMW has been the largest automotive exporter from the U.S. by value for the past eight years.

Plant Spartanburg currently produces 11 models including the BMW X3, X4, X5, X6 and X7 Sports Activity Vehicles, four BMW M models and two plug-in hybrid electric models. Production of the all-new hybrid-electric BMW XM (fuel consumption in l/100 km combined: 1.6-1.5 WLTP; power consumption in kWh/100 km combined: 30.1-28.9 WLTP; CO2 emissions in g/km combined: 36-33 WLTP. Preliminary figures that have not yet been officially confirmed.) will begin later this year.

The plant is supported by more than 300 suppliers in the U.S., including over 40 direct tier 1 suppliers in South Carolina alone.

“This is a very important step for Plant Spartanburg as we continue our legacy of producing high-quality vehicles, and build on the success of the last 30 years,” said Robert Engelhorn, President and CEO, BMW Manufacturing Co. “With this latest investment, we futureproof our operations and prepare the plant for electrification and new technologies, ensuring both the long-term success of our company and our position as an attractive and viable employer in the state of South Carolina.”

Ongoing Commitment in the U.S.

In addition to sales and marketing operations, the BMW Group footprint in the U.S. consists of nearly 30 locations in 12 different states, including an advanced design studio, a technology research and development center, and a venture capital fund in California, BMW Group Financial Services, and BMW Manufacturing Corporation, which operates Plant Spartanburg in South Carolina. The BMW Group dealer network consists of nearly 650 independently owned BMW, MINI, Rolls-Royce and BMW Motorrad dealers nationwide. Taken together, the BMW Group’s operatons in the U.S. directly and indirectly provide and support more than 120,000 jobs in the U.S., and has contributed $43.3 billion to the U.S. economy.

“Technology Openness” and Customer Focused Flexibility

BMW Group is clearly focused on a sustainable future and shares common ambition in the U.S. with regard to climate goals and the reduction of greenhouse gas emissions. At the same time, the company is following a path of “technology openness” to offer a choice of fully electric, plug-in hybrid electric, and highly-efficient internal combustion options to its customers in meeting their diverse needs in vastly different geographies across the nation. BMW Group is committed to fulfilling its goal of making a minimum of 50% of its global sales battery electric vehicles by 2030.

360-Degree Approach

BMW Group has also set an initial target to reduce CO₂ emissions by 40% per vehicle by 2030. As BMW Group works towards the goal of climate neutrality, the company is focused on the reduction of CO₂ emissions throughout a vehicle’s entire life cycle. 

• Design and Engineering: Beyond simply electrifying its product portfolio, BMW Group begins the design and engineering phase of vehicle development with a ‘secondary first’ approach, so that currently on average nearly 30 percent of materials used in BMW Group vehicles are recycled or reused. In the longer term, the “secondary first” approach aims to increase this figure to 50 percent.
• Supply Chain and Procurement: BMW Group has been actively involved for many years in initiatives to develop standards for responsible raw material extraction and promote compliance with environmental and social standards for raw material extraction through certification of mines. The cobalt and lithium used as raw materials for the new generation of BMW battery cells will be sourced from certified mines which allows the company retains full transparency over extraction methods and ensures responsible mining.
• Vehicle Production: BMW Group’s global production network also relies on renewable energy such as solar, wind, and hydroelectric power in the manufacturing phase of its vehicles. All of the company’s production sites have been net CO₂ neutral by offsets since 2021.
• Vehicle Use Phase: BMW Group is also working to ensure that the electricity generated to charge battery electric vehicles is done so sustainably. For example, partnerships with dairy farms in California reduce greenhouse gas emissions by capturing methane gas and transforming it into renewable energy, which is exported to the power grid. The company also operates a pilot program called ChargeForward in the San Francisco Bay Area which makes it possible for owners to charge their vehicles with as much solar energy as possible.
• Vehicle Recycling & Post-Life:From the start BMW Group vehicles are designed with recycling in mind, thereby improving the possibility for components to be recycled or reused. The company has already demonstrated the ability to recover more than 90% of the material from high-voltage batteries and has approximately 3,000 collection points worldwide for the recycling of end-of-life vehicles.

As the BMW Group continues towards an electric future, the company is looking beyond the vehicles themselves to ensure that it delivers sustainable solutions across the value chain and throughout the entire lifecycle of the vehicle. In the U.S. BMW currently offers two fully electric vehicles including the BMW iX Sports Activity Vehicle and the BMW i4 Gran Coupe. The fully electric
BMW i7 Sedan (power consumption in kWh/100 km combined: 19.6-18.4 WLTP) will come to market later this year and BMW will make a significant step forward. For more information about the BMW Group’s focus on sustainability and unique approach to electrification, please visit: https://www.bmwgroup.com/en/sustainability.html

_{If you have any questions, please contact:}

_{BMW Group Corporate Communications}

_{Eckhard Wannieck, Head of Corporate, Finance and Sales Communications
E-Mail: Eckhard.Wannieck@bmwgroup.com, Tel.: +49 (0) 151 601 28042}

_{Sandra Schillmöller, Communications Purchasing, Supplier Network, Sustainability
Email: Sandra.Schillmoeller@bmwgroup.com, Telephone: +49-89-382-12225}

_{Bernhard Ederer, BMW Group Innovation Communications
Email: Bernhard.Ederer@bmwgroup.com , Tel.: +49 (0) 176 601 28556}

_{Martina Hatzel, Communications Production Network BMW Group
E-Mail: Martina.Hatzel@bmwgroup.com, Tel.: +49 (0) 151 601 11966}

_{For questions regarding Envision AESC please contact:}

_{Lauren Flanagan, Senior Director International Government Relations & Communications, Envision Group
E-Mail: lauren.flanagan@envision-energy.com, Tel. +44 7379 340 101}