Munich. BMW Group Plant Munich is ready for the production of the next vehicle generation. The manufacturing equipment has been installed in the new body shop and assembly line, and functional checks have been successfully completed. During this so-called "Common Function Test," every system undergoes dry runs, in which production planners and plant technicians put the machinery through its paces. All production steps are executed without any parts in the system. Cycle by cycle, an invisible vehicle takes shape. Although no actual car is produced, this process provides the certainty that everything operates seamlessly and as planned.

Peter Weber, head of BMW Group Plant Munich, is delighted: “Just in time for the holidays, we have reached an important milestone: All manufacturing technologies and equipment are ready to go, and we are already training our associates for production of the BMW i3. We are taking major strides towards production of first pre-series vehicles, which will then come completely from our plant.”

However, plant employees will have to remain patient a little longer until then. BMW i3 assembly, which has so far been carried out at the nearby Research and Innovation Centre, will be relocating to Plant Munich in January. With this move, all technologies at Plant Munich are then in place to continue rigorous testing of the complete production system. Series production of the new BMW i3 will then ramp up in summer 2026.

Typical iFACTORY: digitally planned and tested

Plant Munich is consistently aligned with the guiding principles of the BMW iFACTORY. Both the new body shop and new assembly line were digitally planned and built from the outset. Existing installations in the press shop and paint shop are also integrated into the BMW Group’s Virtual Factory. This made it possible to conduct functional testing of all technologies for the new vehicle generation virtually and well in advance.

Extensive remodelling completed in just 18 months

In just 18 months, about a third of the plant grounds has undergone extensive remodelling. Old halls were dismantled, and a new assembly, logistics centre and body shop were built – all while still manufacturing up to 1,000 BMW 3 Series and 4 Series vehicles per day. Series production of the new BMW i3 is scheduled to begin in the second half of 2026.

Munich/Salching. The new Cell Recycling Competence Center (CRCC) in Salching in Lower Bavaria has now been officially commissioned – marking a major step forward in implementing innovative direct recycling as a joint project between the BMW Group and Encory GmbH. For construction and operation of the new Competence Center, the BMW Group and Encory are relying on regional partners.

Innovative direct recycling enables reuse of battery raw materials

Direct recycling allows residual materials from battery cell production, including complete battery cells, to be mechanically dismantled. The raw materials are not entirely reverted to their original state, but are instead “directly” fed back into the cell production cycle. This direct recycling methodology, developed by experts from the BMW Group, therefore eliminates the conventional, energy-intensive chemical or thermal processing previously required. At the new CRCC, direct recycling will be scaled up and introduced in stages until, once fully operational, the annual volume of battery cell material recycled will be in the mid-double-digit tonne range. Going forward, the recovered raw materials will be directly reused in pilot production of battery cells at the company’s own Cell Manufacturing Competence Center (CMCC) in Parsdorf.

Direct recycling: A process for the future

“Our direct recycling process puts us at the forefront of the industry,” explains Markus Fallböhmer, SVP of Battery Production at BMW AG. “This technology has tremendous potential to further optimise battery cell production.” It is also conceivable that, for the first time, cell manufacturers could be enabled to use direct recycling in series production.

Joint venture runs Competence Center – IP remains with BMW Group

An existing hall owned by the company Sturm in Salching in Lower Bavaria (Straubing-Bogen district) will be used for the new Competence Center. In addition to the production area and warehouse space of around 2,100 m², the building also offers just under 350 m² of offices and break rooms, as well as photovoltaic systems on the roof. While the Competence Center will be built and operated by Encory GmbH, the intellectual property for the recycling method is fully owned by the BMW Group. As a joint venture between the BMW Group and the Interzero Group, Encory will develop and implement logistics and consulting solutions, including for recovery, recycling and reconditioning of vehicle components. Both partners hold a 50-percent stake in the company. The new Competence Center will employ about 20 people.

Strong partners from the region

With the exception of one Swiss company, only German firms were contracted for the construction and operation of the Competence Center. Nearly half of these companies are located within a 100-kilometer radius of Salching.

Optimal location for new Competence Center in Bavaria

The BMW Group consolidates its battery cell expertise at its Competence Centers in Munich, Parsdorf and Salching. The Battery Cell Competence Center (BCCC) in the north of Munich offers state-of-the-art labs and research facilities for developing the battery cells for next-generation high-voltage batteries and producing them in small quantities. The best battery cell from the BCCC will be scaled up for series processes on a pilot line at the Cell Manufacturing Competence Center (CMCC) in Parsdorf. Recycling of surplus material from pilot production in Parsdorf will take place at the new Cell Recycling Competence Center (CRCC) in Salching. The recovered raw materials will then be reused in cell production, ensuring short distances between all Competence Centers and preventing valuable raw materials from being lost. Following on from the BCCC and CMCC, the CRCC thus represents the next step in the BMW Group’s battery cell strategy on the road to the circular economy.

Circular economy at the BMW Group

The BMW Group views the circular economy as one of the key issues in shaping more resource-efficient mobility. Its approach is aimed at finding the best ways to keep materials in the cycle – ensuring that resources are not lost, but retain their value for long-term use. The BMW Group applies the principles of Re:Think, Re:Duce, Re:Use and Re:Cycle. From vehicle design and production, to recycling and reuse, everything is geared towards ensuring that vehicles can serve as a source of raw vehicles at the end of their use phase. The BMW Group is taking steps to increase the percentage of recycled materials. It returns selected production residues to the material supplier or material processor, enabling their recovery and reintroduction into a new manufacturing process. In this way, recycled and reused materials are already making their way into BMW Group vehicles today. The circular economy requires holistic thinking – from product design, all the way through to vehicle recycling. 

Munich. Please find the satellite details of the BMW Group Press Conference as follows: 

8 SEPTEMBER 2025.

08:30 - 08:50 A.M. CEST – BMW Group Press Conference at the IAA Summit. LIVE

Technical data TV satellite transmission:
 

Contact SNG: Tel. +49 (0) 179-5079009 (Torsten Jobmann)

Live Stream available at:

English: https://www.live.bmwgroup.com/en/live-streaming/
German: https://www.live.bmwgroup.com/de/live-streaming/

If you have any questions, please contact:
BMW Group Corporate Communications

Sibylle Böres, BMW Group Press & PR Events
Telephone: +49-151-60120906
E-Mail: Sibylle.Boeres@bmw.de

Wieland Brúch, Press Spokesperson BMW Product Communications
Electromobility and Sustainability
Telephone: +49-176-60172652
E-Mail: Wieland.Bruch@bmw.de

Munich. Please find the satellite details of the BMW Group Keynote with the World Premiere of the new BMW iX3 as follows:    

Agenda: 

5 September 2025.

11:00 - 11:30 A.M. CEST - World Premiere of the new BMW iX3. LIVE

Technical date TV satellite transmission:

Contact SNG: Tel. +49 (0) 179-5079009 (Torsten Jobmann)
 

Live Stream available at:

English: 

https://www.live.bmwgroup.com/en/live-streaming/ 

https://youtube.com/live/tRA3B-w7BUY?feature=share

German:

https://www.live.bmwgroup.com/de/live-streaming/

If you have any questions, please contact:

BMW Group Corporate Communications
Sibylle Böres, BMW Group Press & PR Events
Telephone: +49-151-60120906
E-Mail: Sibylle.Boeres@bmw.de

Matthias Bode, Press Spokesperson BMW Compact Class and BMW iX3
Telephone: +49-151-60161742
E-Mail: Matthias.Bode@bmwgroup.com

CO2 EMISSIONS & CONSUMPTION.

Munich. The BMW Museum in Munich is using a special exhibition taking place as part of the international BMW Art Car World Tour to celebrate the 50-year anniversary of both the legendary BMW Art Car Collection and the iconic BMW 3 Series. The exhibition will open its doors to visitors from 17 June, hot on the heels of the Le Mans 24 Hours race weekend. Fittingly, it was at Le Mans in 1975 that the first BMW Art Car – created by Alexander Calder – staged its glittering premiere. The exhibition, which runs until 1 February 2026, will see the BMW Museum present a trio of Art Cars based on the BMW 3 Series: Sandro Chia’s BMW M3 GTR and the BMW M3 (Group A) cars designed by Michael Jagamara Nelson and Ken Done respectively.

The exhibition at the BMW Museum – the home of the BMW Art Cars when they are not on display at destinations around the globe – is one of the attractions of the ongoing BMW Art Car World Tour, the largest exhibition project yet in the 50-year history of the collection. The Tour has so far visited 12 markets on five continents, and will continue to showcase the legendary BMW Art Cars across numerous art and car platforms, and at institutes worldwide, over the coming year. The BMW Museum will use the special exhibition to provide insights into the artistic brilliance and history of the BMW Art Car Collection, as well as inviting visitors to explore the technical excellence of the 3 Series and the innovative power of the BMW brand.

50 years of driving pleasure: the BMW 3 Series 
Since it first hit the roads in 1975, the BMW 3 Series has served as a byword for driving pleasure and a cornerstone for the success of BMW. Across five decades, it has reimagined the concept of the sports sedan, set new standards for performance and put smiles on the faces of millions of drivers around the world. From the groundbreaking first generation to today’s innovative models, the 3 Series has been an enduring, style-defining feature of the automotive landscape.

50 years of “rolling sculptures”: the BMW Art Car Collection
Since 1975, renowned artists from countries the world over have gone to work creating BMW Art Cars. The idea was the brainchild of French racing driver and art lover Hervé Poulain, who teamed up with BMW’s then Head of Motorsport Jochen Neerpasch to invite friend and artist Alexander Calder to paint a design onto a car. The result was a BMW 3.0 CSL that competed in the 24 Hours of Le Mans in 1975, becoming a darling of the crowd – and marking the birth of the BMW Art Car Collection. Famous names including Frank Stella, Roy Lichtenstein, Andy Warhol, Robert Rauschenberg, Esther Mahlangu, David Hockney, Jenny Holzer and Ólafur Elíasson have since added further BMW Art Cars bearing their own individual style to the collection. More recently, the American John Baldessari and Chinese multimedia artist Cao Fei used the BMW M6 GTLM and BMW M6 GT3 respectively as a canvas for their takes on the BMW Art Car concept in 2016 and 2017. They therefore joined Jeff Koons and Julie Mehretu in applying their creativity to dynamic racing cars in the last 15 years.

BMW Art Cars at the BMW Museum from 17 June
BMW M3 Group A by Ken Done (1989):
Australian artist Ken Done created a vibrant and richly coloured design that captures the energy and dynamism of motor racing. His work represents a homage to the speed and power of the BMW M3.

“It was a great honour to be asked to be part of this fabulous Art Car collection. I wanted to express the joy of speed and the brilliance of the machine itself.” Ken Done

BMW M3 Group A by Michael Jagamara Nelson (1989):
Michael Jagamara Nelson, also from Australia, brought the traditions of Aboriginal art to the bodywork of the BMW M3. His complex motifs using dot painting techniques tell Dreaming stories that are deeply rooted in the culture of his people.

“A car is a landscape as it would be seen from a plane – I have included water, the kangaroo and the opossum.” Michael Jagamara Nelson

BMW M3 GTR by Sandro Chia (1992):
Italian artist Sandro Chia transformed a BMW M3 GTR into a painting on wheels that depicts human figures and emotions in vivid colours. His work symbolises the connection between man and machine, and invites us to reflect on the role of the car in modern society.

“I have created both a picture and a world. Everything that is looked at closely turns into a face. A face is a focus, a focus of life and the world.” Sandro Chia

The 10th BMW Art Car, a BMW 730i designed by Spanish artist César Manrique in 1990, is also on show at the BMW Museum as part of its permanent exhibition.

For more information, please visit:
BMW Art Cars im BMW Museum
BMW Art Car World Tour

If you have any questions, please contact:
Lisa Meindl
BMW Group Corporate and Governmental Affairs
Spokesperson BMW Museum und BMW Welt
Phone: +49-89-382-31668 
E-Mail: Lisa.Meindl@bmw.de

Ilya Baryshev
BMW Group Corporate and Governmental Affairs
Spokesperson, BMW Art Car World Tour
Telefon: +49-151-601-544-36
E-Mail: Ilya.Baryshev@bmwgroup.com

Munich. BMW Group Plant Munich is gearing up to launch the NEUE KLASSE in summer 2026. During ongoing series operation, three new production halls are currently being built for the body shop, assembly and associated production logistics. “For the production start of the NEUE KLASSE, we will have a state-of-the-art plant in Munich that is characterised by flexibility, innovation and, above all, efficiency,” says Plant Director Peter Weber.

Starting in 2027, the plant in Munich will exclusively produce fully-electric vehicles, further enhancing efficiency boost. Forward planning, close cooperation with development teams and suppliers, and the integration of modern production technology within new structures will all play a key role. “With the NEUE KLASSE, we will significantly reduce manufacturing costs at the Munich Plant,” says Weber. In addition to optimised production processes and targeted automation, the NEUE KLASSE’s new vehicle architecture will also leverage further efficiencies. Focusing on a single drive train variant reduces production steps and the number of parts – for example, for wiring harnesses, which previously varied according to engine type and can be complex to install.

Unusual process: Pre-series production at pilot plant
The timeline for the ramp-up in Munich is carefully synchronised – in part due to the plant’s refurbishment. The first pre-series vehicles will be built at the pilot plant of the BMW Group Research and Innovation Centre (FIZ), with support from Plant Munich’s production team, before the end of the year. “Alongside the pilot plant at the FIZ, we are also using virtual simulations to ensure a smooth ramp-up,” says Weber, describing the unusual situation in the decisive year ahead of the launch. He adds that Plant Munich’s experienced launch team is also working closely with colleagues at the new plant in Debrecen, Hungary, where the first NEUE KLASSE model will enter production late this year.

International production network: Cooperation, flexibility and innovative processes
BMW Group plants are capable of producing different model variants and drive train types on a single line. Since the ramp-up of electromobility is not linear and will progress at varying speeds, the company has relied on “flex-plants”, which can manufacture vehicles with both internal combustion engines and electric drive trains. “In this way, we can ensure our delivery capabilities in different market situations and maintain good capacity utilisation at our locations,” explains Milan Nedeljković, member of the Board of Management responsible for Production.

By the end of the decade, the BMW Group expects a significant increase in the market shares of fully-electric vehicles. For this reason, the plants in Debrecen and, later, Munich will be the first facilities dedicated exclusively to fully-electric vehicles, enhancing electrification capacities throughout the network.

The German plants lead the way on e-mobility in the BMW Group’s production network: Alongside traditional drive technologies, each of them builds at least one fully-electric model for the global market. Even in a volatile environment, the BMW Group continues to grow its domestic locations, manufacturing over a million vehicles there last year – accounting for a quarter of Germany's total automotive production.

At the same time, the company’s production also depends on a balanced global distribution of value creation. “The strategic and flexible structure of our production network strengthens our resilience and makes us more competitive,” adds Nedeljković.

Focus on employees: Developing skills for e-mobility
The shift towards electrified vehicles also brings changes to employee roles and required skills. With the flexible ramp-up of e-mobility at BMW Group plants, employees can gradually be prepared for new job content.

“Despite technical and structural innovations, our focus is always on people. We take pride in our employees’ expertise and experience, and their dedication to continuous improvement. It is thanks to their commitment that we are able to consistently deliver premium-quality vehicles,” emphasises Weber. Additional expertise will be developed and retained at the company through extensive further training and workforce flexibility. Last year alone, nearly 25,000 employees completed e-mobility training. Plant Munich is currently holding its third industrial electrician qualification course, conducted in cooperation with the Chamber of Industry and Commerce (IHK).

In recent years, around 5,500 jobs have been created across the BMW Group production network for the current and upcoming generation of e-drives. More than three quarters of these positions were filled through internal reorganisation. 

Munich. A new era is dawning for BMW Group Plant Munich: from 2026, the iconic parent plant will produce the Neue Klasse sedan. Just one year later, the factory will manufacture nothing but all-electric models, making the Munich plant the first location in the BMW Group’s existing production network to have successfully completed the transformation to E-mobility from the end of 2027.

“The Munich plant is an excellent example of our ability to adapt. We are investing € 650 million here and will produce exclusively all-electric vehicles in our parent plant from the end of 2027,” says Milan Nedeljković, Member of the Board of Management of BMW AG, Production. “Last year alone, six all-electric models went into production. At the same time, we also set a production record, proving that we are simultaneously able to both deliver and shape the future in our production network.”

Peter Weber, Director BMW Group Plant Munich, adds: “Munich is the beating heart of BMW. The plant in Munich is innovative and adaptable. As in the 1960s, a Neue Klasse is again laying the foundation, on which our plant is reinventing itself. The fact that this comprehensive transformation is taking place at the same time as roughly 1,000 vehicles per day are currently being manufactured is common practice in Munich and is possible thanks to the outstanding performance of all our employees. We are delighted to be guiding the Munich plant into a fully-electric future – starting with the Neue Klasse sedan.”

Smooth transition to electromobility, as the era of combustion automobiles from Munich ends in 2027

BMW Group Plant Munich is a prime example of the fluent transition to the era of electromobility. In 2015, the first plug-in hybrid models from the BMW 3 Series were manufactured on the same production line as combustion vehicles. In 2021, the BMW i4 became the first all-electric vehicle to be produced on the same production line. Nowadays, every second vehicle that rolls off the production line has an all-electric drive system.

From 2026, production of the Neue Klasse in the Munich plant will initially run parallel to production of current models. A good year later, from the end of 2027, the BMW Group’s parent plant will be the first existing site in the global production network to manufacture exclusively all-electric vehicles, having been transformed accordingly. As such, the era of vehicles with combustion engines in Munich will draw to a close 75 years after the launch of the BMW 501 in 1952.

After the start in the new plant in Debrecen, Hungary, and in Munich, the Neue Klasse vehicles will also be produced in Shenyang, China, and San Luis Potosí in Mexico.

Extensive modifications offer long-term security for location

Over the course of a history stretching back more than 100 years, BMW Group Plant Munich has undergone many changes and repeatedly reinvented itself. Together with the conversion from manufacturing aircraft engines to automobile construction, the successful introduction of the Neue Klasse in the 1960s is a milestone in the list of changes throughout the company’s history.

At the moment, multiple large construction sites are evidence of the turnaround, as they pave the way for the arrival of the Neue Klasse from 2026. The € 650 million of investment comprises four buildings, including a new vehicle assembly line with logistics areas and a new body shop.

In order to create the space within the limited floor space at the plant in the heart of Munich, the traditional engine manufacturing has been moved to Hams-Hall in Great Britain and Steyr in Austria after roughly 70 years at the parent plant. 1,200 employees have been trained for different production strategies in Munich or have taken up employment at other locations in the production network.

As in the 1960s and all other changes since, the current transformation of BMW Group Plant Munich is taking place whilst production is still ongoing. Regardless of the construction work, roughly 1,000 cars roll off the production line every day, including BMW 3 Series and the BMW i4 – all on the same assembly line.

The extensive reorientation of the plant secures a long-term future for the site in Munich, and is also a significant investment in Bavaria as an industrial location.

Digitalisation at the Munich plant in accordance with the principles of BMW iFACTORY

The principles of BMW iFACTORY guarantee the utmost flexibility, excellent processes and outstanding integrability at all sites within the BMW Group – from the completely new plant in Debrecen to the parent plant in Munich, which is over 100 years old and at which the transformation is in full swing. BMW iFACTORY is synonymous with the superb production expertise throughout the entire production network. One important aspect is a comprehensive digitalisation with a holistic approach to the interaction between people, processes and systems. It optimises processes and supports employees with their work. The implementation takes place in three areas: data science, artificial intelligence (AI) and virtualisation.

Munich. Please find the satellite and iFrame details of the MINI Keynote at the Media & Stakeholder Days as follows:

Agenda 01.09.2023:

11:00 – 11:30 a.m. CEST               MINI Keynote – LIVE

TV Satellite transmission information:

Contact SNG: Tel. +49 179-507-90009 (Torsten Jobmann)

iFrame code sample to embed the webcast in websites:

Player can be integrated in any size, please consider the 16:9 aspect ratio.

Live Stream available at:

http://www.live.bmwgroup.com and
https://www.youtube.com/watch?v=S01zzBpUwgY

If you have any questions, please contact:

Corporate Communications
Sibylle Böres
BMW Group Press & PR Events
Telephone: +49-151-601-20906
E-Mail: Sibylle.Boeres@bmw.de

Franziska Liebert
Corporate, Product and Innovations Communications
Communications MINI
Telephone: +49-151-601-28030
E-Mail: Franziska.Liebert@mini.com

Munich. Please find the satellite and iFrame details of the MINI Keynote at the Media & Stakeholder Days as follows:

Agenda 01.09.2023:

11:00 – 11:30 a.m. CEST               MINI Keynote – LIVE

TV Satellite transmission information:

Contact SNG: Tel. +49 179-507-90009 (Torsten Jobmann)

iFrame code sample to embed the webcast in websites:

Player can be integrated in any size, please consider the 16:9 aspect ratio.

Live Stream available at:

http://www.live.bmwgroup.com and
https://www.youtube.com/watch?v=S01zzBpUwgY

If you have any questions, please contact:

Corporate Communications
Sibylle Böres
BMW Group Press & PR Events
Telephone: +49-151-601-20906
E-Mail: Sibylle.Boeres@bmw.de

Franziska Liebert
Corporate, Product and Innovations Communications
Communications MINI
Telephone: +49-151-601-28030
E-Mail: Franziska.Liebert@mini.com

Munich. Please find the satellite details of the BMW Group Keynote at the Media & Stakeholder Days as follows:

Agenda 02.09.2023:

10:00 - 11:00 a.m. CEST   BMW Group Keynote - LIVE

TV Satellite transmission information:

Contact SNG: Tel. +49 151-195-88839 (Michael Bernstein)

iFrame code sample to embed the webcast in websites:

Player can be integrated in any size, please consider the 16:9 aspect ratio.

Live Stream available at:

http://www.live.bmwgroup.com and
https://www.youtube.com/watch?v=-FBhmmT9pIs

If you have any questions, please contact:

BMW Group Corporate Communications
Sibylle Böres, BMW Group Press & PR Events
Telephone: +49-151-601-20906
E-mail: Sibylle.Boeres@bmw.de

Matthias Schepke, Spokesperson Neue Klasse
Telephone: +49-151-601-90450
E-Mail: Matthias.Schepke@bmw.de

Munich. At the IAA Mobility 2023 international motor show in Munich, the BMW Group will be presenting the most recent highlights of its ongoing transformation in the key action areas of electrification, digitalisation and circularity. The latest new models with electrified powertrains from the BMW, MINI and BMW Motorrad brands, plus Vision Vehicles and concepts for individual mobility in tomorrow’s world all serve to underline the company’s innovative strength in these fields. As the dawn of a new era in personal mobility approaches, the BMW Group is set to unveil its latest highlight, the BMW Vision Neue Klasse, which brings together the Group’s development expertise in the three crucial disciplines for the future of mobility.

The IAA Mobility show is being staged in Munich for the second time. For the BMW Group and its brands, this provides an excellent opportunity to enter into constructive dialogue on the future of individual mobility with local people, as well as with visitors to the show from outside Munich and other stakeholders. The IAA Mobility Summit at the exhibition centre and the BMW Group’s Open Space at Max-Joseph-Platz in the heart of Munich will be the main arenas where BMW, MINI and BMW Motorrad present their new products on 5 – 10 September 2023. Among the models visitors can acquaint themselves with here alongside the BMW Vision Neue Klasse is the fully electric BMW i5. And they can also experience the world premieres of the new fully electric MINI Cooper, new fully electric MINI Countryman and BMW CE 02 eParkourer.

Electric, digital, circular – the focus areas of the BMW Group.

The BMW Group’s presence at IAA Mobility 2023 revolves around the company’s rigorous focus on electric, digital and circular mobility for the future and the latest progress it has made in these areas. The BMW Vision Neue Klasse is joined by a selection of new models from across the Group’s brands whose electrified powertrains, digital innovations and resource-efficient manufacturing illustrate the ongoing process of change in a variety of ways.

The new products poised for launch by the BMW brand include the plug-in hybrid variants of the new BMW 5 Series. The new BMW i7 Protection – the first ever all-electric protection vehicle in the luxury sedan segment – is also making its debut at IAA Mobility 2023.

MINI is unveiling the members of the brand’s new model family for the first time with the help of two world premieres: the new fully electric MINI Cooper and new fully electric MINI Countryman will both be on show at the Open Space site. A new model with all-electric drive also forms the centrepiece of BMW Motorrad’s line-up at Max-Joseph-Platz. Conceived as a compact eParkourer with a trailblazing design, the new BMW CE 02 injects fresh impetus into the urban mobility scene.

Locally emission-free mobility sets the theme for the models on show.

The IAA Mobility show will be officially opened on 5 September at Munich’s exhibition centre. The BMW Group will be represented at its stand in Hall A2, where the BMW Vision Neue Klasse will be unveiled to kick off the event. The BMW i7 Protection all-electric protection vehicle will also be presented for the first time at the IAA Mobility Summit.

The IAA Mobility Summit is taking place under the banner “Experience Connected Mobility” and is aimed primarily at trade visitors. It will showcase trends and technological innovations for future mobility over the course of numerous talks, presentations and panel discussions. One of the central topics is the use of hydrogen as an energy source for current and future vehicles. BMW is carrying out pioneering work in this field with its development and practical testing of a Sports Activity Vehicle with a hydrogen-powered fuel-cell drive system. The BMW iX5 Hydrogen is also being exhibited at the Summit.

Locally emission-free mobility is also the dominant theme for the models awaiting visitors to the Open Space site. BMW has at least one purely electrically powered representative in all relevant model segments. The brand is presenting its entire line-up to the public, ranging from the BMW iX1 compact Sports Activity Vehicle via the BMW i4 and BMW i5 to the BMW iX and the BMW i7 luxury sedan.

The Open Space at Max-Joseph-Platz can be visited free of charge on 5 – 9 September from 10 a.m. to 10 p.m. and on Sunday 10 September from 10 a.m. to 5 p.m. In addition, BMW Welt will continue to provide an attractive destination for all automotive enthusiasts during IAA Mobility 2023. The current model portfolios of the BMW, MINI, Rolls-Royce and BMW Motorrad brands are presented here, along with the latest BMW and MINI Lifestyle collections. Plus, starting on 2 September 2023, BMW Lifestyle together with BMW M GmbH will be running a GOODS WITH FREUDE pop-up store in the Hofstatt shopping centre at No. 10 Sendlinger Straße. Located just a few minutes’ walk away from the Open Space, the store will feature both familiar lifestyle articles and the new BMW Lifestyle collection.

World premiere: the BMW Vision Neue Klasse.

At IAA Mobility 2023, the BMW Group is offering visitors a preview of the Neue Klasse – the forthcoming generation of models from BMW. The BMW Vision Neue Klasse brings together innovations from the areas of electrification, digitalisation and circularity in signature BMW style. The Vision Vehicle takes design, control/operation, efficiency and sustainability into a whole new dimension – one that it will be possible to experience on the road before long.

During IAA Mobility 2023, the BMW Vision Neue Klasse will be on show at both the Summit and the Open Space. The new Vision Vehicle incorporates the latest innovations in the BMW Group’s key future-focused fields. It therefore builds on the BMW i Vision Circular and the BMW i Vision Dee – which have already demonstrated the BMW Group’s development expertise in the areas of circular economy and digitalisation – and combines their qualities with further new developments in exterior and interior design, user experience and powertrain and battery technology.

World premiere: the plug-in hybrid variants of the new BMW 5 Series Sedan.

As well as the all-electric BMW i5, the brand is exhibiting two other model variants with electrified powertrains at IAA Mobility 2023. As early as spring 2024, two models featuring state-of-the-art plug-in hybrid technology will be added to the new BMW 5 Series Sedan range. Their six-cylinder and four-cylinder in-line petrol engines from the new modular generation of Efficient Dynamics units will each be combined with the latest BMW eDrive technology for plug-in hybrid systems. This will result in a notable increase in output and much sharper power delivery, while also significantly improving efficiency and electric range compared to the outgoing model generation.

The electric motor purpose-developed for the new plug-in hybrid system is integrated into the eight-speed Steptronic Sport transmission together with its power electronics. The highly integrated drive unit contributes up to 145 kW/197 hp to the maximum combined output of 360 kW/489 hp in the case of the new BMW 550e xDrive Sedan (fuel consumption combined: 1.1 – 0.8 l/100 km [256.8 – 353.1 mpg imp]; electric power consumption combined: 22.5 – 20.1 kWh/100 km; CO₂ emissions combined: 24 – 19 g/km in WLTP cycle, provisional figures) and 220 kW/299 hp for the new BMW 530e Sedan (fuel consumption combined: 0.8 – 0.6 l/100 km [353.1 – 470.8 mpg imp]; electric power consumption combined: 21.4 – 18.9 kWh/100 km; CO₂ emissions combined: 19 – 14 g/km in WLTP cycle, provisional figures).

A BMW-patented innovation has been used to enhance the electric motor’s power delivery in the new plug-in hybrid models: a pre-gearing stage enables the nominal torque of 280 Nm (206 lb-ft) to be increased to effective torque of up to 450 Nm (332 lb-ft) at the transmission input for the motor. The compact electric motor is therefore able to boost torque by an amount that would normally only be possible using a larger unit and makes a clear difference both when accelerating off the line and putting in a rapid burst of speed. Electric range is now up to 79 – 90 kilometres (49 – 56 miles) in the WLTP cycle for the new BMW 550e xDrive Sedan and 87 – 101 kilometres (54 – 63 miles) in the WLTP cycle for the new BMW 530e Sedan.

The lithium-ion high-voltage battery’s space-saving positioning within the vehicle’s underbody has a beneficial effect on both the car’s centre of gravity and the capacity of its luggage compartment, which holds a total of 520 litres in the plug-in hybrid models – meaning it is just as large as that offered by their purely combustion-engined siblings. The usable energy provided by the high-voltage battery has climbed to 19.4 kWh. At the same time, maximum charging capacity has doubled compared to the outdoing models and now stands at 7.4 kW, enabling the high-voltage battery to be fully recharged from empty in 3.0 hours. When hooked up to a conventional domestic power socket, a full vehicle charge is completed in 9.8 hours.

World premiere: the BMW i7 Protection.

BMW is presenting a new generation of protection vehicles in the luxury sedan segment at the IAA Mobility 2023 show. The new BMW i7 Protection (electric power consumption combined in WLTP cycle: 30.0 kWh/100 km, provisional figure) is absolutely unique in this segment, as it is the world’s first ever certified protection sedan with an all-electric drive system. Driven by two powerful electric motors, it meets all the requirements of class VR9 protection without any limitations, as does the new V8-engined BMW 7 Series Protection (fuel consumption combined in WLTP cycle: 14.6 l/100 km [19.3 mpg imp]; CO₂ emissions: 328 g/km, provisional figures).

Both models blend the integrated protection concept channelled into the development of the new BMW 7 Series range with outstanding levels of ride comfort and spaciousness, advanced equipment features and the unbeatable dynamic prowess for which BMW is renowned. The concept centres around the new and unique BMW Protection Core, which forms a self-supporting body structure made from armour steel. This is then combined with features such as additional armouring for the underbody and roof, plus armoured glass. The result is customised protection from attacks with firearms or explosives for at-risk individuals. The glass in the new protection vehicles even meets the requirements for the highest class of civilian protection, VPAM 10.

The all-electric BMW i7 Protection is equipped with one electric motor at the front axle and another at the rear. Together they generate a combined output of 400 kW/544 hp and maximum combined torque of 745 Nm (549 lb-ft), and create an electric all-wheel-drive system. The new BMW i7 Protection sprints to 100 km/h (62 mph) from rest in 9.0 seconds, while top speed is electronically limited to 160 km/h (99 mph). The instantaneous, precisely orchestrated power delivery from the two motors guarantees exceptional traction and directional stability even when the car is being driven hard and performing challenging manoeuvres, such as when escaping from an attack.

Tuned and optimised specifically for this model, the chassis technology also makes allowance for the additional weight of its armouring, resulting in superbly assured performance in any situation. Another unique offering for this segment is the inclusion of Integral Active Steering as standard. This reduces the car’s turning circle, increases agility when cornering at speed and improves driving comfort for rear-seat passengers. The 20-inch light-alloy wheels are a further standout feature. The PAX tyres that also come as standard allow the car to continue its journey at up to 80 km/h (50 mph) even in the event of a total loss of pressure.

The latest generation of BMW iDrive based on BMW Operating System 8.5 is fitted, complete with the BMW Curved Display. The system is intuitive to use and operates in a way familiar to BMW drivers. The special functions relevant to occupant protection are also operated via BMW iDrive. The new protection vehicles can also be tailored precisely to any purpose, with items including a fresh-air supply system, a fire extinguishing system, flashing lights, radio transceivers and flag poles for when the car is on official duty, plus other special customer-specific options.

Trailblazing: the BMW iX5 Hydrogen.

The BMW iX5 Hydrogen presented at IAA Mobility 2023 provides further evidence of the company’s superlative innovative strength in the field of drive technology. A pilot series of the Sports Activity Vehicle with hydrogen fuel-cell drive, developed on the basis of the current BMW X5, has entered service for demonstration and test purposes with various target groups around the world. This allows selected test groups who haven’t been involved in the development process to get behind the wheel of the BMW iX5 Hydrogen and gain a direct impression of its attributes for the first time.

The BMW iX5 Hydrogen is equipped with the latest, fifth generation of BMW eDrive technology. The highly integrated drive unit at the rear axle draws its energy from a high-performance battery with li-ion technology that was specially developed for the hydrogen fuel-cell vehicle and generates maximum output of 295 kW/401 hp. The electric motor also doubles as a generator that feeds energy back into the high-performance battery on the overrun or under braking.

The model’s two 700-bar tanks made from carbon-fibre-reinforced plastic (CFRP) together hold six kilograms of gaseous hydrogen and can be refilled in three to four minutes. A chemical reaction takes place in the fuel cell system between the hydrogen and oxygen from the air, through which the electric power for the electric motor is generated. The BMW iX5 Hydrogen achieves a range of 504 kilometres (313 miles) in the WLTP cycle without having to refill the tanks. The hydrogen-powered SAV completes the 0 to 100 km/h (62 mph) sprint in under six seconds and goes on to reach a top speed in excess of 180 km/h (112 mph).

The BMW iX5 Hydrogen combines long-distance capabilities and short refuelling stops with zero tailpipe emissions and hallmark BMW driving dynamics. Its hydrogen fuel-cell technology has the potential – provided the necessary basic conditions are in place – to serve as an additional pillar in the BMW Group’s future powertrain portfolio. As part of its ongoing transformation, the BMW Group is following an approach that embraces all technologies when it comes to drive systems. The company is therefore readying itself for differing customer requirements, infrastructure standards and political and regulatory frameworks in the various regions of the world. This degree of flexibility puts the BMW Group in a position to react quickly to changing requirements in the markets in any situation and to present as many customers as possible with an appropriate model offering at all times.