Note: This press release is a 1:1 copy of the original issued by BMW headquarters in Germany. No adaptions have been made to cater to the UK market.

Munich. BMW Group Plant Munich is approaching the biggest milestone in the transformation process: series production of the BMW i3, the second model in the Neue Klasse range, gets underway here in August. This marks the start of the rollout of the Neue Klasse within the BMW Group’s global production network.

“We have been making rigorous preparations. With the BMW iFACTORY we have devised a consistent, strategic framework for our production,” explains Milan Nedeljković, Member of the Board of Management of BMW AG, Production. “We have paved the way for the upcoming start-ups in all our plants and have invested heavily in technologies, digitalisation and AI.”

BMW Group Plant Munich has undergone extensive modernisation in recent years. The result is a plant that now works even more efficiently, flexibly and digitally, and is optimally positioned for the requirements of electric mobility and the Neue Klasse.

But that’s not all: as of 2027, the Munich plant will exclusively produce all‑electric vehicles and thereby achieve a further boost in efficiency. This is assisted by proactive planning, close collaboration with development teams and suppliers, as well as modern production technology in the new structures. “We have considerably reduced production costs over recent years. With the start of production of the BMW i3, we will reduce overall production costs at the Munich plant by a further 10 per cent, bringing them below the level of the current vehicle generation,” says Peter Weber, Head of BMW Group Plant Munich. In addition to optimised production processes and targeted automation and digitalisation, the new vehicle architecture of the Neue Klasse also ensures efficiency.

Plant Munich is investing around 650 million euros in its transformation into a fully electric production site.

Highly efficient production at historic site

Plant Munich has been consistently reinventing itself for more than 100 years – from a location outside the city to today’s site surrounded by it. The facility has undergone a fundamental process of redevelopment for the Neue Klasse – with production of up to 1,000 vehicles a day continuing during this period. A new body shop and state-of-the-art vehicle assembly including new logistics areas were set up on an area spanning around a third of the plant’s footprint. Extensive updates have also been made to existing technologies.

Plant manager Peter Weber highlights what the workforce has achieved: “The people at the factory played an essential role in making this transformation a success. With their high level of expertise, enthusiasm and tremendous dedication, our employees have shown that world-class industrial production is possible even under the toughest conditions. The BMW i3 is just the beginning – several Neue Klasse models will be manufactured in Munich in the future, including the BMW i3 Touring.”

A vision for all technologies: the BMW iFACTORY

The BMW iFACTORY focuses on the areas of efficiency, sustainability and digitalisation. Within this framework, the company’s plants around the world are implementing site-specific solutions and, in so doing, strengthening the company’s resilience as well as its ability to deliver reliably at any time and worldwide. This vision has now also been consistently implemented across all technologies at BMW Group Plant Munich.

“We have rethought the entire value stream from supplier to finished customer vehicle. We have looked at every single process in detail and made optimisations. Now our plant is even more efficient, more flexible and even more digitised than ever before. We are thereby safeguarding the future viability of the plant,” adds Peter Weber.

In the press shop, steel and aluminium boards are turned into tens of thousands of components on highly automated press lines daily. Uniform press and tool standards across the global production network result in efficiencies on many levels: installation and integration of the systems are standardised, tools for the presses can be swapped within the network, and employees can work at various locations and help each other. An AI-assisted camera system supports quality control before an underground transport system moves the parts to the body shop. Output has increased significantly compared with previous structures. Cuts of steel and aluminium are collected, sorted and then used to manufacture new steel or aluminium coils.

Plant Munich has set up a new body shop for the Neue Klasse featuring systems planned and realised using a virtual twin. A total of 800 new industrial robots take care of the joining processes here; decreasing the number of joining processes to five reduces process complexity. With an automation rate of around 98 per cent, robots perform the majority of standardised processes. Automated surface inspection (ASI) assists with quality assurance.

In the paint shop at Plant Munich, digital and AI-assisted systems control central quality processes. Automated surface inspection (ASI) uses cameras and artificial intelligence to detect even the most minor deviations on the surface and documents them digitally. Automated surface processing (ASP) works on the variations detected directly during the running process. To purify the exhaust air, the paint shop uses the energy-efficient, electrically powered eRTO process. This is complemented by heat and energy recovery as well as water-saving cycles.

What once was the home of engine manufacturing at BMW Group Plant Munich has become a new assembly area for the Neue Klasse. The assembly area is set up for end-to-end digital processes: vehicles, systems and tools are interconnected and digital live tracking and automated inline quality checks support employees in the assembly line process. During assembly already, the BMW i3 digitally transmits the status of up to 20,000 features to the production system. Ergonomic workstations, height-adjustable systems and simplified processes lighten the load for employees, while targeted training supports new digital fields.

Aspart of the transformation, logistics at BMW Group Plant Munich has focused squarely on efficiency and direct integration of production. The logistics department at the Munich plant moves around 2.5 million parts every day; in future around 70 per cent of these parts will be delivered directly to the assembly workstations. This will reduce internal transport distances, save space and accelerate supply to the production lines. This is made possible by a multi-storey building structure developed specially for the plant’s city location. Delivery is at ground level and then conveyor technology transports the parts to the right levels, where they are distributed directly to the assembly workstations. This enables the principle of direct delivery to be applied systematically even in a multi-storey plant. At the same time, the level of automation in logistics has been significantly increased. Automated supply systems, smart transport robots and driverless transport systems will handle around 60 per cent of supply tasks in the future. A digital logistics control station manages all processes centrally, ensuring transparency and data-driven optimisation.

Unique to Plant Munich is the in-house seat manufacturing facility. It is a “plant inside a plant” and takes on a central role for quality assurance and expert evaluation within the production network. The seats for all versions of the models produced in Munich are manufactured here and delivered to vehicle assembly directly and “just in sequence”. The in‑house seat manufacturing facility is regarded as the benchmark for quality assurance across the BMW Group. Modern, largely automated processes ensure seamless quality control. This is complemented by fully automated end-of-line checks, including for safety-relevant components. The seat manufacturing facility also systematically strengthens the BMW Group’s in-house expertise. It serves as a competence centre and innovation hub, tests new materials, technologies and manufacturing concepts, and supports the evaluation of costs, quality and production processes – making an impact far beyond the Munich location.

Global network, regional value creation: high-voltage batteries and e-drive

With the new assembly plant for high-voltage batteries in Irlbach‑Straßkirchen (Lower Bavaria, Germany) around 90 minutes away, the BMW Group is significantly boosting value creation in the Bavaria region. In keeping with the “local for local” approach, Irlbach-Straßkirchen will deliver high-voltage Gen6 batteries to the Munich plant as well as other German locations. Here, the batteries will be installed in the BMW i3. Manufacture of the high-voltage batteries combines a rigorous zero-defect approach with the latest production technologies, which were developed at Bavarian pilot plants. With seamless inline quality controls, digital twins and the systematic use of artificial intelligence, the BMW Group is setting new standards in battery production.

The Gen6 e-motor for the BMW i3 is produced at BMW Group Plant Steyr in Austria – a location that has been manufacturing drivetrains for over 40 years. With the first e-motor in the portfolio, the plant is developing its role as a prime example of technology openness. All core components of the highly integrated e-drive – from the rotor and stator to the inverter and transmission – are produced on-site. New production lines and state‑of‑the‑art clean room environments have been set up for this. The aluminium foundry at BMW Group Plant Landshut supplies the e-motor housing for Plant Steyr.

Note: This press release is a 1:1 copy of the original issued by BMW headquarters in Germany. No adaptions have been made to cater to the UK market.   

Munich/Wackersdorf. The BMW Group is relocating its Recycling and Dismantling Centre (RDC) from Unterschleißheim to the company’s Wackersdorf site, with a significant expansion. At the new location, a technologically state-of-the-art competence centre for circularity is being built, advancing vehicle dismantling and recycling expertise for the future. Commissioning is scheduled for early 2029.

“The circular economy is a key element of the BMW Group’s corporate strategy,” says Jörg Lederbauer, Vice-President Circular Economy, Spare Parts Supply High Voltage Battery and Electric Powertrain at the BMW Group. “Our new competence centre in Wackersdorf will be a core component of our circular value chain and will help make the mobility of the future more resource efficient. We want to find the best way to keep materials in the cycle, ensuring that resources retain their value for further use in the long term. This will also reduce our dependence on primary raw materials. At the same time, the use of high-quality secondary materials will continue to significantly lower our vehicles’ carbon footprint.”

For more than 30 years, at its current location in Unterschleißheim, near Munich, the BMW Group Recycling and Dismantling Centre (RDC) has developed methods aimed at achieving significant advances in the recycling of parts and the recovery of materials, and has tested them in practice. The insights gained by the RDC into the recyclability of components and materials, in line with Design for Circularity principles, are already incorporated into product development at the BMW Group. These insights also feed into the cooperation with PreZero, which the BMW Group recently entered into in order to leverage the strategic and economic potential of the circular economy in end‑of‑life vehicle recycling. 

The recycling industry’s global network also benefits from the work of the RDC. Around 3,000 businesses in 32 countries rely on a shared recycling database for information on how recyclable components can be disassembled cost-effectively and valuable materials efficiently recovered.

At the future site, process, material and technology development will be even more closely integrated with vehicle recycling operations. The new scope of activities at the Competence Centre Circularity includes the recycling of hydrogen vehicles, automation of dismantling processes and development of expertise in innovative shredding and sorting technologies.

The BMW Group sees Wackersdorf as the ideal new location for the Competence Centre Circularity, with BMW Group Plant Wackersdorf having embodied flexibility for decades: Housing cockpit production, the Rolls-Royce door and flap production centre, parts supply for overseas plants and the battery testing centre, the site has wide-ranging expertise and is firmly established within the BMW Group network.

“In recent years, the company has set a decisive course for the future of the Wackersdorf location. Throughout this process, the entire plant team has consistently demonstrated flexibility. Building the competence centre for circularity here provides our site with a broader foundation. In this way, we are tapping into an attractive, future-oriented area of activity,” says Stefan Betz, head of BMW Group Plant Wackersdorf.

“The company is systematically continuing its successful transformation. Establishing the new Competence Centre Circularity here represents an important strategic decision by the company in favour of the Wackersdorf location – and, above all, its employees. As employee representatives, we also supported this,” says André Mandl, Works Council Chairman for BMW Group Plants Regensburg and Wackersdorf.

“In Wackersdorf, BMW has been a strong partner by our side for many decades. We are delighted that the BMW Group is reaffirming its commitment to the location with this move. It sends a clear signal for our site and for sustainable future technologies,” says Thomas Falter, Mayor of Wackersdorf.

“The cutting-edge Competence Centre Circularity will make a major contribution to regional value creation and further development of the circular economy,” adds Thomas Ebeling, District Administrator of Schwandorf District. “In combination with the trechnology transfer centre planned for Wackersdorf by the Regensburg University of Applied Sciences and the University of Applied Sciences Amberg Weiden, close integration of business and academia on the circular economy will now also be possible. In this way, we are strengthening the region.”

Following the location decision, the detailed planning phase for the Competence Centre Circularity at the new site can now begin. The existing RDC in Unterschleißheim will remain fully operational until the relocation. The BMW Group will provide further information on the next steps in due course.